Excuse me, do you have a sample tender document?

Article title: Construction and installation project bidding document

In order to increase the construction speed of the construction and installation project and improve economic benefits, with the approval of ________ (construction authority), ______ (construction unit) Bidding is conducted for all projects (or unit projects, professional projects) of ______ construction and installation projects (public bidding is carried out by the construction unit publishing bidding advertisements in regional or national newspapers, and invitation bidding is carried out by the construction unit to those who have the ability to undertake the project. Several construction units issue bidding documents, and the designated bidding department shall request the competent department of construction projects or the competent department of capital construction to issue injunctive bidding documents to several construction companies in the region).

1. Preparatory conditions for the bidding project

The following bidding conditions for this project have been met:

1. This project has been listed in the national (or ministry, commission) , or province, city, autonomous region) annual plan;

2. There are construction drawings and budget estimates issued by the design unit approved by the state;

3. The land for construction has been acquired, and there are obstacles All properties have been demolished; the water, electricity, road and communication conditions for on-site construction have been implemented;

4. Funds, materials, equipment distribution plans and collaborative supporting conditions have been implemented respectively, ensuring supply, so that the proposed construction The project can be constructed continuously within the scheduled construction period;

5. A construction permit has been issued by the local construction authority;

6. The lowest bid for this project has been reported to the construction supervisor Review by the department and China Construction Bank.

2. Project content, scope, project quantity, construction period, geological survey unit and engineering design unit:

________________________________________________________________________ ____________.

2. The site, water, electricity, roads, etc. available for the project:

________________________________________________________________________ ___________.

3. The quality level of the project, technical requirements, Special requirements for project materials and bidding units, project acceptance standards:

___________________________________________________________________________________.

Four. Project supply methods and main material prices, project price settlement method:

______________________________________________________________________ ____________.

5. Organize the bidding units to conduct on-site inspection of the project, and explain the time and place for submission of bidding documents:

______________________________________________________________________ _____________.

6. Registration, bidding date, bidding document delivery method:

Registration date: ____month____, 19th year;

Bidding period: 19th From ____ month ____, ______ year, to ____ month ____, ______ year 19.

Method of sending bidding documents:

____________________________________________________________.

7. Time and method of bid opening and evaluation, basis for winning the bid and notification:

Bid opening time: ____ month ____, ______, 19 (the bidding documents are issued to the bid opening date, generally not more than two months).

Bid evaluation end time: ____ month ____, 19______ (from the date of bid opening to the end of bid evaluation, generally it shall not exceed one month).

Bid opening and bid evaluation methods: The construction unit invites the construction authority, the Construction Bank and the notary office (or the industrial and commercial administrative department) to participate in the public bid opening, review the certificates, and adopt a collective evaluation method to evaluate and determine the bid. ).

Bid-winning basis and notice: The basis for the evaluation of the winning bidder for this project is excellent project quality, appropriate construction period, reasonable bid, and good social reputation. The bidder with the lowest bid may not necessarily win the bid. When the bid prices of all bidding companies are higher than the minimum bid, if the minimum bid is calculated incorrectly, it should be adjusted according to the actual situation; if the minimum bid is correct, the unreasonable parts will be eliminated through bid evaluation to determine the reasonable bid and the winning bidder. Within five days after the evaluation, the bidding unit will send the bid winning notice to the winning bidder by mail (or delivered by hand), and sign a ______ construction contract with the winning bidder within one month (no more than two months). Installation project contract.

Eight, others:

________________________________________________________________________ ___________.

The tenderer promises that once this tender document is issued, it shall not change the contents of the original tender document. Otherwise, it will compensate for the losses caused to the bidding unit. The bidding unit shall participate in the bidding preparation and bidding at its own expense in accordance with the requirements of the bidding documents. The bid document (i.e., the bid letter) shall be filled out in the prescribed format, the handwriting must be clear, and the seal of the unit and representative must be stamped. Tenders must be sealed and cannot be delivered after the deadline. Once a tender is issued, it cannot be withdrawn or changed for any reason.

