How to adjust the lead and standard in fishing technology? Where is the transfer in place?

Experienced fishermen know that when fishing, the float is like the fisherman's eyes, so the importance of the float is extraordinary. Fishermen need to master the skills of ups and downs if they want to have a good harvest. 1. Float adjustment: It refers to setting the balance point of the intersection point between the float and the water surface by increasing or decreasing the weight of the lead drop in the line group. Due to different fishing concepts and different understandings of floating, there are many ways to adjust floating, each with its own reasons. It's hard to say which method is right and which method is wrong. However, when fishing in different waters or catching different species, if the drift adjustment method you are used to is ineffective, it is the best policy to deal with it in time. 2. Float the bait: when floating, hang the bait with a double hook and control the waterline length so that the bait ball does not touch the bottom and the double bait is suspended. The weight of the double bait suspended in the water has been balanced by the buoyancy of the float, and the weight is zero, fluttering in the water. When the fish swims near the bait, the sucked and spit water can drive the bait to move, resulting in the displacement of the float. People who drift in this way, ideologically speaking, are pursuing an absolute sensitivity and always hope to catch fish in the first action of eating bait. However, excessive sensitivity has also brought some side effects-the false signals of floating have increased obviously, and dancing and floating will make you dizzy and at a loss. Although floating with bait will increase the number of fake moves, it is not without countermeasures. The trouble of fake action can be solved by the simple way of adjusting the mind and fishing. For example, you can catch two eyes, three eyes, even five eyes and six eyes by hanging two baits and adjusting one eye. As long as the drift has a signal, it is no problem to fish boldly. For fishermen, if they are not afraid of floating, they are afraid of floating. 3. Baitless drift: Baitless drift can also be said to be empty hook drift. Bleaching is the same as using bait except that the bait is not hung on the double hook. The guiding ideology of this drift adjustment is to ignore the weight of bait and let at least one bait ball fall to the bottom of the water when fishing. This drifting method is widely used by competitive fishing enthusiasts. Its advantage is that spirit and dullness coexist, both offensive and defensive, and it has a certain effect on slippery fish. Of course, this method of drift adjustment is invincible only when fishing crucian carp in competitive fish ponds, but fishing other fish species in natural waters is a mixed success and failure, and there is no absolute advantage. Whether with bait or without bait, it must be carried out on the premise that the double hook does not touch the bottom. Once the hook touches the bottom, it is not allowed to drift. Novices must pay special attention to this. 4. Single hook bleaching: Before bleaching, cut off the bottom hook and keep only one hook. People who like to adjust drift in this way emphasize that one hook must be undercover and the other hook must touch the bottom when fishing, so there is no need to think so much between fishing. This method is simple and practical, and is adopted by most middle-aged and elderly people. For example, if you are used to fishing with three eyes, adjust it to a single hook and half water with three eyes, ignore the weight of a hook, and put a pair of the same auxiliary lines after adjustment. When fishing, let the float out of the water for three eyes. At this time, the bottom hook must be undercover, and the hook also touches the bottom. 5. Real fishing state drift adjustment: The whole process of drift adjustment must be completed in the actual fishing state. (1) Drift at the fishing point after determining the fishing point; (2) using the determined line group to adjust the drift; (3) When fishing, the big line enters the water, and when drifting, the big line also enters the water. When fishing, fish with a pole. If the rope doesn't enter the water, don't enter the water when drifting. (4) Be sure to adjust the float after the float and the line group are fully drained (after soaking for half an hour), otherwise there may be one or two differences for the high-sensitivity float. 6. Semi-Shui Piao adjustment: It means that the double hook must be suspended when drifting, instead of the waterline being half of the water depth. For example, if you drift at a depth of two meters, you don't want to drift with a one-meter long waterline. If you really drift like this, it may not be allowed. Because when you adjust the float, the weight of the one-meter waterline is not included in the counterweight. For a highly sensitive float, there may be a multi-eye difference. 7. Rough adjustment: It means rough adjustment of the bleaching before formal adjustment, then throwing the pole to make a nest while soaking the line, and formal adjustment of the bleaching after half an hour; Because both the float and the fishing line have micropores, they will absorb some water after entering the water. This method of coarse adjustment is to make dry bleaching and trunk line fully absorb water before fine adjustment to ensure accurate adjustment. 