What is the waterproof poster made of?

Question 1: What are the materials of posters and leaflets? Posters are cost-effective, because they need less * * *. Outdoor and indoor inks are different. Materials include PP paper, adhesive P nail, C film, etc. There are many kinds of posters on Taobao, both designed and designed for free.

Question 2: Thin and bright materials, what materials are used to print posters? This kind of printing is not front printing, but back printing, so the surface is very smooth. The other is a little thicker, and then the printed surface is covered with film, and the surface is also very bright.

Question 3: 20 How can posters be moisture-proof and waterproof? I suggest you choose the waterproof products of Oriental Yuhong and the standardized construction team. Oriental Yuhong is the best waterproof listed company in China.

SPU-30 1 one-component polyurethane waterproof coating

"Yuhong" brand SPU-30 1 one-component polyurethane waterproof coating is a one-component moisture-cured waterproof coating, which reacts with moisture in the air after construction to form a flexible, durable and seamless elastic waterproof coating.

Product characteristics

1, single component, ready-to-use on site, convenient construction;

2, high tensile strength, high elongation, good elasticity, good high and low temperature resistance, and strong adaptability to shrinkage, cracking and deformation of the base;

3, the adhesion is strong, and there is no need to brush a base treatment agent on the surfaces of various bases that meet the requirements;

4, the coating is thick, the coating is dense, and there are no pinholes and bubbles;

5, chemical reaction film formation, long-term water erosion resistance, corrosion resistance, mildew resistance, fatigue resistance;

6, good environmental protection performance, high boiling point solvent, no benzene and coal tar components, and no need to add another solvent during construction;

7, cold construction, convenient operation.

application area

Underground works, bathrooms, kitchens, balconies, pools, parking lots and other waterproof works; It is also suitable for non-exposed roof waterproofing projects.

Reference dose

The coating dosage per millimeter of thick film is about 1.6 kg/- 1.8kg/.

Key points of construction

1、

The base should be smooth, firm and dry, free from sharp corners, oil pollution and dust, and waterproof nodes should be handled well.

2, after mixing evenly, with rubber or metal scraper evenly scraping, appropriate points 2~3 times brushing. Bo Tu should be applied for the first time to close the pores at the grass-roots level, and the next step of construction can be carried out only after a layer of coating is finished. Generally, the interval is 24 hours (the drying time is appropriately extended in low temperature environment), and the next brushing direction is perpendicular to the last brushing direction.

3, according to the relevant specifications or design requirements for protective isolation layer construction.

Matters needing attention

1, construction temperature is 5℃ ~ 35℃, and construction is not allowed in rain and snow environment.

2, should be under the condition of good ventilation construction, construction personnel should do the corresponding safety protection measures.

3, direct use, no need to add any diluent, if you need to add, please consult the corresponding technical personnel.

4. Please carry out the construction according to the instructions provided by Oriental Yuhong. For more information, please read the product safety instructions before construction.

Packaging, transportation and storage

1, put in a clean, dry and airtight iron drum.

2. During transportation and storage, avoid sun and rain, stay away from fire sources, prevent collisions and pay attention to ventilation. The optimum storage temperature is 5℃ ~ 25℃, and should not exceed 40℃.

3. Under normal transportation and storage conditions, the shelf life is 6 months.

PBC-328 non-curing rubber asphalt waterproof coating

"Yuhong" brand PBC-328 non-curing rubber asphalt waterproof coating is a waterproof material which is made of high-quality petroleum asphalt, functional polymer modifier and special additives through scientific optimization and mixing, and keeps viscous paste under construction. The product has outstanding creep performance, so it has outstanding application characteristics such as healing, leakage prevention, waterproof ditch, fatigue resistance, aging resistance and stress-free.

