How to shoot a mobile phone

Most electronic products have smooth surfaces, such as flip phones, which easily reflect other objects. How to take photos of electronic products without reflection? A simple and economical coup, I use a piece of A4 white paper, dig a small round hole in the middle, hide the camera behind the white paper, and the lens protrudes from the round hole, so that my figure will not be reflected in electronic products.

Dig a hole in the middle of a piece of A4 white paper, and the lens protrudes from it to eliminate the shadow reflected from the surface of the mobile phone.

The shadow problem has been solved, but what should the studio do? Don't worry, listen to me first about a DIY studio.

My method is simple and cost-effective. As long as I can use waste, I won't use new ones. Now I advocate environmental protection. Let's go one step further and be an environmental protection studio. First, find a waste paper box and lay A4 white paper on three sides of the box. In order to prevent the white paper from slipping, it can be slightly processed before putting it, and three white papers can be glued into a cube with transparent tape. When finished, the cube will be put into the paper box, which will be transformed into a simple soft light photographic box.

The mobile phone is tilted in the middle of the photo box, the lens passes through the white paper, and the light shines on the mobile phone, ready to start shooting.

If you don't use white paper to block the projection, a thick shadow will appear on the surface of the mobile phone. Although the consequences are not serious, buyers will definitely not like it.

There is no white paper in front of the camera, and there is a shadow on the surface of the mobile phone.

Although the camera's own flash is necessary, it must not be omnipotent. Can you believe it? Try shooting with a flash. The result is bound to be very bad. The mobile phone is as black as paste, with no details at all.

The flash is not working. Is it okay to use a desk lamp as a light source? Sure, but the lighting of the desk lamp is also very particular. If the illumination angle is too low, there will be a thick shadow.

Raise the position of the desk lamp and illuminate the whole mobile phone. But because of the distance, the light will be weakened accordingly. What shall we do? Should we use a large aperture at this time to increase the light input? Unfortunately, if I had the same idea, I would get a failed photo.

Using a large aperture to shoot a mobile phone, the picture is not sharp enough and the details are not prominent.

Finally, try a small aperture. The photos taken are sharp and can show the smooth surface and texture of the mobile phone.

For an online shop product map, it is not enough to just take an appearance map. At this time, it is necessary to take some detailed maps. You can turn on your phone and take close-ups of screens, buttons, interfaces and other details.