Color X800N PRO flash details make photography more professional.

As a photographer shooting still life, all kinds of flashlights have already become important partners in my work. The traditional studio lights are often too heavy, which is not only inconvenient to carry, but also time-consuming and laborious to adjust the lamp position and output power when shooting. With the maturity of hot shoe flash technology, the smaller power is no longer a short board, and the convenient multi-lamp radio TTL flash is more convenient to use. This time, I tried the professional hot shoe flash Pincolor X800N PRO, which was matched with the TTL flasher of King PRO radio.

Color X800N professional flash

I used a lot of overhead flashers. The first feeling of getting this color X800N PRO flash and King PRO flasher is that the color is becoming more and more professional. Color X800N PRO flash is very particular about packaging and product workmanship. There is a flash bag, a bracket and a soft light cover in the product package. If you look at the workmanship carefully, it is as fine as the original lamp.

X800N PRO flash box color is quite exquisite.

The battery compartment of the color X800N PRO flash still uses four 5th batteries. The design of the battery compartment cover is also very convenient, and it can automatically pop up when pressed. In addition, after pressing the button on the flash head, the lamp head can be rotated up and down or left and right, and the left and right direction can also be rotated 180. The advantage of this design is that when the lamp holder is used, the color X800N PRO flash can still rotate freely, and the back of the flash can always face the user, making it more convenient to modify the parameters.

Press the key here to turn the lamp holder.

An angle scale is designed on the rotating shaft of the lamp holder.

The color X800N PRO flash lamp also provides rich interfaces: the external power interface can be connected to the external battery box, which can improve the flashing times of the lamp under the condition of less battery replacement; the synchronous interface is the basic configuration of the overhead flash lamp, and the USB port can be used to upgrade the firmware of the lamp.

There are three external ports on one side of the color X800N PRO flash.

The switch lever of this product is designed with a lock position, which can ensure that the setting of the flash will not be changed due to misoperation without adjusting the setting, turning off the light as a slave light and using wireless control of King Pro.

The toggle power switch is designed as follows

The front of the color X800N PRO flash is designed with a focus assist light, which will light up in the dark or when it is difficult to focus, helping the camera to focus in the dark. 29 dot matrix auxiliary focusing points provide great focusing assistance in dim environment or low contrast scenes. Through the red window in front, you can see the position of the focus assist lamp, and above it are optical and radio sensors.

Pinyin king professional radio TTL flasher

The design of King Pro radio flasher is very classic.

The most important thing of color X800N PRO flash is to add 2.4G wireless control function, which is a great temptation for Nikon users. In addition to long-distance multi-lamp linkage, it can also cooperate with King Pro to complete more lamp arrangement and combination. Users can install a color King Pro radio flasher at the top of the machine, and the off-board flasher function of grouped TTL can be realized without installing a receiver at the flasher. Many parameters of the flasher can also be adjusted at the top of the machine without switching back and forth to the slave flasher.

The side of King Pro is designed with 1/4 inch screw holes.

King Pro also presented a hot shoe seat in the package, which can be attached to the surface of the object to fix the flasher. Moreover, the flash hot shoe is equipped with a hot shoe protective sleeve, which has certain dustproof and waterproof ability without installing a flash.

There is also PC flash synchronization and USB port on the side of the flasher, which can be used as firmware upgrade.

The flasher supports three groups of control: A, B and C.