Product characteristics

1. Creep-type paste waterproof material made of rubber, asphalt and additives, which is non-curing, film-forming and solvent-free;

2. Good workability: spray scraping construction, one-time molding, no drying time;

3. Excellent grassroots adaptability;

4, the coating is not cured, and the elastic-plastic performance is excellent;

5. Outstanding self-healing ability;

6. Excellent aging resistance, low-temperature flexibility and corrosion resistance;

7, solvent-free, safe and environmentally friendly.

application area

1, which is suitable for the base with large fluctuation and stress and the parts with predictable and frequent deformation; It is especially suitable for projects that cannot be constructed with open flame, machinery or cold bonding.

2. Suitable for waterproof projects such as concrete, color steel roofs, underground, pools and tunnels.

Reference dosage: the theoretical dosage of coating for each layer of construction thickness is: 1.3Kg/~ 1.4Kg/.

PCC-50 1 Cement-based Permeable Crystalline Waterproof Coatings

Yuhong brand PCC-50 1 cement-based permeable crystalline waterproof coating is a powdery rigid waterproof material made of portland cement and quartz sand. And mixed with various active chemicals. Active chemicals penetrate into concrete, producing water-insoluble crystals, blocking capillary holes and making concrete dense, thus achieving the purpose of enhancing impermeability and waterproof protection.

application area

Mixing in the basement ... >>

Question 4: Is the poster made of photographic paper or PP glue? Look where it hangs. Photographic paper is brighter than pp, such as coated paper, which is more durable but thinner than photographic paper.

Question 5: What kinds of materials are used in inkjet printing? Mainly divided into indoor painting (* * *) and outdoor painting. Indoor inkjet printing is generally done with a * * machine, and the picture quality is good, but the ink is mostly water-based ink, which is afraid that ultraviolet rays can only be used indoors. Outdoor spray painting has strong anti-ultraviolet ability, but its fineness is far less than that of indoor spray painting. It is generally used to make large-format publicity billboards, outdoor plaques and so on.

Types of inkjet materials: indoor inkjet materials generally include adhesive-backed PP, high-gloss photographic paper, waterproof cloth, backlight, white canvas, silver carved cloth, canvas, transparent film, etc.

The materials commonly used in outdoor painting are Polaroid cloth (light box cloth), car stickers, net stickers (single penetration) and so on.

Types of spray-painted cloth (light box cloth): According to the different light transmittance and light source position, light box cloth can be divided into three types: back light box cloth, front light box cloth and grid cloth.

Question 6: Is inkjet paper the same as waterproof poster? What is a "couple lock"? Photographic paper is indeed calculated in inches, 1 inch =2.54 cm, then 2.54*36=9 1 cm, that is, the long side of 36 inches is 90 cm. The 40*50cm long side is only 20 inches. You can use photographic paper to develop 50*90 cm posters. Photographic paper is more expensive than inkjet printing because of its good quality and long storage time. Obviously, the merchants exploited the loopholes in the text.

The other 36 inches is 60*90 cm, not 50*90 cm. The size of 36 inches is fixed, and it will not become smaller because of different materials.

Couples can't lock clearly.

Question 7: I want to make a poster with my own picture. Where can I do it? What is the price? It's just that the surface of the poster looks like something waterproof. You didn't go to the store advertising on the street, did you?

Question 8: What materials are commonly used in inkjet printing? Generally speaking, this is more like acrylic acid. Need to be specific.

Question 9: What is the material of printing glue? The surface is paper and the back is glue. After a long time, the glue dries. It usually sticks to paper, wood, iron or glass for a long time. It is definitely not possible to change the wallpaper. It fell off in one summer.

Question 10: Some common materials for inkjet printing! Glue-backed PP cold-mounted film light box photo paper PVC film banner cloth waterproof * * * cloth gold and silver film sandwiched with black cloth waterproof PP synthesis ... waterproof PP glue color jet film color jet rice paper PET crystal phase ... mercerized silk PVC calendered film art cloth RC high gloss paper transparent film transparent glue water-based transparent PV ... white bright PVC floor film thermal transfer paper introduces common inkjet materials.

