How does the Yuntai camera connect to wifi?

Where is the wifi module of Xiaobai smart cameras Yuntai Edition?

1. Connect the power to Xiaomi smart camera. When the indicator light flashes yellow, you can enter the distribution network state.

2. Open Mijia app, select the+button at the top right, and select Add Device.

3. Find the camera model, click on the wifi to be connected, and enter the password.

_ 1. First, download realmeLinkAPP in the app store and log in to your account.

2. Click the icon "+"on the homepage, and select Security -realmesmartcaminer in the "Manual Add" interface. At this point, the interface jumps to the WiFi connection interface, select a WiFi signal that you want to connect with the Yuntai camera, enter the password of the WiFi, click Save, and then click Next. (Note: At this time, you need to select an available WiFi network and enter the password. The device does not support 5GWiFi and passwordless WiFi. Principle of camera networking: After entering the WiFi password in realmeLink and selecting to add a device, the Yuntai device in the network distribution state will also send out a WiFi signal, and the mobile phone will automatically and temporarily connect the WiFi signal sent by the Yuntai device for data transmission, so that the device can obtain the WiFi password and connect WiFi).

3. At this time, confirm whether the indicator light of Yuntai camera is in a red light flashing state (waiting for distribution network). If yes, select red light flashing and click Next; If the pan/tilt indicator doesn't flash red, press and hold the reset key at the bottom until the prompt tone sounds, indicating that the reset is successful, and the pan/tilt indicator enters the flashing red state. (Click "I don't see the red light flashing" below to enter the reset boot page).

4. At this time, realmeLink will enter the device search state, search for nearby Yuntai cameras that send out WiFi signals, and select the searched devices for pairing connection.

5, the binding device needs to wait for almost 60 seconds, if the phone is turned on in the WiFi assistant.

6. After the binding is completed, you will jump to the step of setting the name, and you can customize the name of the Yuntai device. This operation can only modify the name displayed on the APP page, and the name will not change when the Yuntai camera signals.

How does the wireless camera connect to wifi?

The wireless camera is easy to install and can be used only by networking, which is very suitable for home use. How does the wireless camera connect to wifi? Let's take a look together ~

How does the wireless camera connect to wifi?

Method of connecting Xiaomi camera to wifi:

1. Turn on the power of Xiaomi smart cameras, wait for the yellow light of the indicator light to flash, and enter the distribution mode.

2. Open Mijia APP, click+in the upper right corner, and click Add Device.

3. Select the model of Xiaomi camera, click on the WiFi to be connected, and enter the password to connect.

The method of connecting fluorite camera to wifi;

1. Open the fluorite cloud video, add the camera to the fluorite cloud account, and connect the mobile phone to the router WiFi.

2. Click the three points on the right side of the device name on the fluorite page of the APP, and then click "Settings".

3. On the device settings page, click "Wi-Fi Network" and configure the camera with a WiFi network according to the page prompts.

Joan's camera connects to wifi: Open Joan Zhilian, click+in the upper right corner, select the connection method, click the camera to be connected, enter the WiFi password, and successfully connect to WiFi.

This paper takes Xiaomi smart cameras Yuntai version of fluorite C3W Qiao Anja-H35 Xiaomi 12 as an example, which is suitable for MIUI 13 system Mijia V7.2.70 1 fluorite cloud video V6.3. 10 Qiao 'an Zhilian v5.3.3 version.

How to connect a 360 camera to a wireless network?

With the introduction of home monitoring equipment into our lives, more and more friends have installed monitoring equipment at home to ensure the safety of parents, the elderly and children. So how does a 360 camera connect to a wireless network? Let's take a look together ~

How to connect a 360 camera to a wireless network?

1. Turn on the camera and press and hold the reset button on the back of the camera to enter the camera network distribution mode.

2. Log in to the 360 Camera app, click+in the upper right corner, click Add Device, and select the camera type to start adding devices.

3. Click on the word "Start Connection", click on the heard prompt tone, select wifi and enter the password to connect the mobile phone to the wireless network close to the camera.

This paper takes the 360 smart cameras Yuntai 7C Super Clear Glory magic3 as an example, which is applicable to the version v7.4.8 of the 360 camera of MagicUI5.0 system.