How to open the 360 panoramic image of Geely Job?

There are two ways to start the 360 panoramic image: 1, which can be opened manually. There is a "parking image" on the second page of the homepage, which can be opened by clicking; 2. Shift the shift lever to reverse gear (R gear) and press enter directly to open the reversing image. The 360 panoramic image is usually powered by the car cigarette lighter, so once the car is turned off, the 360 panoramic image will be automatically turned off.

360 panoramic camera The 360 panoramic camera is located under the logo, on the lower edges of the left and right exterior rearview mirrors, and on the decorative strip of the rear license plate light.

Enter the panoramic image interface: shift the gear lever to reverse gear (R) to directly enter the reverse image screen; Click the "Parking Image" icon on the display screen to enter the reversing image interface.

The required speed range of 360 panoramic image system is 0-30km/h.

Exit the panoramic image interface: When the reverse gear enters the 360 panoramic image, if "R gear exits for 5 seconds" (in-vehicle setting) is selected, the 360 panoramic image will automatically exit after 5 seconds of exiting the R gear. If the "R-gear exit delay of 5 seconds" is not selected, the 360 panoramic image will automatically exit when the vehicle speed is higher than 30 km/h. ..

If you use the R file to enter the panoramic interface, you are not allowed to exit the panoramic interface. The DVD hard switch button is invalid, and the back button in the lower left corner of the panorama is gray and cannot be operated. If the DVD main interface manually enters the panoramic image interface, the DVD hard switch is effective, and the back key in the lower left corner of the panoramic interface is white and can be operated.

The 360 panoramic image interface is operated to enter the panoramic image interface, and the DVD interface will display the animation of panoramic parking for 3D and looking around for half a week. When the rotating animation is finished and the speed is between 0- 15km/h, the left and right split screen interfaces will be displayed.

One-way image display area;

2. Panoramic top view; The menu includes: static trajectory on/off, dynamic trajectory on/off, fisheye correction on/off, R file exit 5-second delay on/off, one-way reversing image on/off, system version number, etc.

1. Static auxiliary line.

2. In the 360 panoramic image mode, the dynamic auxiliary line vehicle can switch the left view and the right view to the corresponding perspective by turning on the turn signal.

When using, you should observe the situation around the car body, and don't rely entirely on the panoramic image system, which can only be used as a parking aid.

(Photo/Text/Photo: Ask and Answer the Beast) Model Y Model 3 Model X V Li ONE Xpeng Motors P7 @20 19