There are only two uses of inkjet works, one is outdoor advertising, and the other is the production and output of indoor advertising pictures. At present, the price of finished inkjet products is generally calculated by the output area, that is, the actual number of square meters multiplied by the price per square meter, and the design fee is generally charged according to the difficulty. The following is a list of two general materials: 1. Indoor spray-painted advertising materials 1. Car body sticker: This kind of spray-painted sticker has good adhesion and sun resistance, and is generally used for spray-painted stickers on car bodies.

2. Outdoor silk cloth: used for more romantic and elegant display occasions.

3. Outdoor outdoor light cloth: We saw a large outdoor ink painting, which belongs to the light shooting from the outside to the cloth.

4. Outdoor and indoor lighting cloth: We saw the spray painting on the outdoor signboard, which belongs to the cloth sprayed by the light in the light box.

5. Single-hole penetration: the material stuck on the car body glass, used together with the car body sticker.

6. Grid cloth: mesh spray paint material, which is used for the special expression of guests to reflect the style. Note: It is best to store inkjet images in TIF format, but JPEG format can be stored for convenience of transmission. Documents in Coreldraw, Freehand and Illustrator formats must be converted into curves. Second, indoor inkjet advertising materials

1. Silk cloth: spray-painted material similar to silk, used in more romantic and elegant exhibition occasions, such as clothing stores.

2. Canvas: used for more romantic and elegant exhibition venues, with a certain oil painting texture, which can be used for wedding photography.

3.PP film: that is, we commonly call it a poster. It's exquisite and accurate, but it doesn't have its own rubber surface on the back. Customers can stick it on the wall with double-sided tape, which can be used many times.

4. Transparent tape: another kind of tape, but this kind is transparent and is mostly used for posting at the door. This kind of material is noble and generous, which is the choice to show the company's image.

5. Photographic paper: also known as poster, it is a kind of exquisite photographic paper with high precision and no self-adhesive surface, and is often used to make Yi Labao, X booth and other booths.

6. Light box piece: the exquisite painting in front of the light box is different from the painting on the signboard we usually see, but is used for the painting on the menu light box of McDonald's, which has the characteristics of exquisite image and moderate light transmittance.

7. Glue-backed ordinary board: glue is pasted on a special KT board similar to foam board, and then edges are added around it to form a picture frame. This material is light and can be used for company decoration and exhibition.

8. Adhesive-backed high-quality board: The difference from ordinary board is that there will be no bubbles on the board after long-term use.

9. Adhesive-backed PP paper: The difference from PP film is that it has its own adhesive surface, and customers tear off the adhesive film and stick it on the wall.

For indoor use, the output picture is generally only a few square meters in size. Limit the maximum width at one end to1.5m. After the output image is completed, it is necessary to cover the film (guests can choose light film or sub-film) or board to be the finished product, with high output resolution and clear color saturation. Outdoor accuracy will be relatively small, the size is not limited, and no film is needed. What problems should be paid attention to in outdoor inkjet advertising consumables

Ink-jet advertisements are often used outdoors. In the process of inkjet production, we must consider the outdoor environment and adopt the most suitable inkjet materials and technologies. Our Beijing inkjet printing company will popularize relevant knowledge for everyone. 1 The outdoor spraying advertisement takes a long time, and the surface protective film may appear bubbles, wrinkles or peeling. In this case, attention should be paid not only to outdoor painting, but also to indoor painting, such as Yi Labao and X-frame, which need to be reused. This is mainly caused by two reasons. First, the pressure in the process of laminating is not enough, which leads to the poor combination of protective film and inkjet paper, leading to the entry of air or water vapor. The other is the quality of the protective film, such as the toughness and thickness of the protective film, and whether to use fast glue or continuous glue for gluing. At present, the quality of protective films on the market is different. It is best to cooperate with trusted merchants to avoid many after-sales problems.

2. In order to avoid warping >>