Traditional Culture Encyclopedia - Photography and portraiture - Self-evaluation of architectural engineering
Self-evaluation of architectural engineering
Self-evaluation is an individual's self-summary of his study or work life for a period of time. It is a good way to increase his talent, so prepare a self-evaluation. But I found that I didn't know what to write. The following is the self-evaluation of construction projects (5 general comments) compiled by me for your reference only. Let's have a look.
1 year has passed and the calendar has quietly turned over. With the pace of the times, reviewing the work experience of these two months, I made the following personal work summary:
(A) self-reflection, face up to shortcomings. Self-reflection, face up to the shortcomings.
"Do things seriously and be a down-to-earth person" has always been my motto. Although we work hard, we are always one step away from perfection. After two months of hard work, there is no big improvement and no big mistakes. The mediocre performance made me more aware of my own problems: First, I was not particularly familiar with the construction specifications. Second, there is no field work experience.
(2) Work experience
Although I have just left school and entered the blue sky department of XX Group for only two months, I deeply feel that "only learning can make it clear". When I first came to the project, Gong Liu asked me to calculate the engineering quantity, which was the first time for me. I feel a little nervous and a little surprised. Through my continuous consulting, I finally finished my first answer sheet. After that, I calculated the area of fire retardant coating for steel structure members, the amount of steel structure concrete, the area of steel structure wall, the area of roof profiled steel plate and so on. By calculating these quantities, my reading ability of drawings has been greatly improved and my understanding of building codes has been strengthened. "How can you see a rainbow without experiencing wind and rain?" Forging yourself is the only way for everyone. Through reflection on the problem, I deeply realize that the most difficult thing for a person to overcome is actually himself. Sometimes our actions are in the blink of an eye. From left to right, it depends on our mentality. It is up to us to choose whether to make positive progress or to stagnate hastily. If you choose the former, you will be full of energy and spirit; Choosing the latter is bound to be a dead end and weak will. If you lack enthusiasm for your work, you will lose morale, people will have no motivation to move forward, and even pass by opportunities, because opportunities will only be reserved for those who are prepared.
(3) Work plan, focusing on perfection. Work plan, focusing on perfection.
Summing up the past is to better face the future. For the future work, I put forward the following plans for myself: First, due to my lack of work experience, I usually pay attention to self-pressurization, make good use of my own time to read more books about the construction industry and consult more experienced colleagues. I believe that "nothing is difficult in the world, I am afraid that there is a will." Only pay, there will be gains. Second, never put off till tomorrow what you can do today. As President Yao said, "The sky is over, the sky is fine, and the sky is high". The third is to adjust the mentality and innovate for change. Mentality determines the quality of work, so we should constantly adjust ourselves in our work and always meet the daily work and challenges with full enthusiasm. Only by constantly seeking innovation in thinking can work shine brilliantly. The years are silent, but the steps are eternal. As long as I work hard, I think my tomorrow will be better.
Self-appraisal of construction engineering 2 First of all, I am a farmer's child. I grew up in the countryside, and the countryside cultivated me into a strong and self-reliant person. Although she is not as wonderful as the city, she can better understand the true meaning of struggle. I always thought that growing up in the country was one of the best life experiences.
Later, I turned my back on others and went to college with my own expectations.
University is a "learning place where I can really grow up". University not only taught me real skills, but more importantly, she taught me how to study and how to look at the complicated things in the world with correct and unique methods and eyes. I think this is the foundation of a better world.
I have never wasted this word in my college life dictionary! I really do what I like and do good things. In my study, I am good at everything except my poor English. I am the second in my class in my second year of high school. I am also familiar with the operation of office software. Autocad is also familiar (with advanced certificate). In addition to these "businesses", I also constantly enrich and improve myself in my spare time. From my freshman year, I joined the college radio station as an officer, then as the deputy director of photography, and then as the deputy stationmaster of the radio station. Along the way, I kept climbing with my own ability. In this process, I also learned a lot, such as interpersonal communication, organization and management-more importantly, it taught me what responsibility is! I am very interested in literature and art, and I often study as entertainment in my spare time, so I have certain ability of writing, sketching and photography.
I know the reason why I can't build a good car behind closed doors-I seized every opportunity to go out to work in society in college. During the summer vacation of my freshman year, I participated in the "Three Rural Areas" reservoir safety survey organized by the school, and experienced the ups and downs of working in Shan Ye on a hot summer day. In the summer vacation of my sophomore year, I seized the opportunity to do two "summer internships"-one was to work as a draftsman in a design company in Panyu for one month; The second is to do model construction in the provincial institute of water conservancy science. These work experiences have made me more mature and prepared for entering the society.
Also, although I am a little small, I am in good health. It is easy to be kind and optimistic. I often wear such a hat for myself: "pragmatic idealist"! Because the realization of ideals must be pragmatic.