8. Fine-tuning: Fine-tuning is generally performed after drift. In actual fishing, it is found that the floating language is not very accurate, only a very small amount of lead skin increases or decreases or the floating moves slightly up and down. For example, when you find that the float has a signal, but you can't catch fish by lifting the pole, or it often happens that the pole runs underwater, you just need to move the float up by one third, and you don't need to adjust the lead weight, which can play a fine-tuning role. You can also add a little lead skin to the lead pendant without floating, so that the fisheye can move up a little; If you start with five catches and three catches, and add small lead, it will become five catches and two and a half eyes. These methods are fine-tuning. 9. Tuning: It means that the balance point of the adjusted float across the water surface is at the high position of the target. For example, adjust two spirits, adjust two spirits and three spirits. But this spirit is conditional, not absolute, and it changes with the change of conditions. For example, I set three eyes, and the double bait just makes the float sink to one eye. At this time, the weight of the double bait in the water is zero. If one eye is replaced and the double bait is as heavy as mentioned above, then the adjustment of three catches and one catch at this time is more effective than the adjustment of one catch in static theory. Because of this, the two baits are completely balanced by the buoyancy of the float because of their own weight, and the fish can suck the bait into its mouth with a light suction. After fishing for a period of time, the self-weight of the double bait is at the bottom of the water. Except that the buoyancy generated by water on the bait can reduce a small part of the self-weight of the bait, the fish will eat it. Only when its suction is greater than the self-weight reflected by the bait will the bait be sucked into the fish's mouth. This is better than tuning three. If the weight of the double bait is still two eyes, now it is changed to four eyes to catch two eyes. Compared with the above three methods, the self-weight of double bait is zero, and the result is that it is more important to adjust three to catch one than four to catch two. Due to the adjustment of four catches and two catches, the residual buoyancy of the float exposed to the water is greater than that of three catches and one catch. Moreover, the diameter of the target of the second destination may be thicker than that of the first destination, and the volume of the second destination is larger than that of the first destination if calculated according to the same length. Then, when the fish suck bait with the same strength, the displacement and speed of the float with three catches and one catch will be greater than that with four catches and two catches. From this point of view, the less the floating mesh (the lower the position exposed to water), the more sensitive it is, and vice versa. 10. Leveling water: refers to setting the balance point of the float at the top of the sight to make it flush with the water surface. Leveling water includes empty hook leveling water and bait leveling water. If you are all fishing with one eye, it is more effective to level the water with bait than empty hook, and the reason is the same as that stated in Article 9. 1 1. Adjustment: By adding or subtracting lead skin, it is the balance point where the above floater intersects the water surface. If you adjust your gaze to the third eye, you are adjusting the third eye. Look out of the water to the fourth eye, then you are adjusting your eyes. 12. Fishing mesh: refers to the number of mesh that surfaced during actual fishing. Setting fish eyes and adjusting fish eyes in fishing are based on eye adjustment to further adjust the sensitivity of floating. The principle of adjusting the fisheye is that the fisheye is lower than the fisheye, and the limit is that the two baits are off the bottom (like adjusting three to catch one); When the fishing eye is higher than the adjusting eye, it will be dull until the lead falls to the bottom (like grasping the belly root by adjusting the second). Adjust and fish several times, which is based on this adjustment. In fishing, we should master the adjustment principle of a fish drift: eye adjustment is the basis and fish eye is the correction. If the setting of the adjusting eye is wrong, no matter how to adjust the fishing eye, the effect may not be ideal, because it is impossible to correct a good effect on the basis of error. 13. Floating balance point: it is a floating "fishing eye". When the float is still on the water surface after being weighted by the line group, the line where the indicator of the float intersects the horizontal plane is the balance point of the float at this time. At this time, the buoyancy generated by the float in the water is equal to the gravity formed by the line group, and it is in a two-force level state. Some people say that I use a big lead pendant and a small float (meaning that the gravity of the lead pendant is obviously greater than the buoyancy). How to balance it? In fact, the gravity of the part of the lead that is out of buoyancy after falling to the bottom is borne by the ground, so as long as the waterline is adjusted correctly, the static float above the water surface is also in balance. The characteristic of floating equilibrium point is that any point of the index can become an equilibrium point, but it will change with the change of line group weight. When the weight of the lead pendant is increased or decreased, the waterline length is lengthened or shortened, and hooks, space beans, floating seats, lead seats and figure-eight rings with different weights are replaced, the balance point of the float will change. Especially in bait-hanging fishing, when the bait is dissolved and unhooked, the highly sensitive float will float obviously. This is the original balance point has been broken, floating in search of a new balance point. When the float floats to a certain position, a new balance is created. 