Can I change the camera of the sports master show?

Sports masters show that cameras can be changed. The steps are as follows.

1. Prepare to install camera accessories, including pliers, screwdriver, camera, camera charger, camera bracket, chassis and BNC connector, and connect them with BNC wires.

2. Pick up the camera bracket and install the chassis on the bracket.

3. Install the camera on the bracket.

4. Check whether the power supply is camera power supply.

5. Connect the power plug and the camera plug.

6. Take out the BNC wire from the head and cut off the copper wire in the middle.

7. Take out the BNC interface and tighten it with a screwdriver.

8. Fix the bottom with pliers.

9. After the two ends are connected, connect the camera with the computer host or camera hard disk.

10, after debugging, you can see the monitoring screen on the computer.