How to increase the number of frames in 2077

Color difference (after closing) the picture becomes sharp.

2. The depth of field (before closing) simulates the camera effect

3. Glare (before turning off) simulates camera aging

4. Cascading shadow, long-distance shadow resolution and detail level (before closing) all have a certain cpu load.

5. Contact shadow, shadow grid quality and ambient light shading (after turning off) affect the image quality, and the number of frames has little change.

6. The fog and cirrus cloud (before closing) determine the picture quality level. Suggested image quality

7. Screen space reflection, subsurface scattering (after closing) and medium volume effect can increase the number of frames by 5- 10.

8.(20 series and other upper and middle graphics cards can be considered off&; Turn down the above special effects and turn on dlss)

9. There is no dlss graphics card such as 1660super? Color noise, screen space reflection, two volumes and color accuracy (after closing) frames have been significantly improved.

10. The above settings are modified, and medium and low graphics cards are also applicable.

The high-end graphics card is set as follows under the premise of less closing effect:

1.？ (It is recommended to turn on) ray tracing reflection: the ground reflection effect of the car body.

(It is recommended to turn off) light tracing: there are too many shadows on detailed objects.

(It is recommended to turn off) Ray tracing global illumination: the absorption of offline by the environment.

The debugging configuration of medium and low graphics cards is as follows:

(Recommended Off) Screen Space Reflection Quality

(Turn off or adjust to medium as appropriate. The picture is quite different after closing) color accuracy, mirror quality, ambient light occlusion, volume fog, volume cloud.

(Recommended off) Shadow grid quality, local shadow quality

Dynamic rendering rate (sharpness)

1. maximum number of frames: full. Minimum value: 50. Maximum value: 60

2. On the computer, open the graphic control panel!

Software settings! ! Add Cyberpunk2077.exe to adjust the image sharpening (sharpening setting: 0.38).

1060: (except for the following four items, all the others are adjusted to the highest level) FXAA image sharpening settings need to be turned on in the graphics card driver settings outside the game: 0.26)

1 (It is recommended to turn off) screen space reflection.

2 (Adjust) Volume Fog and Volume Cloud

3 (on) static rendering rate; Adjust the resolution to about 80.

4 (shutdown recommended): color difference and particles.

Advanced settings

There is no obvious change in the number of open and close frames of contact shadow.

There is no obvious change in the number of switching frames for geometric enhancement of facial illumination.

The number of anisotropic frames 1- 16X has no obvious change.

There is no obvious change in the quality of local shadow mesh and the number of high frames.

Local shadow quality deviates from high gap by 3 frames.

There is no obvious change in the number of middle and high frames in the cascade shadow range.

Cascade Shadow Resolution Low-High Gap 2 Frames

There is no obvious change in the number of high frames in the long-distance shadow resolution.

Volume Fog Resolution Off-Super Gap 10 Frame

Volume Cloud Mass Passing-Super Gap 2 Frames

The maximum dynamic decal level-super frame number has no obvious change.

Screen space reflection quality off-super gap 12 frame off-low gap 4 frames

In subsurface scattering, the number of high-quality gap frames has not changed significantly.

Ambient light occlusion off-high gap 7 frames

Difference of medium and high color accuracy in 6 frames

Mirror quality is off-the high frame number has no obvious change.

The level of detail is high-the number of high frames has not changed significantly.

Static fidelity FX CAS on

Resolution 100%