How to configure the most suitable radiator for desktop computers?

The wattage of radiator depends on the specific situation. Generally speaking, about 500 watts is more suitable.

The wattage of the radiator needs to be determined according to the computer configuration and use requirements.

If the computer configuration is high and the requirements are high, the wattage of the radiator needs to be larger to ensure the heat dissipation effect.

On the other hand, if the computer configuration is low and the use demand is small, then the wattage of the radiator can be appropriately reduced.

In addition to the wattage, the size of the radiator and the number of fans should also be considered to ensure that the radiator can cover important components such as CPU, and at the same time maintain the appropriate fan speed to achieve the best heat dissipation effect.

In addition, the choice of high-quality radiator can also improve the heat dissipation efficiency and prolong the service life of the computer.

What is the best computer configuration for ddr3 1600?

If the overall price of U+ motherboard is considered, LGA20 1 1 platform is not recommended. Still recommend LGA 1 150 platform. The strongest overclocking CPU supporting DDR 1600 is the fourth generation I74790K. Although the I7 processor has been updated to the eighth generation, this CPU is still very cost-effective, and the second-hand online price is about 1700 yuan.

I. Specific parameters of Intel Core i74790K:

1, applicable type desktop, 64-bit processor, manufacturing technology 22 nm, core code CPU architecture Haswell, slot type LGA1150;

2. The main frequency of 2.CPU is 4GHz, the dynamic acceleration frequency is 4.4GHz, the number of cores is four, the number of threads is eight, the three-level cache is 8MB, and the bus specification is DMI 25 GT/s;

3. Thermal design power consumption (TDP) is 88W, and the maximum memory is 32GB. Memory types are DDR3 1333/ 1600MHz, ddr3l1333/1600 MHz @1.5v, and the maximum number of memory channels is two.

4. Integrated graphics card IntelHDGraphics4600, the basic frequency of the graphics card is 350MHz, the maximum dynamic frequency of the graphics card is 1250MHz, and other features of the graphics card: the maximum memory of the graphics card is 2GB.

5. Turbo Boost Technology Support, 2.0, Hyper-Threading Technology Support, Virtualization Technology IntelVT-x, Instruction Set SSE4. 1/4.2, AVX2.0, 64bit.

Second, advantages:

1, i7-4790K belongs to 22nm HaswellRefresh architecture, and has no frequency doubling lock. The fundamental frequency is 4.0-4.4GHz, which is Intel's first CPU. The fundamental frequency exceeds 4.0 GHz:

2. Because of Turbo technology, the frequency of i7-4790K actually reaches 4.2GHz when four cores and eight threads are fully loaded; This CPU has stronger overclocking potential by improving the original packaging and internal heat dissipation medium;

3. Intel matched a new polymer heat dissipation material (NGPTIM) for this processor to improve the heat dissipation efficiency of the processor core, and at the same time added capacitive elements to ensure a more stable current supply for the chip.

4. The original fan runs very quietly and has stable performance. Even if it is not overclocked, the i7-4790K can achieve the goal of 4.4GHz through the "Turbo Frequency" function on the Z series motherboard.

5. overclocking: good heat dissipation. Although the voltage of i7-4790K is high, the phenomenon of heat accumulation in the core is alleviated by improving the heat dissipation medium, so the core temperature is not high, and it can be overclocked to 4.6GHz in the air-cooled state.

6. The most important thing is that the performance evaluation score is also very high so far, and there is no pressure to play mainstream large-scale games in the later retouching video clips 20 17.

If you like mine, please click on the top right corner to pay attention to "I love learning photography" and update the original photography teaching video every day.

Recently, due to the high price of DDR4 memory, ASUS, Colorful and other manufacturers have introduced H 1 10 motherboards that support DDR3 memory or both DDR3 and DDR4, so now the strongest processors can use a full range of seventh-generation processors such as i77700K and i77700.

Not to mention much, i7-7700K is the last generation of i7-level CPU that officially supports DDR3 memory (although it is DDR3L). It is said that someone successfully lit the eighth generation Core on DDR 3 with H1kloc-0+DDR 300, but according to official parameters, i7-7700K is the last generation that supports DDR 3-1.

At present, Intel only has motherboards with interfaces below 1 150 and AMD interfaces below DDR3.

Let's start with Intel. Since the sixth generation, all the interfaces of Intel are 1 15 1, which is the fourth generation memory chip. Then only the fourth generation or below is the 1 150 interface and DDR3 memory stick. Among the four generations of CPU, i74790k is the best and supports overclocking.

The premise is to overclock with Z series motherboard. At that time, the best motherboard was z97.

Let me explain here that the mantissa band K of Intel processors is unlocked for frequency doubling. For example, 4790k6700k7700k8700k can be overclocked, but it needs to be matched with the motherboard at the beginning of Z series to turn on overclocking. If it doesn't have a k, it can't overclock. For this kind of CPU, it is recommended to buy mid-range motherboard B series and low-end H series with higher cost performance. In order to get a good overclocking effect, it is recommended to buy overclocking memory chips, such as the magic wand of Kingston hackers, and the overclocking power supply should not be too bad!

Let's talk about AMD. AMD has been the fourth generation memory chip since am4 interface, and only below am3 supports DDR3. The strongest is fx series 9590, but the power consumption of this CPU is too high in China, so the best is 8370.

