Instructions for use of Fuji camera

1, shutter key (p22) 2, switch (power supply) key (p 18) 3, flash (30) 4, automatic photography indicator (p32) 5, lens/lens cover (P46) 6, microphone (P46) 7, speaker (p4

8. LCD screen (p 1 1) 9, display (photo display) ∕BACK (P22.39) (still photography) key (p3 1) 10, indicator light165433. Button (p2 1.40) 13, USB multi-level connector jack (p 13.48.55.57) 14, (playback) button (p39) 15, sling hook. Battery insertion part (p 12) 19, battery disassembly button (p 12) 20, memory jack (p 15)

Turn the power on/off (p 18)

Press the on/off key to turn on the power supply; Press it again to turn off the power.

※ Turn on the power by playing mode: press and hold? The replay key is about 1 sec, and the power is turned on; During playback, press? Replay key, turn it off.

Set the language and time used (p 19)

After purchasing the camera, the language and time used were not set when the camera was turned on for the first time. You can choose the language to use and set the time in the following order.

1. Turn on the power and the language setting screen will be displayed.

2. Select the language to use.

3. Press the MENU∕OK key to set the language and display the time setting screen.

4. Change the setting item (year, month, day, hour and minute) by selecting the setting item and using the up/down arrow keys (▲▼).

5. Select the year, month and day.

6. Select the date order from year, month, day, month/day/year, day, month and year.

7. Press the MENU∕OK key, and when the language and time are set, you can start shooting.

※ Correction: If you want to reset the language and time, you can reset it through the setting menu (セットァップメニュー).

Note: After the battery is taken out and stored for a long time, the set time will be automatically eliminated and displayed on the confirmation screen. The battery is charged for about 2 hours, and the set time can last for about 24 hours even if it is taken out again.

Basic photography and playback (page 20)

■ (Automatic) Photography This paper introduces the basic operation process of photography.

Turn on the camera (page 20)

1. Press the on/off key to turn on the camera.

2. Confirm the battery charge.

Confirm the power supply through the LCD screen (see page 20)

Straighten the camera and determine the view (p2 1)

1, calibrate the camera.

2. Determine the framework.

Focus adjustment, photography (page 22)

1, press the shutter button halfway to focus on the shooting scene in the AF frame.

When the focal length is aligned, the camera makes a "beep-beep" sound, and the indicator light is green.

When the focal length is out of focus, "! AF ",the indicator light flashes green. At this time, either change the framing or use "AF∕AEロック" (see page 27).

3. Press the shutter button halfway, and then press it all to finish shooting.

■ Look at the photos taken (page 24)

1, press the (replay) key.

2. News? Or? , select the photos you want to view.

? : Displays the previous photo.

? : Show the next photo.

Correction: Half press the shutter to return to the photographic screen. ※.

Note: Delete photos. You can delete photos by operating the menu (see page 43).

All kinds of photography (p25)

■ Use "Yan" photography (author's note: highlighting facial photography) (P25)

If you use "Yan キレィナビ" photography, the camera will automatically detect the person's face, aim the focal length and brightness at the person's face instead of the background, and shoot the person brightly and prominently. Suitable for shooting when people are arranged left and right, and the focal length is easy to aim at the background.

1. Press the MENU∕OK key to display the photography menu.

2. Press the up and down keys to select "Strict"

3. Right-click to move to Settings Change.

4. Select the setting of "Yan キレィナビ".

5. Press the MENU∕OK key to confirm. At this point, the photography screen is displayed. Open "Yan Yan" and the LCD screen will display photos (as shown in the upper right picture of p25).

6. Aim at the subject and determine the angle of view. A green box will be displayed on the character's face. When the camera detects several faces, the face near the middle is green and the other faces are white.

7. photography. Aim the focus and brightness at the face in the green frame, and then take a picture.

※ If you use Yan camera, you can take your own photos automatically when you travel.

■ "AF ∕ AE ロック" photography (author's note: focus ∕ brightness locking photography) (P27)

When still painting photography, press the shutter button halfway to set the focal length and brightness. Keep the half-press state to fix the focal length and brightness, which is called "AF∕AEロック". This is very convenient when you want to shoot objects outside the center of the picture.

1. Align the autofocus frame with the object whose focal length needs to be adjusted.

2. Half press the shutter.

3. Keep half-pressed and change boxes.

4. In the half-pressed state, press the shutter fully, and the photography is completed.

■ Close-up photography (large) (page 29)

Use it when you are close to the subject and want to take a big picture.

1, press (? ) key (see the upper left figure of P29) and set it to "マクロ" (large).

When set to "マクロ", the "Floret" pattern will be displayed (see the picture in p29).

2. Determine the framing and adjust the focal length.

Correction: Use the zoom key (W∕T) to adjust the view. ※.

3. photography.

To cancel taking a big photo, press (? ) key. Turn off the power of the camera or switch the photography mode, or cancel taking a big picture.

Correction: hands tremble easily when taking big pictures. A tripod is recommended. ※.

When taking a big picture, the focal length is fixed near the center.

■ Flash photography (page 30)

Please use the flash when taking pictures at night or in a dark room.

1, select the flash setting. Every click (? ) key (see p30 left figure), the setting will be switched. (Flash setting: See the description on the right side of p30)

2. Determine the framing and adjust the focal length.

3. photography.

