How to install the rearview camera when reversing?

Installation steps of reversing camera:

Step 1: First, remove the power connection wire at the vehicle battery, and put the removed connection wire away from the electrode to prevent the power from being connected by mistake.

Step 2: Determine the installation position of the car camera, which is generally divided into two types.

One is installed on the license plate light. This installation is relatively easy, just use the small screws provided in the camera accessories to fix the camera on the license plate light. By adjusting the iron sheet or gasket in the accessories, the camera can achieve the best reversing angle. The line of the camera penetrates into the car through the gap of the license plate lamp, and is connected with the backup lamp power supply and the video extension cable. This kind of mounted reversing camera is a popular one at present, which is more concealed in appearance and easier to install.

The other is drilling installation, which is embedded in the bumper. The advantage of this method is that there is no need to drill holes in the metal parts behind the car. Because the bumper is plastic, it is relatively easy for the camera to route.

Step 3: Connect the power cord of the camera with the power cord of the backup lamp, then connect the video cord of the camera with the video extension cord, and the other end of the video extension cord is connected with the AV input of the vehicle monitor. Finally, restore the battery power supply, start the vehicle, hang the reverse gear, and you can see the reversing image on the vehicle display screen.