If a dispute occurs during the bidding process and the two parties fail to reach an agreement through negotiation, the department responsible for the bidding management will mediate and arbitrate. If you are not satisfied with the arbitration, you can appeal to the court.

Construction unit (i.e. bidding unit): _______________

Address: _______________________________

Contact person: ____________________

Telephone: ____________________

____month_____, ______, 19

"Tender Book for Construction and Installation Projects" comes from the Big Secretary Network. This site provides free article search help to all official members. Welcome to the tender document for construction and installation projects.

Article title: Hospital medical equipment bidding document sample

Project name: Campus hospital equipment

Name: X-ray, blood cell counter, fully automatic biochemical analyzer

Project number: 2007-wzgyk-02

List of bidding documents

1. "General Rules for Bidding for the Purchase of Instruments and Equipment at Shandong ** University", the main contents include:

Principles and precautions that should be observed during the bidding process.

2. Bidding technical documents, including quantity and requirements.

Shandong ** University Experimental and State-owned Assets Management Department

2007-01-05

Shandong ** University General Tendering Rules

Project number: 2007-wzgyk-02

Shandong ** University (tenderer) conducts limited competitive bidding for hospital equipment from related professional companies. Companies participating in the bidding are requested to read these general provisions carefully and provide relevant information as required.

1. Project Overview

(1), Project Name: School Hospital Project

(2), Project Location: Shandong ** University

(3). Project content: X-ray, fully automatic biochemical analyzer, blood cell counter

2. Contents of bidding documents

(1) Please introduce your company's Basic information and provide credit certificate

A. Copy of the company's business license, organization code certificate, tax registration certificate: If it is a branch, agent or office, an authorization from the head office or headquarters must be attached. power of attorney.

B. Company strength, reputation, and example projects in China that can illustrate your company (preferably projects from Zibo area or domestic universities), including the name of the user unit, project name, name of the person in charge, and contact number etc.

C. The above information must be bound into a book as an attachment to the tender document and a table of contents should be attached to the homepage.

(1) The bidder shall, on the basis of these general principles, make a detailed overall response to the various requirements in the attachment (including the unit price and total quotation of the system solution and its corresponding specific equipment) , and guarantee that there will be spot supply during the execution period of winning the bid for this project.

(2) The bidder shall not make any changes to the contents of the bid schedule issued by the tenderer. If the bidder has other better constructive opinions or plans regarding the content, it can make another plan and quote, and please indicate the characteristics of the proposed plan for the tenderer's reference. However, an oral declaration must be made to the tenderer before the bid is opened and written information must be submitted at the same time. When experts evaluate the bid, the proposed plan will be treated equally with the original bid plan.

(3) After-sales service commitment (including product warranty period, service response time and guarantee measures, contact person, contact number, etc.).

(4) The bidder must complete the relevant bidding documents according to the requirements in the attachment to the bidding letter.

(5). The bidder must prepare 1 "original" and 3 "copies" of the bidding document, and clearly mark the "original" and "copies" of the bidding document. If there is any discrepancy between the original and the copy of the bidding document, the original shall prevail. The original and copies of the bidding documents should be printed on GB/T148-A4 paper. Charts and charts can be expanded in multiples of the same specifications. Handwriting and random modifications are not allowed unless these deletions are made in accordance with the instructions of the bidding unit. If the error must be corrected by the bidding unit, the correction shall be affixed by the bidder with the official seal of the legal entity and the seal of the legal representative or authorized representative.

Tender documents must be submitted in 4 copies (packed in an envelope). Each page of the attached form must be stamped with the official seal of the bidding unit, sealed as a whole, and submitted with a seam seal.

If the bidding documents are not sealed and stamped with the official seal and seal according to the above provisions, the tenderer will not be responsible for the misplacement or early opening of the bidding documents, and the bidding documents opened in advance will be rejected.

