Take photos with Nikon D300S, the photos are very empty and the particles are very heavy.

The existing Nikon CMOS machine has a large contrast, and the skin details in the dark part are a lump of noise when there is no light or uneven light supplement. . This seems difficult to handle. The general standard mode is used for shooting, saturation, contrast and sharpness. If it is post-production, it still needs low contrast, low security and film production, and then post-processing. For contrast, the lack of dark details shows granular noise. The best way is to hit the board or add a flash to make the skin color gray, red and ruddy, transparent and even, and supplement his dark details to make it transparent and clean. There are also underexposed films, and noise particles will appear later. Digital films are all like this (RAW has no processing and no noise reduction. Although JPEG reduces noise, it depends on the performance of noise reduction according to the fuselage, and of course it also loses image quality. It is suggested to go a little too far and just look at the histogram. Of course, it also needs to be based on the effect you want. There is also a virtual problem. After five years of filming, I should know the safety shutter. X 1.5 shutter may be faster at half width. Small steel cannons are really heavy. I took it for a long time, but there will be some paste. Hehe, the landlord can see that the lens or fuselage is out of focus. No, D300S also has fine focus, which can be corrected.