Hikvision camera password error? Take a look at these solutions!

If your Hikvision camera password is entered incorrectly, the camera will automatically lock the user. Don't panic, it's a good idea to power off and restart! Disconnect the camera, wait for half an hour and restart. After that, be sure to customize and enter the correct camera password. If you really forget the password, computer reset is the savior. This article will provide you with a variety of solutions, so that you can easily deal with the problem of password error.

Delete IP channel

If you enter the Hikvision camera password incorrectly, the channel users may be locked. At this point, you need to delete the IP channel and cut off the source of the wrong password.

Plug and play access mode

Please confirm that the access mode of IP channel is plug and play in channel management to avoid manual setting.

Power failure restart

If your Hikvision camera password is entered incorrectly, you can try to access the locked camera IP through web pages or client software. If the login is successful, switch to another IP in the same network segment and restart the device to unlock. In addition, the camera restarts after physical power failure and automatically unlocks after 20 minutes, which is simple and effective!

Activate the network surveillance camera.

Hikvision thinks the network is unreachable? The solution is here! You can't use the network surveillance camera until it is activated. Just press the activate button and click Add, and it will be easy!