(6) If the bidder has any questions that need clarification or modification after receiving the bidding documents, he shall submit them in writing to the tenderer at least 2 days before the deadline for submission of bid documents required by the bidding documents. The tenderer will respond in writing if it deems it necessary to clarify. This reply will be sent to all bidders and will be included in the bidding documents. As an integral part of the bidding documents, the supplementary notice has the same binding effect on the bidders. The bidders should take the content of the supplementary notice into consideration when preparing the bid documents.

3. Schedule:

Tender documents will be issued on January 5, 2007. For bid documents, please see the website: Tender Information of the Experimental and State-owned Assets Management Office.

Go to the Bidding Office to pay the bid fee and bid deposit before 8:30 am on January 12, 2007. The bid will be opened at 9:00 am in Room 414, Hongyuan Building, Shandong ** University.

Participating bidders are requested to send representatives to attend on time. Each bidding unit is limited to 3 representatives. The legal representative or authorized representative of the legal person must attend, otherwise the bid of the bidding unit will be deemed invalid. mark. During the bid opening, each bidder is allowed five to ten minutes to make oral supplementary statements (which may also be waived). The tenderer shall open bids at the time and place specified in the bidding documents.

4. Relevant fees (only for this project)

Units participating in the bidding need to pay a bidding fee of 100 yuan (non-refundable) and a bidding deposit of 10,000 yuan (the deposit will be refunded to the unit that does not win the bid. The unit will be converted into a contract deposit, which will be refunded after the equipment is inspected and accepted).

The winning bidder shall pay a bidding service fee of 0.8% of the total contract amount when the contract is signed.

5. Delivery requirements and payment methods

(1) Delivery time: Arrival before March 10, 2007 or negotiated according to the supplier’s specific conditions.

(2). Transportation method: the bidder is responsible.

(3). The payment method for this project is installment payment. 90% of the total contract price will be paid after passing the acceptance, and the balance will be paid in three months.

6. Terms of invalidation of tender documents:

(1) If the tender documents are not formally purchased;

(2) During the bidding and bid evaluation period, the bidder There are attempts to influence the bidding results and other unfair competition behaviors;

(3) Tender documents that are not produced in accordance with the general principles and the content requirements of the tender document;

(4) Any modifications to the content of the tender documents Unauthorized changes without the consent of the bidding party;

(5) Failure to submit the bid within the prescribed deadline for submission of bids;

(6) The number of participating bidders is not sufficient to produce Effective competition;

(7) The bidder provides false certification materials to the tenderer during the bidding process (including credit certificate, performance, product performance, production plant, etc.).

7. Bid evaluation principles:

(1) The bidding party promises that the bid evaluation work will be carried out by the bid evaluation committee organized by relevant bid evaluation experts in accordance with the law, in the spirit of "openness" Strict bid evaluation will be carried out based on the comprehensive bid evaluation principles of "fair, impartial, scientific and merit-based" to fully guarantee the legitimate interests of each bidder.

(2) The bid evaluation shall be based on the principle of combining standardization and flexibility, and comprehensively consider the bidder's bidding plan, quality, service commitment, the company's technical strength, social response and other factors. A comprehensive evaluation of the prerequisites will be conducted, and the winning bidder will be initially determined. After consultation and no objections are raised, the bid will be submitted to the bidding leading group for approval and announced.

Whether the bid quotation adopts a second quotation shall be determined by the bid evaluation team based on the first quotation.

(3). After the bid evaluation results come out, the tenderer will issue a "Notice of Winning Bid" to the winning bidder within 5 working days, and formally notify all bidders of the winning bid results.

(4) After the tendering party formally notifies the winning bidder, both parties shall, within 5 working days, negotiate with the bidding unit and the winning bidder at the specified time and place in accordance with the "Contract Law of the People's Republic of China and the People's Republic of China" and its relevant provisions, and based on the relevant contents in this bidding document and its attachments, the contract is formally signed. In principle, the contract shall be subject to the standard contract provided by the tenderer.

