What if the 360 camera memory card doesn't work?

The 3-6-0 camera has been used for a long time and can't connect to the app. If you press the reset button, there will be no response, and the camera will not accept the sound wave prompt. Many people think that the camera is broken, but it is not. How much is because the memory card was burned. The memory card needs to be replaced. Or format a memory card. If not, repaint the firmware. The specific method will be described below.

Tools/raw materials

360 camera, a memory card.

Methods/steps

1/4 Step by step reading

First, format the memory card.

Take out the memory card of the camera and format it in the computer, provided that it is in fat32 format. Reinsert the memory card into the camera and try to connect the application to add the camera. If there's a beep, it's okay. If not, repaint the firmware.

2/4

Secondly, download the firmware to the memory card.

Take the Volkswagen 360 camera as an example. Download the firmware yourself or official website (the firmware card needs to be renamed FIRMWARE_D600-2). Rename the firmware and copy it to the memory card to run on the computer. To download the old firmware, the new firmware may not be successful. Yes, I'm upgrading to the new firmware.

3/4

Third, brush the firmware

1 Take out the TF card from the card reader and put it in the slot of 360 smart cameras TF card. 2 At this time, cut off the power of 360 smart cameras. 3. Press and hold the camera setting button (or push the thimble long and press the configuration hole), then turn on the power supply, wait 10 second, and release the button or thimble. 4. Wait about 1 minute, and you will be prompted to complete the upgrade. Tip: During the manual upgrade,

4/4

Fourth, try to connect the phone to the camera.

360 camera requires to turn on the positioning function, otherwise it will not succeed. If positioning is not allowed, open it in the phone settings. Open the 360 camera app on your mobile phone to add a camera, and a prompt will appear to indicate ok and continue the operation. Other versions of also use this method. The official said not to use the relay router, but I tried.

Matters needing attention

The firmware refresh process could not be closed.

The memory card should be in fat32 format.

You should buy a high-quality memory card.