Apple xsmax rear camera black screen flash can't turn on the camera to heat up.

What about the camera black screen of Apple xsmax?

What about the camera black screen of Apple xsmax?

1, forced restart device iPhoneXSMax forced restart mode: press the volume up button, and then release it quickly. Press the volume down button and release it quickly. Then press and hold the side button until you see the Apple logo. If the black screen problem will appear again after the restart, it is recommended to send it to Apple for further testing after the official release.

2. Take it to the maintenance point for inspection first. Maybe the camera cable fell loose on the ground! Turn off and restart the iphone, and then turn it on. It may also be caused by a problem with the iphone system. If all the above methods have been tried and you still can't turn on the camera, please contact Apple's after-sales service.

3. Click the "Back" button to try to exit the software. Exit and re-enter if possible. If you can't quit the software, it is recommended to restart the phone: press and hold the power button and volume button for more than 7 seconds at the same time to restart the device; If the screen still appears after opening the software again, this situation may be related to the software used.

4. If you can't find the specific cause of the fault, you can send the mobile phone to the crazy master for repair and let professionals help you solve this problem. At present, the "repair service" supports more than 30 kinds of fault maintenance, including common problems such as forgotten password, unable to start, continuous restart, machine crash/stuck machine, data recovery/export, white apple and so on.

I am a mechanic. Let me tell you something. There are only two reasons for this. The first one is that the aftershot itself burns and can be changed. The second is that the chip that can control the camera is burned. This chip is on the motherboard, called camera ic module, and the module can be replaced. No need to change the motherboard. The schematic diagram of this module is as follows.

6. Some iphone are not so well sealed after disassembly and maintenance, which may also lead to a black screen or blurred lens. Metal or magnetic protective covers or camera accessories may interfere with the camera. Causing the phone to be black.

Xsmax rear camera and flash are not on. What's the solution?

Xsmax rear camera and flash are not on. What's the solution?

Also, if the flash is used for a long time and the temperature is high enough, the system will protect it, turn off the flash, and it will work normally after the temperature is restored. If forced to use, there will be a warning.

If the flash does not work with the above method, it may be caused by hardware failure, and the mobile phone needs to be sent to Apple's after-sales service point for maintenance. Precautions for buying a mobile phone: if you buy it offline, you can turn it on on the spot in front of the clerk and solve the problem immediately.

Taking Apple 1 1 and IOS 13 systems as examples, the reasons why the flash of Apple's mobile phone can't be turned on and the solutions are as follows: the battery of the mobile phone may be low, and the camera flash and flash can't work normally. At this time, you need to charge your mobile phone and use the flash normally when it is fully charged.

Take it to the maintenance point for testing first. Maybe the camera cable fell loose on the ground! Turn off and restart the iphone, and then turn it on. It may also be caused by a problem with the iphone system. If all the above methods have been tried and you still can't turn on the camera, please contact Apple's after-sales service.

If the flash does not light up due to system reasons, it is recommended to restore the system. Settings-General-Restore-"Erase all contents and settings". Use itunes to restore the system. Install and start.

Take it to the maintenance point for testing first. Maybe the camera cable fell loose on the ground! Please click the picture description to turn off and restart the iphone, and then turn it on.

Led advertising big screen

Led advertising big screen

1. Advertising release uses LED display system to play advertisements in various forms such as pictures, videos and texts. LED display screen can be used as a commercial advertisement to attract customers and improve the visibility of enterprises. The LED display screen is placed in a place where people are concentrated, with wide contact area and direct information transmission.

2. You turn on the big screen every day, even if there are no advertisers.

3. The played pictures are vivid and lifelike. The visual impact on users is very strong. Outdoor led large-screen advertisements have wide coverage and diversified advertisements. Energy conservation and environmental protection. The above are the main functions and advantages of led advertising screen.

4. Outdoor full-color LED screens are widely used in public places, advertisements, urban road networks, urban parking lots, railways, subways and other traffic guidance systems, highways and so on. Using VGA synchronization technology, the content of big screen is synchronized with CRT, and it is simple and convenient to change the advertising content; Large screen, super vision, high brightness and long life.

Apple's rear camera black screen flashlight cannot be turned on. What happened?