8. Other instructions:

(1) Bidders are requested to carefully review the requirements in the bidding documents and fill in the bidding price and commitment carefully. If the bid documents prepared by the bidder cannot respond to and meet the requirements of this bidding document, the bidder shall bear the responsibility and its bid documents will be rejected by the tenderee or deemed to be invalid bids.

(2) All bidders please read this bid document and attachments carefully. They contain most of the terms that will be written into the contract. Once the bidder formally bids, it will be deemed to have been submitted to the tenderer. Relevant commitments with legal effect have been made and shall not be changed at will except for force majeure factors.

(3) For manufacturers that bid maliciously and do not guarantee supply according to the contract requirements after winning the bid, the tenderer reserves the right to notify criticism, claim compensation, fines, charge liquidated damages, and stop the supply of all products. Behavior.

(4) Regardless of the bidding result, the bidder's bidding documents will not be returned, and no explanation will be given to the unsuccessful bidder.

All expenses incurred by the bidder during the bidding process shall be borne by the bidder regardless of the bidding result.

(5) The quotation includes transportation and miscellaneous charges, loading and unloading charges, etc.

Contact number:

Address:

Experimental and State-owned Assets Management Office

Tendering Office ()

Account opening unit: Shandong ** University Account opening bank:

Account number:

Tendering unit (official seal)

2007-01-05

1 fully automatic biochemical analyzer

1. Test speed: 300-400 tests/hour.

2. Independent sample needles, reagent needles, and stirring needles. The sample needles and reagent needles have automatic inner and outer wall flushing, liquid level sensing, and automatic safety and anti-collision functions.

3. 60 sample positions, test tubes of various specifications can be used, and the original test tubes can be loaded directly into the machine. The reagent tray is refrigerated 24 hours a day to reduce the use of reagents.

4. All reagents are open.

5. Optimized cross-infection prevention procedures to reduce cross-contamination.

6. Free service for 2 years.

1 blood cell counter

Classification one and three ≥ 18 parameters,

two needles and two channels

three , two modes of peripheral blood and venous blood

4. Power system: silent peristaltic pump, no noise and no interference.

5. Automatic blockage removal, automatic filling and cleaning.

6. Quality control methods: X-R XB XD-CV.

7. Free service for two years.

1 X-ray fluoroscopy machine

1. Line high voltage generating device: program-controlled 500A host computer.

2. Remote diagnostic bed: ZC15XY-1

3. Integrated camera: SC4-4

4. Image intensifier: 9-inch image intensifier .

5. TV monitor: Built-in 14-inch TV monitor.

6. Rotatable foot pedal.

7. Line pipe components.

8. Line high-voltage cables.

"Hospital Medical Equipment Tender Letter Sample" comes from the Big Secretary Network. This site provides free article search help to all official members. Welcome to read the sample tender document for hospital medical equipment.

Article Title: Bus Station Design Tender Document

1. Project Overview

1. Project Name: County Bus Station

2 , Construction unit: Branch of Municipal Automobile Transportation Co., Ltd.

3. Project location: The southwest corner of the intersection of the lines is at the cut of the highway.

2. Natural conditions

l. Extreme maximum temperature

2. Extreme minimum temperature

3. Annual average temperature

4. Annual precipitation

5. Maximum wind power over the years

6. Maximum wind speed over the years

7. Fog

3. Design requirements

1. Based on the "Approval of the Feasibility Study Report on the County East Bus Station" issued by the Municipal Development and Reform Commission.

2. Comply with the "Bus Passenger Station Classification and Construction Requirements" (JT/T200-2004) of the Ministry of Transportation and the "Bus Passenger Station Construction and Design Specifications" (JGJ60-99) of the Ministry of Construction and the Ministry of Transportation.

3. It basically complies with the County Planning Office’s “Planning and Design Conditions for the Construction Land of County East Bus Station”.

4. The design should be economical, practical and beautiful. To reflect people-oriented and passenger convenience, the main economic and technical indicators should be clearly stated, such as: land acquisition area, actual use area of ??the station, parking area, main station building area (waiting room, ticket hall and layered area) and auxiliary facilities construction area, etc. .

