Traditional Culture Encyclopedia - Photography and portraiture - How to maintain the electronic moistureproof box?

How to maintain the electronic moistureproof box?

The temperature is changeable, and more and more families and electronic industrial units pay attention to moisture prevention and dehumidification. Electronic moistureproof box has become the best choice for moisture-proof and dehumidification because of its convenient installation, fast and stable dehumidification, and its application in families and industries is becoming more and more extensive.

Such as image materials, photographic equipment, digital electronic products, stamps, advanced collectibles, electronic chips, silicon wafer electromagnetics, medicines, optical supplies and other items that are afraid of moisture, as well as solar energy majors, electronics majors, universities and research institutes.

However, as an electronic product, the electronic moistureproof box also needs the usual maintenance. Here is to introduce some problems that should be paid attention to in the usual maintenance of electronic moistureproof box.

1. The electronic moistureproof box must be placed on a flat and solid surface with no sundries around, and the distance from the wall shall not be less than 30cm.

2. Put the partition into the box, and place the articles according to the bearing ratio of the laminate.

3. Don't put it in the direction of airflow, such as air conditioning outlet, local high temperature.

4. Don't put it in direct sunlight, smoke and water vapor.

5. Connect all power cords in series according to the numerical sequence on the power plug, and then plug in the power supply (220V/50HZ).

6. The humidity can be set, and the product can be connected with the up and down buttons to adjust the humidity to the required value.

7. If it is used again or not used for a long time after the first power-on, it should run idle for more than 24 hours, and admit that the humidity has dropped to a lower level.

8. If there is a stain on the air outlet of the dehumidifier, please wipe it quietly with a clean towel. Do not use wet towels or wash with water. If the air outlet is seriously blocked by stains, please call after-sales service to help you deal with it.

9. Electronic moistureproof box should be cleaned regularly. When cleaning the moisture-proof cabinet, unplug the power plug first, wipe the inner and outer surfaces of the moisture-proof cabinet with a clean alcohol cloth, and stop washing the moisture-proof cabinet with water.

If you wipe with detergent, after wiping the detergent with a clean wet cloth, be sure to dry the water with a dry cloth.

When cleaning, be careful not to hit the dehumidification host and humidity detection equipment.