Traditional Culture Encyclopedia - Photography major - How to tie eight sub-rings and sub-threads

How to tie eight sub-rings and sub-threads

The method is as follows:

1. First tie one end according to the simple method of tying a fishhook, as shown in the picture below:

2. Then tie both ends Fold the fishing line in half, as shown in the picture below:

3. Fold one end of the line in half and pass it through the figure-eight ring, as shown in the picture below:

4. Wrap the end of the thread in a circle to form a knot. It looks like the picture below:

5. Both fishhooks pass through the middle of the two strands of the folded thread, as shown in the picture below:

6. Apply force after passing through Just pull the ground, as shown in the picture below:

Note:

The number used for the sub-line is usually smaller than the main line (ie, the road system), which is usually the main line. 0.4-0.8 times. The purpose of using the sub-line is to ensure that the main line is not broken or strained unnecessarily when hanging on the bottom or catching larger fish (for example, the main line is No. 1.0, and the sub-line can be No. 0.6 or smaller. The assembly will break the sub-line due to excessive tensile force and save the main line and main line accessories). The quality requirements for sub-threads and main threads are different: sub-threads are required to be more resistant to curling, softer, less likely to be tangled during use and easier to enter.