14. Center of gravity of the float:-Vertical float in water. After gradually subtracting the counterweight, the float will gradually rise due to the buoyancy of the water, and when it rises to a certain point, it will tend to tilt. At this point, the point where the float intersects the water surface is the center of gravity of the float. Float with upper center of gravity has good stability in water, strong wind resistance and more accurate and timely signal transmission. 15. Full buoyancy point: the top of the buoy, reflecting the maximum buoyancy of the buoy. The full buoyancy point is also the point reflecting the maximum counterweight of the float. In actual fishing, this point is also the point where the floating residual buoyancy is zero. 16. Residual buoyancy: When the float is in a state of balance and motionless in the water, the indicator part exposed from the water surface is called residual buoyancy. The more eyes above the water, the greater the residual buoyancy, and vice versa. 17. Residual buoyancy is zero: when the top of the buoy is also immersed in water under the action of counterweight, the buoy is in a suspended state, that is, the residual buoyancy of the buoy is zero. When the residual buoyancy of the float is zero, it is also the full buoyancy of the float. Although the floater in suspension is in the most sensitive state, it is of little practical significance, and there is no need to deliberately pursue zero residual buoyancy in order to improve the sensitivity of the floater. Because the spirit of ups and downs in fishing is practical, it always changes from positive to negative according to the different situation of fish and changes at any time, and ups and downs are not as skillful as possible. 18. Drifter's own language: When drifting into the water, it is in a state of balance. In the meantime, he showed his six languages: turning over, standing, pausing, sinking, rebounding and positioning. These six languages have their own specific laws. If there are fish in the middle, it will inevitably break the specific laws of these six languages. 19. Fish message language of floater: The signals generated by fish eating bait are all fish message language. The language of fish information before floating and positioning is sometimes very obscure and difficult to master. Only when you know the language of cloth tickets very well can you distinguish them. The news language of floating fish can be divided into three categories: news language, flood language and news language. 20. Message: When lead falls into the water and bites the bait, it floats downward until the bait sinks to a certain position. During this period, the fish comes to eat, and the message displayed by the float belongs to message. This kind of news language is mixed with floating language, which is sometimes difficult to distinguish without careful observation. Message board is the most colorful message board in hand-held crucian carp fishing, which brings different pleasure to crucian carp lovers and belongs to an alternative enjoyment. This floating in the movement (the expression process of its own language) (the appearance of fish news language) brings a sense of elegance to fishermen. The concrete manifestation of declining language is that the floating rule of one's own language is broken (except positioning), that is, declining language appears (except other factors). 2 1. signal language: This language appears after the bait is in place and the float is still. Generally speaking, there are four representative languages: Xiadun, Piaoxiadun, Songpiao and Heipiao. Look at the signal language of fishing bottom, you don't have to be in a state of high tension as soon as you enter the water from the float, because the fisherman knows in his heart that nothing will happen before the bait is in place, and everything will appear after the float is positioned. 22. The second message: Do not eat bottom fish. Out of desperation, they gently pull the float, driving the bait to leave the bottom of the water and sink again to lure the fish into the bait (I call this passive method of attracting fish "disturbing the bait"). The fish information language that appears between the bait leaving the bottom and repositioning is the second information language. There are several manifestations of language: (1) After the floating disk is pulled up, it should sink again in a certain period of time. If it doesn't sink after this time, it means that the fish has sucked the bait into its mouth at the moment when the bait leaves the bottom. (2) When the float sinks again, it suddenly accelerates to sink. This is when the fish sucks the sinking bait into the mouth at the bottom and pulls the float, causing the float to sink faster. (3) When the float is pulled, it fails to float in time. At the moment of pulling the float, the fish sucked the bait that had just left the bottom into its mouth, contained the float and prevented it.