This CPU is overclocked with the best 990fx motherboard, but the power supply must be good. AMD consumes much more power than Intel!

All right, I'm going to feed the pigs. The above is the best motherboard CPU in China with the support of DDR3 memory chips from Intel and AMD. I think I'm right, please praise it and leave a message in time to point out thank you!

It should be that e5 1680v2 can exceed 8 cores, and the performance of 4.9g is probably better than that of two 6700k mute frequencies.

Film and television homework recommends family entertainment and simple requirements.

1 150 series, the cpu checks i74790k, the default is 4g to 4.4g, and the overclocking full core is 4.6g. Look at the motherboard when the heat dissipation is sufficient.

The radiator looks good at the high-end of Owl and Limin, but the price is not very good.

Finding the motherboard of z97 is almost the same. Go find ASUS and MSI yourself. The high-end motherboard material will not be too bad, mainly to observe whether there are many heat sinks and whether there are heat pipes to conduct heat.

Memory can also exceed 1600 to a maximum of 2 133. Look at memory particles and motherboard stability. Generally more than 1800.

The power supply only outputs 12v. Because of the large current, this power supply is best brand-new, and it is best to choose a non-module power supply. The price is not beautiful, the high current is very strict with wire, and the copper price has not dropped much. Great Wall, Hangjia.

It is best to use a set of acrylic bare frame to see the environment of the chassis. The environment is generally open and poor. Buy 12 generation i3 or 10 generation i3.

Finally, it is suggested that the price of the above set is above 3000, and now the market does not contain graphics cards.

Single-board U memory, 3000 high board and low u( 12 generation i3 or 10 generation i5) is better than 1 150 series. In the case of stronger architecture, lower temperature and faster algorithm, it is suggested to set a set of 10 generation i5 6 core 12 threads, which can perform better than the fourth generation chicken head in both performance and operation. Later, we can go further to i7 or even i9. As long as the motherboard and memory (frequency can be ignored and then replaced and upgraded after reaching 3000), it is enough to leave a motherboard with 4 memory slots of 16 16 or 3233 for personal use, and the power supply is directly started at rated 750. If you exceed this rated wattage, you should match it according to your personal economic situation. Because it is best to separate the wiring between the dedicated socket and the home socket, otherwise it will easily damage the computer.

U exceeds 4.6, memory exceeds 1866, and heat dissipation keeps up. As for playing games, I don't think it's worse than their 7 th and 8 th generations! Change a good graphics card, change a high-frequency memory, and you can also play. My broken motherboard, is its performance okay?

The strongest model of HaswellRefresh processor is Intel core 7-4790k. This lock-free frequency multiplier processor with the core code "DevilsCanyon" is also the final flagship version of the 20 14 Core i7 "K Series" processor. Due to the improvement of power supply and heat dissipation materials, its default main frequency is as high as 4GHz, and its maximum core frequency is accelerated by 4.4GHz.

Just look for the h3 10itx small board that supports d3, the one used in the all-in-one machine. The last i58500 was no problem

What computer configuration should I use to make a game studio?

Different from home computers, considering the future development, the configuration of studio computers is also different from home computers, and economy, applicability and future development should be considered. For example, what should I do if I play 2D games now and 3D games later? So the current trend is to configure 4H (nuclear) computers. Because the studio computers are turned on for 24 hours, it is relatively stable to choose military products from first-line manufacturers. Here are several configurations, namely Daikin Studio's training studio configuration and 4H computer configuration.

One of Computer Configuration Tables-4-Core Computer Economy

As we all know, AMD computer is the most cost-effective gaming computer, so configuring AMDCPU computer is the first choice for the studio.

CPU-AMD Athlon IIX464 1 (scattered) 425 yuan

Main board-Gigabyte GA-A55M-DS2 (version 3.0) 499 yuan.

Hard disk-WD500GB7200 rpm 16MBSATA3330 yuan

Memory-Kingston 4GBDDR3 1600*2274 yuan

Graphics card —— 740 yuan used by INTECH GTX550Ti Tiger Plop.

Power supply-Great Wall dual power mute BTX-400SEL-P4260 yuan

Chassis-it is best for ordinary large chassis to radiate 100 yuan.

Optical drive-the studio doesn't need this. Save money!

Total price: 2628 is only the host configuration. I suggest you use LAN monitoring software, one computer controls all computers or about ten computers, saving money and trouble! And that radiator, you'd better install another one yourself. The original one is not very powerful. It turns like a bomber. It is suggested that overclocking three Huanghai cool version S90H70 should be around 70 yuan.

Computer configuration table 2 4-core high-end configuration server CPU

At present, most studios use Intel Xeon E3- 1230, which is a very powerful configuration. The game is more open and configured as follows:

CPU-E3- 1230V2 Official Edition 1300 yuan

Motherboard-Gigabyte GA-B75m-D3V (Rev.1.1) 600 yuan

Hard disk -WD 500 GB 64 MB SATA 3500 yuan

Memory-Kingston 8GBDDR3 1600*2500 yuan

Graphics card-Sapphire HD6850 1GBGDDR5 Extreme Edition 1000 Yuan

Power supply -BTX-500 S (one model), King of the Great Wall Quad-core, 400 yuan.

Chassis-It is best for ordinary large chassis to radiate 100 yuan.

Optical drive-the studio doesn't need this. Save money!

Total price: 4,400 yuan. It's just the mainframe.