IV. Explanation of Bidding Requirements

1. Bidding units must have independent legal person qualifications and architectural design Grade B (including Grade B) or above qualifications.

2. Invite design units to participate in the scheme design. Design units that voluntarily accept the invitation must pay a deposit of 5,000 yuan and go to the site for inspection within the specified time.

3. The winning unit in this scheme design bidding is the preliminary design and construction drawing design unit.

4. The design plan will be invalid if one of the following circumstances occurs:

(1) Failure to respond to the design bidding document;

(2) Failure to comply with regulations Time to visit the site;

(3) The design plan is delivered late;

(4) The design plan does not meet the requirements of the "** Provincial Construction Project Design Tender Document Preparation Depth Regulations"

(5) The scheme design shall generally not exceed ±5% of the indicators stipulated in the feasibility study report. Special circumstances may be explained, and there is no restriction on the increase in parking area.

5. There are seven design documents submitted by the design unit, one of which is the original, including relevant qualification certificates and business license (copy) for reference.

The original document should be stamped with the official seal of the design unit, signed and sealed by the legal or authorized person, a registered practitioner with corresponding qualifications, and the person in charge of the specific establishment. It should be sealed separately and the words "original document" should be marked on the seal. The remaining documents should be Copies shall be used for bid evaluation. Copy documents and other materials shall not contain any words or marks that indicate or imply the design unit.

The design unit shall deliver the above-mentioned copies of the documents and the sealed original documents to the designated location within the specified time.

6. Tender submission location:

Contact person: Contact number:

7. On-site inspection time: Noon of year, month and day

Deadline for delivery of the design plan: Noon of the year, month, day

5. Commitment of the design unit

While stipulating the design plan, the design unit must submit a relevant letter of commitment to the construction unit.

1. Commitment to design progress, depth, design quality, and quality service:

2. Time required for preliminary design and construction drawing design:

3. The design fee quotation is for all construction projects that can be approved, and includes the total cost of schematic design, preliminary design and construction drawing design. The total cost must be calculated in accordance with national standards, and a preferential rate shall be proposed based on the design fee quotation, calculated Provide an actual quotation and explain the relevant additional conditions.

6. Bid evaluation method

It shall be implemented in accordance with the "Detailed Bid Evaluation Rules for the Design of County Bus East Station".

7. Documents and information to be provided by both parties:

l. Invite the unit to provide basic design information

(1) Project feasibility study approved by the Provincial Department of Transportation Report:

(2) Planning and design conditions provided by the county planning office:

(3) Design proposal invitation letter.

2. The selected design unit must provide the following documents:

(1) Provide a complete set of design plan drawings that can be approved by the company in accordance with the depth required by the design specifications, including general floor plan, transportation Road network planning, environmental layout, main station building renderings.

(2) Plan design instructions and economic and technical analysis data, and the engineer can approve the design drawings and descriptions of each project.

3. The specifications of the scheme design drawings and instruction manuals are A3, ***7 sets (including one set of original documents) and the main station room color inkjet drawings are Al, ***1 set, and additional General floor plan, one floor plan for the main station building, and the drawings are Al.

4. The bid price for design fees must be submitted using the double-envelope method. One envelope contains the unsigned envelope and is packaged in a duplicate document, and the other envelope is signed and stamped and packaged in the original document.

8. Main conditions and requirements for signing a planning and design contract

l. After the plan is reviewed and selected, the construction unit and the applicant unit sign a design contract. The design fee is based on the current national Standard discounts are given.

2. There will be no additional charge for the design plan of the selected unit. The unsuccessful unit will pay a cost of RMB ___ yuan for its candidate plan and the deposit will be refunded. The intellectual property rights of the unsuccessful unit's design plan will belong to the construction unit. Units whose design plans are judged to be invalid by experts will not pay the cost of construction and will not refund their deposits.