Although my student career is coming to an end, my study career, like my current construction responsibility, is lifelong.
As a graduating architectural design major, social practice is an important link in our university life. During the winter vacation of my junior year, I was fortunate to be an intern in the architectural design institute of XX County, Yunnan Province. During the nearly one-month internship, I contacted some operations of architectural design, became familiar with the drawing of architectural plane, elevation and section, and accumulated certain social experience. I was instructed by an engineer named Huang, whose practice was mainly the application of architectural design software such as auto cad. Under the guidance of engineer Huang, I quickly became familiar with the relevant operations, with a more solid foundation, more comprehensive technology and improved practical operation ability. The following are some processes and experiences of my internship.
This is my first internship in the company. When I first came here, I was very nervous and didn't know how to get along with others. After several days of internship, I found it not difficult to get along with my colleagues. When you meet something you don't understand, ask more questions. At the same time, you will have more opportunities to communicate with your colleagues. This not only solves the problem, but also can quickly integrate into the group. Here, we should study hard and ask questions, communicate with others more and be honest with others.
Through this internship, I feel that I have gained something in design. Internship is mainly to promote the improvement of our future work and business ability, enhance our future competitiveness and add a cornerstone for our future foothold. Huangshi, the internship unit, also gave me many opportunities to participate in their design, which made me understand many problems that were difficult to solve before and the problems I will face in my future design work. This internship has enriched my knowledge in this field, made me step forward to a deeper level, and promoted my foothold in the future society to a certain extent. However, I also realize that it is not enough to rely on internship these days, but also to accumulate bit by bit in my usual study and work and constantly enrich my experience. The road ahead of me is still very long, and I need constant efforts and struggles to really walk well. I firmly believe that through this period of internship, the practical experience gained will benefit me for life, and will be constantly verified in the actual work after graduation. I will continue to understand and appreciate what I have learned in my internship, and apply my theoretical knowledge and practical experience to my future practical work to fully demonstrate my personal value and life value. Strive to realize my ideal and bright future.
Thanks to the teaching of my predecessors, this internship not only made me gain a lot in my major, but also taught me how to get along well with my colleagues, ask them modestly, and communicate and coordinate with people majoring in structural hydropower. My personal experience and familiarity with the workflow of the design institute have broadened my horizons. I am very happy and satisfied with my colleagues in the design institute. They helped and guided me like friends, teachers and elders, and I am very grateful to them from the bottom of my heart.
In a word, after this internship, I really improved my professional skills and my ability to deal with people in reality. At the same time, I have accumulated knowledge for my future graduation design. I am very grateful for this internship opportunity, which has laid a solid foundation for my future work.
Self-appraisal of architectural engineering 3. Through a week's cognitive practice, we have a preliminary understanding of the structural composition, structural principles and construction methods of houses. Further improve the understanding of architectural culture, architectural knowledge, construction and building materials, consolidate and expand the theoretical knowledge learned, and improve learning enthusiasm.
Let's summarize the combination of internship and theoretical knowledge and the gains.
1. Structural form: At present, the building mainly adopts frame structure or frame shear wall structure, and brick-concrete structure is also available but rarely used. The two construction sites we visited both adopted frame-shear structures. It is a combination of frame structure and shear wall structure, which absorbs their respective advantages. It can not only provide large space for building layout, but also have good lateral force resistance. This kind of structure is to arrange a certain number of shear walls in the frame structure to form flexible and free use space to meet the requirements of different building functions. It also has enough shear walls and considerable rigidity. The stress characteristics of frame-shear wall structure are new stress forms composed of two different lateral force resisting structures, namely frame and shear wall structure, so its frame is different from pure frame structure, and the shear wall in frame-shear wall structure is also different from the shear wall in shear wall structure.
In the design of brick-concrete structure, in order to strengthen the spatial stiffness and integrity of the building, so as to avoid or reduce the damage of the building in the earthquake, according to the seismic code, we set up a certain number of ring beams and constructional columns to enhance and improve the tensile and crack resistance of the building. Provisions on the setting position of constructional columns: the code stipulates that no matter how many floors of the building and the earthquake intensity, they should be connected at the four corners of the external wall, the intersection of horizontal wall and vertical wall, the two sides of the larger hole, and the external wall and the internal horizontal wall of the large room. The parapet of the master's roof should also be equipped with a cross beam with a large span of constructional columns. If there are no battlements or pads, there should be constructional columns.
In the frame shear wall structure, in order to strengthen the integrity of the block partition wall, structural columns or ring beams should be set at the appropriate position of the block partition wall, which is the same as the brick-concrete structure.
