Traditional Culture Encyclopedia - Photography and portraiture - How to make rust in PS How to make rust texture in PS

How to make rust in PS How to make rust texture in PS

How to make a rusty rendering in ps 1. First, start Photoshop cs5, execute the File-New command, and create a new document with a size of 800*800, a resolution of 300, and a white background color.

2. Execute altdelete to fill the foreground color with black, execute the filter-render-cloud command, and press ctrlf to adjust the cloud effect.

3. Execute the filter-rendering-layer cloud command, then ctrlf, and execute the adjustment effect three times in a row.

4. Execute the command Filter-Render-lightingeffects. In the pop-up dialog box, set the light source type to full light source, the intensity color to orange, enlarge the light source, and click the OK button.

5. Execute the Filter-Artistic Effect-Plastic command, and set the highlight intensity to 20, detail to 15, and smoothness to 15 in the pop-up dialog box. Click the OK button.

6. Execute the Filter-Twist-Ripple command, set the value to 999 in the pop-up dialog box, the size to medium, and click the OK button.

7. Execute the Filter-Distort-Glass command, and set the distortion to 20 and the smoothness to 7 in the pop-up dialog box. Texture matte, scaled 80%. Click the OK button.

8. Execute the command Filter-Rendering-Lighting Effects, set the light source type to full light source in the pop-up dialog box, modify the color, set the texture channel to red, and click OK.

9. Execute the command Image-Adjustment-Hue Saturation, set the hue to -4 in the pop-up dialog box, and leave other parameters unchanged. Click OK.

10. In this way, the rusty effect is completed. Execute the file - save as command, enter the name in the pop-up dialog box, and save it in the appropriate location.

How to adjust the material rust in Maya?

Create a small rusty iron box. Create a box. Select all sides and perform BEVELBEVEL. Then the POLY will be chamfered. Then find the material and PS it to black and white. Then adjust the contrast. The black and white will be used as a mask, and then Select POLYGON in a new drawing, and then execute the polygon before giving the coordinates and give the polygon after the coordinates. Try to select the necessary adjacent edges

How to clean the things on the copper coins?

Steps to clean copper coins:

1. Soak in boiling water for 10 minutes;

2. Wipe gently with a brush (soft toothbrush/eraser).

ps: Generally, 10% glacial acetic acid is used to remove rust, soak it for about an hour, and then use a brush. You can also use vinegar or MSG water. Never soak it overnight, otherwise the color of the money will be dull. As ugly as fake money. Some small tools will do, such as brushes, tweezers, and knives.

It is better to clean it with alkaline liquid. There are also special cleaning agents. It is best not to wash it and keep it in its original state. Washing it will damage its historical value. Put it in a relatively dry place and use lime. Wrap it, or put desiccant around it.

How to refine pictures (middle), high-quality picture processing techniques?

Tools: ps

1. Optimize lighting. If the photos are taken by professional photographers in the studio, then the lighting problem is generally not too big, but many people lack funds. Small brands can only shoot by themselves. Due to the lack of lighting equipment, it is easy to cause problems such as too dark, too bright, too scattered, and insufficient light sources. These problems need to be solved by designers in post-production.

2. To address the problem of overall dark light, we can use the color scale tool to increase the brightness of the bright surface of the perfume bottle. In order to emphasize its reflective texture, we also need to separately brighten the highlight area. For the problem that the bottom of the bottle is too dark, there is also a very useful method, which is to use the Image-Adjustment-Shadow/Highlight tool in the PS menu bar.

3. The effect after optimizing the lighting is roughly as follows. Although the picture still has many shortcomings, the lighting has been improved a lot.

4. Optimize the clarity. Insufficient clarity is generally caused by the camera configuration not being high enough or not focusing properly. Pictures with insufficient clarity feel like they are covered with a thin layer of fog. Generally, it will reduce the quality of the product. So how to optimize the clarity of pictures? One is structure and the other is texture. For example, in the diamond ring pictured below, although the general structure is fairly clear, the structure in some details is unclear.

5. If you want to re-draw the structure more clearly, you need to spend some patience. The usual method is to check out each of its faces (as shown below), and then adjust the light and shade on them individually. , only by strengthening the contrast between surfaces can the structure become clear.

6. But for situations like the picture below where the texture cannot be seen clearly, this method does not work. The best way is to re-make the texture or find a texture material online. For example, there are a lot of diamond materials on the Internet, so I looked for a diamond picture with a similar angle. As for the texture of the gray block, it is actually similar to a brushed stainless steel pattern with a little variegation. I just made it myself.

How to match the drawings for cross-stitch embroidered cloth?

You can make cross-stitch drawings by yourself using PS technology. Of course, the premise is that you must find the exact same picture online.

Production steps:

1. Create a new transparent layer. There is no need to teach you this. Set the size to 5x5 pixels.

2. After enlarging the file to 3200 times, which is the maximum multiple, use the pencil tool to trace grids of different shades.

3. Under the menu editing bar, select the custom image, then confirm, and the pattern will be generated.

4. Open the picture and crop it. This step is very important. The same content of the pictures does not mean the same proportions. If they are not cropped, they will be useless.

5. Execute the menu filter bar, first select pixelate, and then select mosaic. Write 5 as the number of grids.

6. Duplicate the layer, then create a third layer between the two layers and fill it with the pattern from step 3.

7. Change the middle layer to Linear Burn, and change the first layer to Soft Light.

8. Brighten the picture, merge the layers, then copy the new layer and change the mode to Screen. Finally, beautify it and merge the layers again.

9. Such a cross-stitch drawing is successfully produced.