Can the surveillance camera be connected to the computer host?

Some models of surveillance cameras can be connected to the computer host.

The steps for connecting the surveillance camera to the computer host are as follows:

(1) Prepare to install camera accessories, including pliers, screwdriver, camera, camera charger, camera bracket, chassis and BNC connector, and connect them with BNC wires;

(2) Pick up the camera bracket and install the chassis on the bracket;

(3) mounting the camera on the bracket;

(4) Check whether the power supply is the camera power supply;

(5) Connect the power plug and the camera plug;

(6) Take out the BNC wire from the head and cut off the copper wire in the middle;

(7) Take out the BNC interface, connect it with a screwdriver and tighten it;

(8) Fix the bottom with pliers;

(9) After the two ends are connected, connect the camera with the computer host or camera hard disk;

(10) After debugging, you can see the monitoring screen on the computer.