Traditional Culture Encyclopedia - Photography and portraiture - How to change the ip of Hikvision hard disk video recorder and video camera
How to change the ip of Hikvision hard disk video recorder and video camera
How to change the ip of Hikvision hard disk video recorder and video camera
1. First, turn on the computer, and click Hikvision hard disk video recorder configuration in the computer to enter the configuration page. Then select the option Network-Basic Configuration-TCP/IP on the pop-up page, and you can set the IP, mask and gateway of the video recorder on this page.
2. Turn on the computer and search for "Hikvision" in the browser. Enter Hikvision page, select "Service Support" and click "Tools and Software". After entering the "Tools Software" page, select "Hivkisiontools" (including tools such as SADP and video capacity calculation).
3. Haikang defaults to 190.0.64, changes it to 190.0.xx after connecting a computer, then enters ie and enters 190.0.64 to change the ip. The default port is 8000 Super User Administrator Super Password 123456.
4. To change the IP of the video recorder, you need to open the video recorder and modify it in the main menu and network settings. Modify the camera IP, connect the camera power supply, connect the computer and the camera with a network cable, and enter the default IP of the camera to modify.
5. The IP main menu of the camera-channel configuration-first click the searched camera (one-button activation, using the password of the device manager)-then click one-button add-so that the IP can be automatically modified and added-and you can see the image.
How to set the ip address of Hikvision camera
How to set the ip address of Hikvision camera
1. Put the mouse on the video recorder login interface and right-click the main menu option. After the following interface pops up, click the channel management camera to start, connect the router (switch) and the camera with a network cable, and then select Custom Add (remember to select this option).
2. Operating steps: Connect the computer and camera, and turn on the SADP. You will find that Haikang devices are directly connected to the same switch. Select IPC, modify the IP on the right, enter the password, and click Save to complete the task of modifying the IP.
3. Haikang defaults to 190.0.64, changes it to 190.0.xx after connecting a computer, then enters ie and enters 190.0.64 to change the ip. The default port is 8000 Super User Administrator Super Password 123456.
4. Video recorder screen: 2. Right-click anywhere on the screen to pop up a menu bar: 3. Select the main menu and you will be prompted to enter your password. Now Haikang's login password is usually set by himself: 4. Enter the password and enter the main menu, as shown in Figure 5. Select-System Configuration Menu: 6. Select-Network Configuration.
The phone has been changed to Hikvision camera ip.
The phone has been changed to Hikvision camera ip.
First, you need to log in to the surveillance camera software in your mobile phone. Secondly, look for ore after entering, and then find modification. Finally, click the IP address to modify it.
IP of camera: main menu, channel configuration, search camera, first activate with one button, use device manager password, and then add with one button. This is automatically adding IP.
Operating Steps: Connect the computer and camera, and turn on the SADP. You will find the same switch/directly connected Haikang equipment. Select IPC, modify the IP on the right, enter the password, and click Save to complete the task of modifying the IP.
Hikon video recorder ip is different from camera ip.
Hikon video recorder ip is different from camera ip.
Modify the IP address of the video recorder and the IP address of the camera to the same network segment.
Change the IP of the video recorder: main menu, system configuration, network configuration, basic settings, change IP. IP of camera: main menu, channel configuration, search camera, first activate with one button, use device manager password, and then add with one button. This is automatically adding IP.
System settings. In Hikvision cameras, the default ip address itself is different, which is the system setting, so the IP gateway of Hikvision cameras is different.
Hikvision 4200 client and camera are not on the same IP. Browsing depends on the network structure. From the point of LAN connection, if they are wired, the computer and camera of the 4200 client are in the same LAN, and the network configuration is correct, so you can browse.
The default camera ip of Hikon hard disk video recorder needs to be modified.
- Related articles
- How to choose Epson a3 inkjet printer? Epson a3 inkjet printer model recommendation.
- Details of Guangzhou Uprising Martyrs Cemetery
- How does the witch of Zero Ya Ru break free from the ghost hand?
- What is mp media platform?
- What scenic spots in Dali Scenic Area are worth recommending?
- Positive energy sentences of entrepreneurial copywriting
- Where does Dream of Red Mansions tour?
- Photography job benefits for photographers
- Send a circle of friends to the painting class?
- What does breast mmt mean?