How to disassemble the camera after Tiggo 8?

The camera behind the Tiggo 8 can be removed with screws. If it is not a professional's suggestion, please have it disassembled by a professional to avoid damaging the vehicle. The interior rearview mirror is a mirror that can confirm the rear scene without changing the front view too much during driving. The driving recorder with double recording before and after can fully guarantee driving safety. The rear camera of the driving recorder has two installation positions, one is installed on the lampshade of the license plate, and the other is installed on the rear glass in the car.

Dismantling method of reversing camera

Open the trunk door, unscrew the screws on the trunk, and remove the partition on the trunk lid. After disassembling, you can see the exposed trunk and find the buckle of the outer panel of the trunk. Squeeze the white rivet on the left side, unscrew the fixing screw of the trunk outer panel on the right side, and push the buckle of the mounting hole of the left reversing camera outward. There is also a pair of screws on the left side of the right door lock module. Unscrew the nuts in the same way.

By the way, unscrew the trunk lock, so that the trunk trim panel can be completely removed. Take out the old camera to be replaced, then insert a new reversing camera, and restore and dock the video cable interface of the original car according to the original wiring position. Outside rearview mirrors are used for passenger cars. Generally, the exterior rearview mirror is installed on the door, and Japanese-made cars are also installed on the fender.