5d3 How to do degraded shooting, delay and interval.

1. degraded shooting 5D3 does not have this function.

2. The time-delay shooting steps are as follows:

(1) You need a stable tripod first. Time-lapse photography needs a relatively fixed position. During each shooting lasting several hours, the camera keeps a relatively fixed distance and level from the main body of the scene.

(2) The next step is to prepare for timing pay-off, so that digital SLR cameras without the functions of "timing shooting" and "interval shooting" can automatically complete a group of photos within a set time. Moreover, its setting is simpler than many digital SLR cameras with "interval shooting" function. Finally, empty the memory card before shooting. A large-capacity memory card can guarantee your shooting needs all day.

(3)? In general, it is recommended to use camera M, that is, manual exposure mode, to determine a fixed aperture, shutter and sensitivity.

(4) Set the white balance to manual. You can set the white balance on site by yourself or manually adjust the K value. Then, turn off the automatic dark compensation function of the fuselage (high light tone priority, Canon camera automatic brightness optimization), eliminate all exposure factors decided by the camera, and start taking pictures.

Extended data:

Time-lapse photography, also known as "timing photography" or "time-lapse photography", is a special photography method. Time-lapse photography is a photography technique that takes an image or video at a low frame rate and then plays the image at a normal or faster rate. Using the time delay controller, the shutter takes pictures at regular intervals and continuously displays several photos taken after a period of time.

How long should we shoot that scene? How many photos did you take? At this time, you need to use the following two calculation formulas:

Shooting duration (minutes) = shooting interval (seconds) ×24× the duration of the final required clip (seconds) ÷60.

Number of shots =24× the length of the final required clip (seconds)

According to these two formulas, we can easily calculate the number of photos to be taken.