How to make posters with psd? Steps of making posters with ps

How to make a poster with ps Whether it is a poster or any other form of graphic work, you can change the resolution by setting it in PS. To make a poster, the most basic thing is composition. Consider layout and size first. Generally speaking, posters to be printed need a resolution of 300 pixels per inch. If you only need 72 on the computer. The color mode to be printed is set to CMYK, and the RGB mode is displayed on the computer. Set the size to 800X600 and start drawing. Of course, you can change the size of the canvas appropriately. Remember to always keep complicated posters. Because the PSD file size of a poster is often tens of meters, temporary files will consume a lot of memory. Look for material on the internet after you have conceived it. Unless professionals can draw their own pictures (pictures are also copyrighted), they can make their own posters according to their personal preferences. Posters are usually saved as pictures in JPG format. If it is for commercial use, you need to know how high the resolution of the poster you want to print is. For example, sometimes some * * * inkjet printing only needs a resolution of about 50. However, some prints require a resolution of more than 300. The higher the resolution, the more space the document takes up. Of course, everything depends. If you make a poster of ordinary class paper. I suggest that your resolution is 300. In addition, the resolution of the material picture should not be too low, otherwise it will be blurred after stretching. The specific setting method is to create a new file, and then change it in the resolution column. You can also change the open file by right-clicking the top of the file box, selecting the resolution column, and entering the corresponding resolution number. (First, in the drawing size, set the length and width to the actual length and width of your poster. For example, if you want to print a poster with a size of A 1, set the length and width to 84 1×594mm (slightly larger). Then, set the resolution to 100dpi. If your computer is fast and has a large memory, you'd better set it to 10 dpi. If it is not fast enough, you have to retouch and change the picture many times, and it is also possible to set it to 80dpi. Try to use some vector pictures and vector lace, and the effect is very good. Then add the design part, try the color gradient and relief effect, and then try a more personalized font, such as seal script, or design it yourself. In addition, the poster must highlight the consciousness of "point", which makes people feel eye-catching and attractive. Steps to make posters with ps 1. The first tool you need is PS. Click the PS software, and then click to create a new canvas.

2. After selecting the required size, we can drag the prepared basemap into the previously selected canvas.

3. Then roughly adjust it according to the size standard you need, and then you can pull the picture where we need to put it, and other redundant parts can be removed.

4. Then click the rectangle tool in the left toolbar and draw a box on the canvas, which can be used as a decorative font style sheet.

After it is finished, you can write some words you want to write in it, and then adjust the size and position.

6. Finally, use English fonts to match fonts. Why should English fonts be arranged? If it's just a big Chinese font, it may be a bit monotonous, so you can modify it appropriately.

This solves the problem of using PS as a poster.

Find a corporate service and go to Pig Bajie. Com, delivery, acceptance and payment.