9. Contact person and phone number of the construction unit

Contact person: Contact number:

Attachment:

1. Municipal Development and Reform Commission No. "Reply on the Feasibility Study Report of the County East Bus Station"

2. County Planning Office "Planning and Design Conditions for the Construction Land of the County East Bus Station"

3. County Automobile Map of the East Railway Station

Details of the County East Railway Station project (work permit)

Project name Quantity Investment (10,000 yuan) Description

1. Housing construction project 16,000m2 800

1. Station service room 2863 m2 143

Among them: waiting room 1200 m2

2. Administrative room 540 m2 30

3. Production auxiliary facilities 12337 m2 622

Among them: vehicle maintenance workshop 300 m2

Auxiliary workshop 200 m2

Material room 200 m2

Car washing station 100 m2

Vehicle safety inspection station 100 m2

Power distribution room 30 m2

Boiler room 100 m2

The guard communication room is 60 m2

Other auxiliary facilities are 1,300 m2

The dormitory building is 9,947 m2

4, and the service facilities are 260 m2 5

Among them : Motorcycle shed 200 m2

Infirmary 60 m2

II. General plan project 234

1. Site filling and leveling 52000m3 98 Leveling the ground

2. Station square 1500 m2 54 stone cushions

3. Parking lot 23874 m2

4. Indoor water, electricity and fire protection 50

5 , Greening 10

6. Wall gate 1200m 22

3. Equipment security inspection, power transformation and distribution equipment, etc.

4. Others 684

1. Land acquisition 37227 m2 670

2. Application for construction, design, supervision, etc. 14

Total 16000 m2 1718

Bid evaluation rules for bus station design< /p>

(Trial)

According to the "Tendering and Bidding Law of the People's Republic of China", the "Tender Evaluation Committee and Tender Evaluation Methods" of seven ministries and commissions including the National Development Planning Commission, "* ＊Provincial Transportation Construction Project Tendering and Tendering Management Regulations", "**Provincial Construction Engineering Design Tendering and Tendering Management Implementation Rules" and other relevant regulations, combined with the requirements of the bidding documents of this project, formulated the "County Bus East Station Design Tendering and Bidding Evaluation Rules".

Article 1. Bid evaluation projects shall follow the principles of openness, fairness and impartiality. No unit or individual may illegally interfere with or influence the bid evaluation process and results.

Article 2 The bid evaluation work for this bidding project is based on the bid evaluation methods stipulated in the bidding documents, using a comprehensive evaluation method to comprehensively review and compare the bid documents of all bidders, and propose winning bids or rejected bids. or re-tendering and other bid evaluation opinions.

Article 3 The bid opening shall be hosted by the tenderer and all bidders shall be invited to participate. The bid opening shall be held publicly at the time specified in the bidding documents: the bid opening location shall be the location specified in the bidding documents.

Article 4 The bid evaluation committee established by the tenderee in accordance with the law is responsible for the evaluation work. The bid evaluation committee shall be composed of representatives of the tenderer and relevant experts, and the number of experts shall not be less than two-thirds of the number of bid evaluation committee members. Bid evaluation experts are selected from the expert pool of provincial transportation authorities.

Article 5 The bid evaluation committee shall be formed within 24 hours before the bid evaluation, and the list of its members shall be kept confidential until the winning bid result is determined.

Article 6 During the bid evaluation, the tenderer may invite relevant functional departments to participate in the evaluation as needed, and the bid evaluation committee shall fully consider the opinions of each functional department.

Article 7 The scoring value of this bidding project is based on a hundred-point system. The main content and scores of the bid evaluation committee's evaluation and scoring of the bid documents are as follows:

Scoring content scores

Response to bid 5

First place in the bid document Envelope:

(1) Scheme design document 80

Second envelope of bidding document:

(2) Design fee 15

< p>Article 8: Scoring Criteria for the First Envelope of Bid Documents

Each member of the bid evaluation committee will individually score each scheme design. The design score of each plan is the arithmetic mean of the design scores of each member of the bid evaluation committee after deducting a maximum score and a minimum score.

