How to use the flasher

Flash is usually used with all kinds of lights in the studio. The flashlight is installed on the camera, and the band receiver is connected with other flashlights. Its main purpose is not to limit the practicality of the flash, which can make more effects and make the flash and ambient light in the photo more natural.

Steps:

1. Paste the receiver with successful frequency matching on the studio lamp, and connect the product to the synchronous interface of the studio lamp through the studio lamp connecting cable.

2. Connect the transmitter with successful frequency matching to the hot boots of the camera, and press the camera shutter to realize the flashing of the studio lights.

Precautions:

1. Please make sure that the frequency of the product has been successfully tuned before the lighting in the studio flashes.

2. In this process, channels need to be adjusted. After the selection is successful, the indicator light turns red, and only one group of channels needs to be selected for a single flash.

3. Pay attention to adjust the camera shutter speed when using. Avoid the flasher failure caused by the camera shutter speed being too high.