Apple's rear camera black screen flashlight cannot be turned on. What happened?

1, hello. In this case, it may be that the camera module of the rear camera has failed. But this kind of fault can be divided into software and hardware. Software failures can be solved by restoring factory settings. Before replacing the internal hardware, it is necessary to replace the hardware failure. Specific problems also need after-sales testing.

2. Uninstall third-party applications: Sometimes some third-party applications may interfere with camera operation. Attempt to uninstall related applications. Software update: Check whether you need to upgrade the operating system of iPhone, which may fix this problem.

The camera should be broken or the cable is loose. If the cable is loose, just disassemble and install it. If the camera is broken, replace it. The camera and flash are plugged into the motherboard. The plug may fall off after falling, or the hardware may be damaged, so it needs to be disassembled for inspection.

4. Camera module failure: On 8Plus, the rear camera module may fail, resulting in a black screen or failure to work normally. Try restarting the device or continuing the operation. If the problem persists, it is recommended to send the equipment to an authorized repair center of Apple for repair or replacement.

5, undefined common Apple mobile phone camera failures generally have the following situations: boot black screen, mobile phone flash can not be turned on. Unable to use camera 2x or 1x for imaging. Turn on the phone to take pictures, and the camera can't focus.

What if Apple's rear camera can't open the black screen?

What if Apple's rear camera can't open the black screen?

Let's click the Settings option in the main interface first. After entering the setting interface, find and click the privacy option. Find the camera after entering the privacy option. Select the corresponding software to be opened by the camera and check it.

The reason why the black screen flash of Apple's rear camera can't be turned on: the camera hardware problem. System version BUG problem. Turn off the phone and restart it to see if it is back to normal. If it is abnormal, press and hold the ON/OFF key and the Home key for more than 5 seconds at the same time, and the phone will automatically restart to see if it is normal.

Apple's rear camera failed to open: restart the phone: open the phone to enter the settings. Slide down to find GM, click in, then slide down to find "power off" and restart the phone. Software Update: Turn on your phone, go to Settings, find General, and then click Software Update.

If the rear camera of the iPhone7Plus is black and the flashlight can't be turned on, you can try the following operations: Restart: Try to restart the iPhone, and sometimes it can return to normal. Check camera settings: Check camera permissions to ensure that the camera is not disabled, or try to clear the camera cache.

Hello, after Apple's mobile phone broke, the camera turned on and the rear camera went black. Maybe the system or camera is damaged. Can be repaired. There is no need to spend money, and the specific method is as follows: reduction. Settings-General-Restore-Restore all settings and delete all contents and settings. Update the system. Settings-General-Software Update.

-1 Step 1 Enter Settings General-Open the phone settings icon and click General Options. 2 Choose to transfer or restore! -2 Step 2 Select Transfer or Restore-Click Transfer or Restore iPhone, and then click Restore Options.

IPhonexsnax rear camera black screen flashlight cannot be turned on. Is there something wrong with the cable?

IPhonexsnax rear camera black screen flashlight cannot be turned on. Is there something wrong with the cable?

1, the camera should be broken or the cable is loose. If the cable is loose, just remove and install it. If the camera is broken, it should be replaced. The camera and flash are plugged into the motherboard. The plug may fall off after falling, or the hardware may be damaged, so it needs to be disassembled for inspection.

2. The reason why the black-screen flashlight of Apple's rear camera can't be turned on is the camera hardware problem. System version BUG problem. Turn off the phone and restart it to see if it is back to normal. If it is abnormal, press and hold the ON/OFF key and the Home key for more than 5 seconds at the same time, and the phone will automatically restart to see if it is normal.

3. The reason is as follows: When we use the camera on WeChat or other applications, we sometimes encounter a black screen. This is mainly because the application cannot access the camera. The mobile phone card is stuck and the flashlight can't be turned on. The solution to the camera's black screen is as follows: We can click on the phone settings to enter privacy.

4. A cable problem; 2. The installed software conflicts; Three cameras are broken. Suggested solution: Look at the top of the back of iPhone6, next to the camera, for mechanical damage or being blocked by the phone case. If there is a problem, rule it out first.

5. If the flashlight of the rear camera can't be turned on, the light in the flash is broken. So it is necessary to check whether the camera is broken.