Folding road photography

Do you want to make your painting safer? Follow us step by step to install the tripod for art supplies! This intimate guide will teach you how to assemble the bracket and place the drawing board perfectly, so that your works of art can be displayed stably.

1 preparation stage

Open the packaging bag and take out all the parts. You will see a folded bracket and a thin steel bar. The bracket is retractable, and thin steel bars are used to be stuck under the bracket.

2. Stretch the support leg.

Gently pry open the plastic bayonet on each leg of the bracket, and then stretch outward until it can no longer be stretched. Make sure all three "legs" reach the length you want.

3 Place fine steel bars

Put the thin steel bar under the bracket to ensure that it is firmly stuck in the corresponding position of the bracket.

4 Adjust the bracket head

Stretch the middle of the bracket upward until it reaches the ideal height suitable for displaying the painting. Make sure that the plastic buckle is locked to prevent the bracket head from slipping off.

5 Adjust the angle and stability

Only three supporting legs touch the ground, so you can adjust their positions and holes in the thin steel bars as needed to enhance the stability of the whole structure.

Assembly of wedding poster frame

Just follow the following steps: 1 Take out the bracket to be installed on the bag. Expand the bottom of the bracket, about two feet long, and lay it flat on the ground. Insert the other two poles into the holes in the four corners of the wedding poster. Take out the wedding poster as a display box. 5 From top to bottom, fix the four corners of the picture on the small hook of each foot of the bracket in turn. 6 After adjusting to a satisfactory position, straighten the X-frame.

Installation of tripod

A tripod is an essential artifact for photography. It needs to stand upright on the ground and expand the three foot tubes below to ensure stability. Then open the plate buckle on the foot tube, adjust it to the height you need, and finally buckle the plate buckle. Remember to choose the right tripod material according to your own needs!