Second, construction joints, deformation joints, construction joints of post-pouring belt: due to the limitation of construction technology, the joints formed by the planned interruption of construction are called construction joints. Because the concrete structure is poured in layers, the gap between this layer of concrete and the upper layer of concrete is the most common construction joint. So it's actually not a seam, but a face. Because the joint surface formed by concrete pouring is prone to various hidden dangers and quality problems, different structural projects need to treat construction joints with caution.
Deformation joints include expansion joints, settlement joints and seismic joints. Their function is to ensure that the house has a certain degree of freedom of expansion and contraction when the normal temperature changes, the uneven settlement of the foundation or the earthquake, and to prevent the wall from cracking and structural damage. Post-pouring belt is a method to replace deformation joints of high-rise buildings. Its practice is to leave a gap with a width of 800mm ~ 1000mm every 30m ~ 40m, and not to pour concrete for the time being. Lap joints can be used for reinforcement in joints. When the load is almost stable, concrete is usually poured two months after the structure is capped. Post-cast strip is used for buildings with a building length of more than 50 meters. When the building is a frame structure with a length less than 50 meters, in order to ensure the integrity and certain rigidity of the building, unit walls are set to increase the integrity and rigidity of the building. Settlement joint: a joint set to overcome the uneven settlement of the structure. For example, there are great differences between the parts of the superstructure, whether it is the number of floors or the use load; Or because of the great difference of foundation compressibility, it is necessary to set joints to divide the structure into several parts, so that the settlement of each part is more uniform and additional stress is avoided in the structure. This joint is called "settlement joint". The expansion joint must be completely separated from the foundation to the superstructure: if the plane size of the building is too long, it may cause excessive temperature stress in the structure due to thermal expansion and contraction, so it is necessary to set a joint at a certain length of the structure to divide the building into several parts. This joint is called temperature joint. For different structural systems, the spacing of expansion joints is different, and the current Code for Design of Concrete Structures (gb500 10—XX-XX) has special provisions on this. Expansion joints can be continuously opened at the foundation; Anti-seismic joint: a joint set to make the building more regular, which is beneficial to the anti-seismic structure and the foundation can be opened continuously.
At present, three joints are mostly used-only settlement joints can meet this requirement, so settlement joints are used instead of other joints.
3. Beam: According to the common support methods of beams, it can be divided into simply supported beams, cantilever beams, simply supported beams at one end and fixed beams at the other end, fixed beams at both ends and continuous beams.
Beams can be divided into main beams, secondary beams, connecting beams, ring beams and lintels according to their positions in the structure.
Doors and windows on the openings of doors and windows support the load from masonry above the openings; Common forms of inter-window wall for load transfer: brick lintel, reinforced brick lintel and reinforced concrete lintel ring beam masonry structure houses, in which closed reinforced concrete beams are set horizontally.
Setting ring beams in masonry buildings can enhance the overall and spatial stiffness of the building and prevent uneven settlement or large vibration load due to the foundation.
Ring beam: a structural closed beam (non-load-bearing beam) in which reinforced concrete is poured at the top or bottom of the masonry to ensure the stability of the masonry. Reinforced concrete is used, the thickness of which is generally the same as that of the wall. It can be slightly less than the thickness of the wall in cold areas, but it should not be less than 2/3 behind the wall, and the height should not be less than 120mm. Common ones are 180mm and 240mm.
In the non-seismic fortification area, the main function of ring beam is to strengthen the overall stiffness of masonry structure building and prevent the uneven settlement of foundation or the influence of large vibration load on the building.
In the earthquake area, the main functions of ring beam are: strengthening the connection of vertical and horizontal walls and improving the integrity of the house; As the edge component of the floor, it improves the horizontal stiffness of the floor; Reduce the free length of the wall and improve the stability of the wall; Restrict the development and extension of oblique cracks in the wall and improve the shear strength of the wall; Reduce the influence of uneven settlement of foundation on houses during earthquake.
Through this internship, I have a further understanding of relevant professional knowledge and learned a lot of things that I have never touched before, which has benefited a lot. The in-depth visit to the front line of the construction site has enabled me to combine the theoretical knowledge I have learned with practice, systematically consolidate the theoretical knowledge I have learned, deepen my understanding of the theoretical knowledge I have learned, get a preliminary understanding of the working characteristics of architectural engineering design and construction, and become familiar with various technologies and management work in the engineering design and construction site. During my internship, I found that my ability to analyze and solve problems was well exercised and cultivated, and I was psychologically prepared for my future work. In addition, through internship, I broadened my horizons and increased my rational understanding of building construction.
