How to adjust Benagli Lanbaolong 302s headlights?

1, find the headlight adjustment screw: Most car headlights have adjustment screws or knobs, which can adjust the direction and angle of the light beam horizontally and vertically. Usually these screws are located in the housing behind or around the headlights.

2. Prepare adjustment tools: According to the requirements of the vehicle manufacturer, choose the appropriate tools, usually using screwdrivers, wrenches or special adjustment tools.

3. Vehicle preparation: park the vehicle on a level ground to ensure that the front and rear tire pressures of the vehicle are normal and the vehicle body is not overloaded.

4. Adjust the horizontal direction: turn on the headlights of the vehicle, find the adjustment screw in the horizontal direction, and gradually turn the screw to align the beam of the headlights with the horizontal line. It is usually possible to judge whether the adjustment is correct by observing the projection of the light beam on the wall or the ground.

5. Adjust the vertical direction: find the adjustment screw in the vertical direction and gradually turn the screw to make the headlight beam aim at the required height. Similarly, whether the adjustment is correct can also be judged by observing the projection of the light beam on the wall or the ground.

6. Testing and fine-tuning: After the horizontal and vertical adjustment is completed, test whether the headlight beam meets the expectations. If fine adjustment is needed, you can continue to rotate the corresponding adjusting screw.