■ Take photos with a self-timer (page 32)

This camera has two functions, namely "10 seconds to take a picture" and "2 seconds to take a picture" to prevent the camera from shaking when the shutter button is pressed.

1, set the selfie. Every time you press the (▼) key, the settings will switch.

Please choose from "/kloc-photography after 0/0 seconds" and "photography after 2 seconds".

2. Adjust the focal length after framing.

3. Start taking selfies. Press the shutter button completely and the self-timer will start. When the shutter time expires, the LCD screen displays the number of seconds. If you want to stop halfway, just press the DISP∕BACK key.

Note: Don't stand in front of the camera when you press the shutter. When the focal length is not aligned, sometimes the brightness is not appropriate.

When using "/kloc-take photos after 0/0 seconds", the self-timer light in front of the camera lights up and flashes before taking photos. With "photography after 2 seconds", the selfie light flashes at the same time as the selfie starts.

■ "Photography" mode suitable for the scene (page 34)

By switching this photography mode, settings suitable for the scene can be made. Set the photography mode (page 34)

1. Press the MENU∕OK key to display the photography menu.

2. Choose a photography mode.

3. Display the selection screen of photography mode.

4. Select the photography mode.

5. Press the MENU∕OK key to set the photography mode.

※ Correction: Please refer to p 104 for the flash that can be used in various photography modes. Types of photography modes (page 35)

Operational Guidelines Photographers can freely set exposure correction (see P66), color balance (see P67) and other photography functions.

As long as the camera is aimed at the subject, the camera will automatically identify the shooting scene and make the most appropriate settings.

After the camera determines the most suitable scene, the scene pattern is displayed at the lower left of the screen (author's note: symbol sign).

See the top right of P35 for scene content and scene mode description. ※.

※ If the scene cannot be recognized, the camera will take pictures in automatic mode.

Automatic (page 36)

Simple operations based on camera automation can take beautiful photos. For the operation process, please refer to automatic photography (see page 20).

Babies-You can photograph babies' skin naturally. The flash is always in a non-luminous state.

Reduce jitter-suitable for shooting agile subjects such as children and pets. By pressing the shutter quickly, the jitter between the hand and the subject can be reduced.

People-suitable for shooting people. The photos are natural in color and give people a soft feeling.

Scenery-suitable for shooting scenery during the day. Can make buildings and landscapes clearly visible. Panoramic stereoscopic images-The images of three lenses can be combined into 1 stereoscopic images.

1. Select the panoramic stereoscopic picture through the photography menu.

2. Press the ▲ key to select the shooting direction, and then press the MENU∕OK key to confirm.

3. photography. The exposure and white balance of the panoramic stereoscopic picture will be set by shooting the first lens.

4. Press the MENU∕OK key. As shown in P36, the edge portion of the first lens is displayed in a translucent manner.

5. (As shown in P37) When determining the framing of the next shot, it should overlap the translucent part.

6. Repeat the above steps 3 and 4 to shoot and record the second shot.

7, according to the essentials of step 5, determine the framing and shoot the third shot.

8. Press the MENU∕OK key to display the panoramic stereo photo.

9. Press the MENU∕OK key to save the panoramic stereoscopic image. You can't save a picture.

All kinds of playback (see picture) (page 39)

■ Play back a shot (page 39)

News? Key, the last shot image (1 sheet) will be displayed.

To view the previous image, please press? key

To view the last image, please press? key

※ Switching of LCD. Every time you press the DISP∕BACK key, the playback display mode will be switched once (see P39 on the right).

■ playback amplification (page 40)

When playing back a shot, the picture can be enlarged.

Press the W key to reduce the picture, and press the T key to enlarge it.

In the process of enlarging the display screen, press the ▲▼ key, and the screen can move within the range displayed on the LCD screen.

To cancel playback amplification, press the DISP∕BACK key.

■ Multi-lens playback (P4 1)

The camera can display 2, 9 and 100 lenses at the same time. After comparing the pictures, choose the one you want to see.

Every time you press the W key, the number of displayed pictures will increase in the order of 2, 9 and 100. Every time you press the T key, the number of pictures displayed will decrease.

※ Press the ▲▼ key to select the picture.

Press the MENU∕OK key to display the selected picture (1 sheet).

■ Joint date playback (page 42)

1. Displays the playback screen with the date.

Press the DISP∕OK key repeatedly in the playback picture of one shot until the next picture is displayed. At this time, a display screen played back by one lens is selected (as shown in P42).

2. Press ▲ or ▼ to select the date.

3. news Or? , select the picture you want to view.

Description: How to fast forward?

● Press and hold ▲ or ▼ for a long time to change the date in fast forward mode.

● Long press the ▲ or ▼ key to fast forward the picture on the same day.

■ Delete the picture (page 43)

By playing the menu, you can delete the pictures of 1 shot, or delete all the pictures in the memory/memory card. Once deleted, the party cannot recover. Please copy the pictures you don't want to delete to your computer in advance.

■ Delete 1 shot through the play menu (page 43)

To delete a picture through the replay menu, you can do the following:

During 1. playback, press the MENU∕OK key to display the playback menu.

2. Select "Cancel" (Delete).

3. Go to Settings Change.

4. Select 1 lens.

5. Press the MENU∕OK key to display 1 photo deletion screen.

6. Select the picture to delete, and then press the MENU∕OK key to delete the lens in the display.

When the MENU∕OK key is pressed, the picture is deleted. Be careful not to delete by mistake.