Traditional Culture Encyclopedia - Photography and portraiture - What if the reversing image is blurred and foggy?

What if the reversing image is blurred and foggy?

The reasons for the blurred reversing image are that the reversing camera is dirty, the camera has water vapor and the camera itself has low pixels.

The treatment method is as follows:

1, the reversing camera is dirty.

If you often drive on roads with more dirt and dust, the car body will easily get dirty, and the external reversing camera will undoubtedly be affected.

Solution: Clean the vehicle, or just clean the position of the reversing camera.

2. There is water vapor in the reversing camera.

The vehicle environment is humid, and the waterproof performance of the camera is poor. When washing the car, the camera gets water, which leads to the camera blurring.

Solution: You can remove the camera, seal it with some glue, or directly replace it with a better quality camera.

3. The pixel of the reversing camera is low.

The pixel capability of the camera itself will definitely affect the viewing effect of the display screen. However, it is necessary to remind car owners that the picture quality is linked to the price, and everyone will be willing to spend a little money to buy a camera with better picture quality.

Solution: buy a reversing camera with higher definition, and it is best to choose a camera with night vision effect, so that the imaging effect will be better under the same lighting conditions.

4, poor line contact.

If the reversing image is not only blurred, but also like snowflakes, then the reversing image is probably caused by poor contact.

Solution: Check whether the reversing image connector is loose.