Self-appraisal of building engineering 4 I graduated in 20xx, majoring in building engineering technology, covering all aspects of civil engineering such as surveying, drawing, budgeting and construction. After graduation, I have been engaged in the installation and drawing of communication equipment, and now I am looking for a new job. I am a rural person, who can bear hardships, travel and study, and want to find a stable and promising job. I can be responsible for any professional work. I believe where there is a will, there is a way. Maybe I haven't done some work, but I'm willing to try. I hope you give me a chance and I will give you a surprise. Flexible thinking, patient and meticulous, strong adaptability, strong language expression and interpersonal communication skills, practical and realistic about work, strong sense of responsibility, initiative and consideration, cheerful personality, kindness, independence and tenacity, good Mandarin speaking and good physical and psychological quality. On the basis of learning professional knowledge well, I am also very persistent in literature. I won many awards when I was a student.
Only by applying one's intelligence and wisdom to practical work, serving and benefiting the society, and letting benefit and efficiency prove oneself, can one truly reflect one's value! I firmly believe that the road comes out step by step. Only by being down-to-earth and working hard can we achieve better results!
The device must be tried and the prophet's advantage is blunt, the horse must ride, and then know its good intentions. I am convinced that as long as I find a fulcrum, I can pry up the whole earth. Just give me a piece of soil, and I will work with the young cloud of life. You can not only see my success, but also harvest the whole autumn. This is my commitment to confidence and ability.
The sword rings in the middle, and the period is sound. I sincerely hope that I can breathe with you with sincere feelings, * * * fate, development and progress. Please give me a chance, and I will prove myself with my actions.
Self-evaluation of architectural engineering. I graduated from xx Agricultural University majoring in landscape design in June, and began to work in the landscape room of xx Urban and Rural Architectural Design Institute Co., Ltd. in July, 20xx. It's been a year now. In this short period of more than a year, I not only deepened my understanding of the original knowledge, but also got a better understanding of the knowledge that was not touched or deeply touched in previous books. Since work, under the training and teaching of leaders and supervisors, through their own efforts, both study and work have made great progress and great gains. The work is summarized as follows:
In study, since I joined the work, I have been strict with myself, taking my work seriously and trying to improve my ability. At this point, the company gave me good conditions: a large number of practical engineering cases really have a good guiding role for our graduates who just worked; There are also a wealth of books and materials, which can give me a good opportunity to broaden my knowledge and get information and understanding of the development and changes of the industry in time. The design institute also has a positive working environment and a high-quality staff team, which can inspire me to keep learning, surpass myself and improve my self-cultivation.
At work, the first project I participated in was the garden design of Resettlement East and Guidong Gardens. In this project, I am familiar with the basic process of project design, and apply the skills I learned in school, such as Tianzheng Architecture, cad and photoshop, to practical work, and learn a lot of practical experience, and also know how to communicate with Party A and deal with problems encountered in design. Finally, the construction drawings of these two projects were successfully completed and delivered to Party A in June of 20xx and July of xx respectively. During this period, I have been working conscientiously with my colleagues and following the instructions of my supervisor. During the project, I clearly understood the detailed process of the project from scheme-expansion-construction drawing, learned many specifications in design, and strengthened my ability to get along with others and deal with problems in work. Under the guidance of the supervisor and communication with senior employees, my professional knowledge and skills have been greatly improved. Later, he also participated in the landscape design of Li Mao, Bicui Hua Ting, Jinxiu Hua Ting and Beihuan Road. During this period, I paid a lot and gained a lot. After more than a year's work and study, I feel that as an engineering technician, I must be careful, do every step well, be familiar with the design process, drawings and specifications, continue to learn the knowledge related to design and specialty, arm myself with knowledge, learn to communicate with people at work, how to be a man, and establish a correct attitude.
With the development of society, people have higher and higher requirements for design quality. Quality is the solid foundation for the survival and development of enterprises. The improvement of quality depends on the overall quality of employees and the improvement of technical management level. In order to face more fierce competition, it is the focus of the company's work to cultivate high-quality, high-level professional technical and management talents. In the past year's work, with the care of leaders and the support and help of colleagues, through continuous efforts, I have adapted to the pace of work and have certain technical work ability, but there are still some shortcomings. In my future work, I will strengthen my study, overcome my shortcomings and strive to continuously improve my professional and technical level. At the same time, I clearly realize that in order to adapt to the new situation of landscape design, I need to constantly strengthen theoretical study, especially the study of new technologies and theories.
;
- Previous article:Lu Shuyuan’s works
- Next article:What does post-sharpening mean?
- Related articles
- What camera is good for filming micro-movies? If the HD camera
- What photo and retouching software are you using?
- The second identity of a star is surprising. Jason is a teacher and Nini is an athlete. What is Lu Han's status?
- How much is the photo?
- Characteristics of grating in photography
- Outdoor portrait photography skills
- How to take long exposure photos, and what skills are there?
- I know the northern lights are dynamic, but do they move fast? How should I take pictures?
- How can I infer Wang's home address (anti-reconnaissance post)
- How about Pingdingshan Hai Yin Technology Co., Ltd.?