How to connect a high-definition camera to a computer

How does the camera connect to the computer monitor?

Method for connecte camera to computer monitor:

1. First of all, the motherboard and configuration of existing desktop computers support connecting cameras.

2. In addition to the surveillance camera, the installed equipment also has a video capture card, plus a video cable and a power cord.

3. Video capture is installed on the computer motherboard. Generally, four channels are enough, depending on how many cameras are installed.

4. Try to use professional video cable. The scientific name is coaxial cable. It is also possible that someone installed it with a network cable, and the effect may not be as clear as the video cable.

5. If you want remote monitoring, when you buy a video capture card, just buy one that can be monitored remotely. When using, install a client in the mobile phone, connect the desktop computer to the Internet, and you can see the monitoring screen in the mobile phone anywhere.

How does Sony camera connect to computer through USB?

After connecting the camera to the computer, you need to turn on the camera and select USB mode. The operation is as follows:

1. First, connect the camera to the computer through a USB cable;

2. Then turn on the camera;

3. After the camera is turned on, it will be prompted to select the mode, select the "USB" mode and confirm;

4. After selecting the mode, you can open the storage space of the camera on the computer.

1. Connect the data cable configured for the camera to the USB interface of the computer. As shown in the figure

2. Then turn on the camera power switch. As shown in the figure

3. Check whether the camera displays USB mode. As shown in the figure

4. Click to enter the camera memory card after the connection is successful. As shown in the figure

5. locate the PRIVATEWE folder and select the AVCHD folder. As shown in the figure

6. Just copy the required information into the AVCHD folder. As shown in the figure

Extended data:

(1) When using a home video camera, don't aim the lens at the light source for a long time, so as to avoid the lens shooting the same scene for a long time, especially in the case of large contrast between light and dark.

(2) Before the home camera is connected with other TV equipment, all power supplies must be cut off.

(3) After using the home camera, close the aperture, cover the lens, turn off the power switch, unplug the power plug or take out the battery.

(4) When the camera is adjusted and used, it should avoid the magnetic field to avoid image jitter and distortion.

(5) Avoid using the camera in places with high humidity, dust or corrosive gas.