What network is the camera connected to?

How should the network camera be connected to the Internet?

The details are as follows:

Step 1: Power on the network camera and connect it to your router or switch with a network cable

Step 2: Under the same LAN, use Open the camera search tool that comes with the camera on your computer, search for the camera’s IP, and change the IP to the same network segment as your computer

Step 3: Enter the camera search tool you want to use in the IE address bar After finding or changing the IP of the camera, log in to the camera in the LAN, enter the camera settings page, and set the relevant network options (usually the default is enough). If the camera has WIFI function, enter the WIFI settings page to set up wireless. If not, Just ignore it;

Step 4: Log in to your router and check whether your routing settings have black/whitelist settings turned on. The camera must be allowed to access the Internet here;

Step 5 Step: Early cameras need to log in to the router to map the network port, and must have certain network knowledge. Products produced after 2014 generally do not require this step and can be ignored.

Step 6: Use a mobile phone with Internet access to install the camera APP, open the APP and enter the camera account and password to access the camera remotely; if you need a computer to access the camera remotely, the same principle applies to installing the software to add a camera to a mobile phone. Just enter your account password.

No, the micro-card camera is connected to a network cable, and Skynet is a network technology used to build a network.

How to connect network cameras with optical fiber?

1. For current cameras, there are fiber optic network cameras on the market, and the back end directly uses fiber optic interfaces.

2. If it is a network camera, then just add a fiber optic transceiver. The fiber optic transceiver is a device that converts optical signals and digital signals.

3. If you are using an analog camera, use an optical transceiver. The optical transceiver is a device that converts optical signals and analog signals.

A network camera is a new generation of camera that combines traditional cameras and network technology. It can transmit images to the other side of the earth through the network, and the remote viewer does not need to use any professional software. As long as a standard web browser (such as "Microsoft IE or Netscape") can monitor its image. Network cameras generally consist of lens, image, sound sensor, A/D converter, image, sound, controller network server, external alarm, control interface

Purpose:

With the rapid development of the Internet, network products gradually cover every corner of our lives. The development and innovation of network cameras are widely used in many fields. Such as education, commerce, medical, public institutions, etc.

Ordinary audio and video camera surveillance systems used in banks, supermarkets, companies and even some homes are gradually being replaced by network cameras, and all filming The content will be transmitted directly to the Internet. You can sit at home or anywhere with Internet access and see real-time updated photos, images or dynamic images provided by the public or private parties.

Civil use. Camera:

1. The maturity of network camera technology

2. The development of Internet access

3. The improvement of public safety awareness

< p>4. The mobile phone video surveillance and alarm system is an intelligent system that has entered the civilian field of security. This system integrates the two major systems of mobile phone monitoring and mobile phone anti-theft alarm. When an illegal person breaks into the restricted area, the system host will be the first to Make calls and send text messages or emails to designated users at the same time! When users receive phone messages, they can use their mobile phones or computers to view the images of the monitored area immediately.

How to connect the camera to the network

If it is a camera equipped with a USB interface, you only need to connect the USB to the computer and download the corresponding driver and video software to view and use it, or call it in the chat software;

If it is a surveillance camera, Only the IPC network camera, that is, the network camera, can be directly connected to the computer through a network cable. Install the corresponding client on the computer or download the plug-in to open it through the browser; if it is other types of cameras, such as analog, AHD, CVI and other cameras, You need to link the camera to the corresponding video recorder, and then connect the video recorder to the computer through a network cable. You can view it on the computer through the corresponding software or plug-in.

For more information about how to connect the camera to the network, enter: View more content