Traditional Culture Encyclopedia - Photography and portraiture - Difference between t5 and t8 lamps

Difference between t5 and t8 lamps

There are four differences between T5 and T8 lamps:

1, the two sizes are different. T5 lamp is suitable for smaller lamp, and T8 lamp is longer for larger lamp. You need to measure it before buying it.

2. The brightness of T5 tube is slightly weaker than that of T8 tube, because T5 tube itself is smaller and T8 tube is higher.

They are different in environmental protection. T5 lamp uses fluorescent powder, which consumes more energy, while T8 lamp is more energy-saving and environmentally friendly.

4. The energy-saving characteristics of these two lamps are also different. T5 lamp is small, so it consumes less power in the same time, while T8 lamp consumes more power.

What's the difference between t8 tube and led tube? 1 and t8 lights are different in brightness from led lights, and t8 lights are brighter and bigger.

2. From the appearance, t8 and led tubes are also different. T8 is a thick and long tube, and led tube is relatively small.

3. The service life of the two lamps is also different, and the service life of the led lamp can be twice as long as that of the t8 lamp.

4. Their color rendering properties are different, and the color rendering of led tubes is better.

5. The diameters are different, and t8 is larger.

There are many kinds of lamps on the market, so you need to see their brands and certificates clearly when buying them.

How to install the decorated led lights? It is best to install LED lights on the integrated ceiling. Ordinary offices and shops will be installed on the integrated ceiling. First remove a ceiling, then put the LED panel lamp driver on the ceiling next door, connect the power supply, and put the panel lamp on it to complete the installation.

When installing LED lamps, it should be noted that the voltage of LED lamps is generally DC 12V, so switching power supply is needed. You can buy a high-power switching power supply as the main power supply, and then connect all the input power supplies of LED lamps, which can be controlled centrally.