Score of scoring items

Main station building facade shape 40

Plan function 15

Total layout 15

Design description and cost estimate 5

Auxiliary housing 5

Article 9 The quotation score is based on the lowest quotation. The specific calculation method is as follows:

< p>(1) The bidder’s lowest bid score shall be the highest score:

(2) The bid score of other bidders = 15×lowest bid/offer price.

Article 10 The bid evaluation committee shall make independent scores in accordance with the detailed bid evaluation rules. The bid evaluation committee shall conduct a comprehensive evaluation of the bidders, comprehensively calculate the score results and arrange the order.

Article 11: If after review, the bid evaluation committee believes that all bid plans do not meet the bidding requirements, it may reject all bids and re-invite bids.

Article 12 After the bid evaluation work is completed, the tenderee shall determine the winning candidate based on the evaluation results of the bid evaluation committee.

Article 13 Members of the bid evaluation committee shall perform their duties objectively and impartially, abide by professional ethics, and bear personal responsibility for the evaluation opinions put forward. Members of the bid evaluation committee shall not contact bidders in private, accept property or other benefits from bidders, or disclose their review of bid documents, recommendation of successful bidders, or other information related to bid evaluation. In order to ensure the fairness of the bid evaluation, bid evaluation members are not allowed to carry any communication tools during the bid evaluation.

Article 14 If the successful bidder with the highest overall score gives up the bid and claims that he cannot perform the contract due to force majeure, the tenderer may determine the second-ranked bidder as the successful bidder. If there is no next successful bidder who meets the bid evaluation requirements, the tenderer shall re-invite bids.

Article 15 Unsuccessful bids will be given certain economic compensation in accordance with the provisions of the bidding documents. No compensation will be provided for bids confirmed by the bid evaluation committee as invalid bids.

Planning and design conditions for County East Bus Station

Notice

Branch of Municipal Auto Transport Co., Ltd.:

Declared by your unit The County East Bus Station construction project was approved after study and construction at the southwest corner of the intersection of provincial highways S306 and S305 at the incision of Zhangchang Expressway (the location of groups 7, 8, and 9 of the original Wanfu Village), according to the following planning conditions Planning and design.

1. Design Basis:

1. County Master Plan

2. County Urban Planning Administrative Technical Regulations

3. "Automobile Architectural Design Code for Passenger Terminals" JGJ60-99

2. Land use situation:

1. Planned construction land scope.

The County East Bus Station is located at the intersection of provincial highways S306 and S305

The southwest corner of the intersection is at the incision of Zhangchang Expressway (formerly Wanfu Village 7, 8 and 9 group position).

2. Road planning width:

3. Other planning points:

The planning layout should have clear functional divisions, reasonable traffic organization, complete functions, and advanced facilities. And it must meet the long-term development and use requirements and future expansion requirements.

The total planned land area for construction is 37,227 square meters.

3. Ground control indicators:

Floor area ratio:

Building density:

Greening rate:

4. Architectural design requirements:

5. Municipal requirements:

1. Garbage collection facilities are configured according to regulations;

2. All entrances and exits of bus stations and Safety exits must be clearly marked;

3. The layout of the municipal pipe network within the land must be connected to the urban pipe network.

6. The planned building layout should meet fire protection requirements.

7. Matters to be followed:

1. The planning and design conditions listed in this notice are the basis for our office to approve the planning and design;

2. This project Before applying for a design plan, it is necessary to seek the opinions of the fire protection, transportation and other competent departments;

3. The general layout of the bus station made in accordance with this planning and design conditions notice must be submitted to our office for review and approval ;

4. The power corridors, water supply mains, drainage ditches, communication trunks, etc. within the planned land area of ??this project must reach relevant agreements with its competent authorities;

5. This Notice The book is valid for one month and will be invalid after the expiry date.

"Bus Station Design Tender Book" comes from the Big Secretary Network. This website provides free article search help to all official members. Welcome to the bus station design tender document.