How to take aerial panoramic photography by mango pudding.

Panorama is used more and more in business fields such as the production of corporate aerial propaganda films and aerial photography of scenic spots.

Panoramic aerial photography is mainly realized by later software. I have done a lot of panoramic aerial photography. /anli/70 1_ 1.html This is a panoramic aerial photograph of a scenic spot in Hangzhou. Isn't it beautiful? Ha ha!

Here's how to do it. First, prepare tools:

1, aircraft

2. A computer

3. Splicing software: PTgui (cracked Chinese version)

When everything is ready, we can start shooting.

There are several points to note before shooting: 1 The battery must be sufficient. Pay attention to the weather. Don't fly if the wind is too strong, because the position of the plane is erratic and the photos taken can't be completely spliced.

The altitude of the plane is self-determined, but not too low, 50- 120m.

After the plane circled, it began to shoot. After determining the initial position, adjust the pitch of the lens to ensure that the picture holds up half the sky as much as possible, which is convenient for later patch.

After taking the first picture, rotate the plane horizontally and take the second picture. The second picture and the first picture must ensure that 25%-40% of the pictures overlap.

And so on, until it returns to the original position (take another photo of the original position for stitching).

Then the lens moves down (the angle of moving down is the same as the angle of horizontal rotation, keeping the upper and lower images overlapping by 25%-40%).

Then move down (now the lens angle is close to vertical, just take 4-6 pictures and you can take almost all the rest). Just to be on the safe side, shoot twice more vertically. After the shooting is completed, the next step is splicing.

After the photo is taken, it can be synthesized.

Open the software ptgui-load images and select all the photos taken before.

Camera/lens parameters are optional.

Click Align Images.

After the splicing is completed, the spliced picture will pop up automatically. Note that if the previous shooting is standard, there will be no flaws, unless the photos taken are highly similar, or the computer can't identify the lake and can't splice them accurately. )

Then click "Create Panorama" menu. It should be specially reminded that the pixel ratio of panorama must be 2: 1 (spherical equidistant cylinder).

Output the file location and click "Create Panorama"

Wait for the save to complete.

After the panoramic mosaic output is completed, the next thing to do is to repair the sky.

The method I use to mend the sky is ps. This is the best method I have used so far.

This requires you to prepare a panoramic view of the sky yourself, which can be downloaded online. Quite a lot.

Open ps, import mosaic panorama and prepared panoramic sky.

Then adjust it to a suitable size, and use the mask and gradient tools to blend the sky into the panorama.

Simple picture post-beautification. You will get a complete and beautiful panorama.