Male model figure standard

Male model body standard. Being a male model is not enough. For many models, body management is very important, and diet is also strictly controlled. As a model, you must first have comprehensive qualities in all aspects. So what are the body standards of male and female models? The following is the relevant information I have compiled. For your reference.

Male model figure standard 1

Conditions of the model:

1, height: male 182~ 190, plus or minus several centimeters;

2, the ratio of upper body and lower body: a key parameter, you can ask parents or friends to help, measure the distance from the nape of the neck (the most prominent part of the nape when holding the chest and lowering the head) to the tail keel (the small bone pointed in the middle of the hip). This is the length of the upper body; Measure the distance from the hip fold (the dotted line between the rear thigh and the hip when standing upright) to the ground (barefoot), which is the length of the lower body; Subtract the length of the upper body from the length of the lower body to get a value, which is the ratio of the upper body to the lower body. The ratio of upper and lower body of the average person is about 10~ 12cm. If your ratio exceeds 14cm, congratulations, you are qualified as a model. If it reaches 20cm, add new ideas as soon as possible. As far as I know, one player who reaches 2 1cm will be very good.

3, measurements, in fact, the most important thing is the curve ratio, the absolute value is not so strict, bust >; Waist circumference is more than 26cm, hip circumference and chest circumference are basically equal (hip circumference in Asians >; Chest circumference 4~6cm) That's no problem.

4. Poor physical appearance includes: shoulder cutting, spine bending, severe chest hugging, physical disability, skin discoloration, etc. I'm sure you don't have to worry about this.

First, the calculation steps of figure scale

1. Judging the face shape and head length: comb all the hair back to reveal the outline of the face shape, judge your face shape, and then take a ruler from the top of your head to your chin (based on the proportion of bald head) to measure the length of your face.

2. Measuring height: It is accurate to measure height, flatten your hair and straighten your body.

3. Calculate the proportion: height, head length = head and body (this is the so-called height proportion standard).

For example, if your height is 159cm and your head length is 20cm, then 159 (height) ÷20 (head length) =7.59 (head and body). After rounding, you are the standard ` 8-headed body!

Second, the reference size of standard measurement.

Please refer to table 1 for the dimensions of standard measurement:

Table 1

Height170cm164cm158cm152cm.

Chest circumference 88cm 86cm 84cm 80cm

Waist circumference 68cm 66cm 64cm 62cm

Hip circumference is 94cm 90cm 86cm 82cm.

(Note: 1 inch = 2.54cm)

Third, the new fashion formula

Standard weight (kg) = (height-100 cm) × 0.9

Standard bust (cm) = height (cm) ×0.54

Standard hip circumference (cm) = height (cm) ×0.53

Standard waist circumference (cm) = height (cm) ×0.37

Standard thigh length (cm) = height (cm) ×0.3

Standard leg length (cm) = height (cm) ×0.26

Male model figure standard 2 First, male model requirements:

1, height185-192 cm; ;

2. Shoulder width: 52cm-55cm；; ;

3. Chest circumference:105cm-115cm;

4. Hip circumference: 90 cm-100 cm;

5. Body proportion: the upper body should be short and the legs should be long.

Second, the male model standard scale diagram:

1, weight = height-112;

2. Abdominal circumference = height * 0.457;

3. Chest circumference = height * 0.52;

4. Hip circumference = height * 0.542;

5. Waist circumference = height * 0.37;

6. Leg circumference = height *0.2678.

Third, for the proportion of the model's figure, it can probably be analyzed from the following aspects:

(1) body type

1, example of upper and lower body ratio-the requirement for models is that the lower body is longer than the upper body.

2. Example of calf ratio: The ratio of calf to thigh is close to or slightly longer than thigh.

3. Head-to-body ratio: The head length is 1/7~ 1/8, and a smaller head will make the figure more dexterous.

4, measurements: to have a good bust, the waist circumference is best not to exceed 60 cm, the buttocks should be narrow, preferably within 90, and the buttocks should not sag.

(2) Appearance

For runway models, although the appearance is not as prominent as the figure, it is also a very important external factor. For us, the ideal head shape is oval, and the face shape is not too wide, but a little longer. Regular facial features are the minimum requirement, not necessarily beautiful, as long as you have personality, you can still stand out.

(3) Gas quality

An excellent model often has a distinctive temperament. It includes people's posture, expressions, manners, manners and so on. As a model, it is not enough to have a good figure and facial features, but also a good temperament to set off a wonderful fashion. It is very important for models to always pay attention to their inner cultivation and appearance.

(D) Cultural foundation

Cultural knowledge can add points to model performance. Such as music knowledge, dance knowledge, costume design, photography art, stage lighting and so on.

Professional consciousness

The professional feelings of models generally include clothing feelings and stage feelings. The so-called clothing sense is an intuitive judgment of clothing, that is, a person who can be familiar with the fashion trend of clothing, know which style is suitable for which style and temperament, and master the personality requirements of his own image.

(6) Show your ability

Display ability includes two aspects: stage performance skills and display clothing. Stage performance skills are generally cultivated through professional training.