The memory of car reversing photography is full.

1, Crash, No Boot: Crash refers to the situation that the machine does not start or does not respond when it starts, and stays in a certain state!

Solution:

(1) Take out the SD card or TF card first, and press the power-on key to confirm whether it can be turned on.

(2) If it is still not turned on, please look at the side of the machine, find the "RESTE" hole, reset the hole with a soft bucket, and then press the power button to see if it is turned on.

(3) If the black box starts normally, it is a card problem. Please format your card next.

(4) Insert the card after formatting. If this happens again, I suggest you change your memory card.

No boot refers to the situation that the machine does not work when it is started or is confirmed by the solution of the crash after it crashes.

Solution:

(1) Check whether the power cord is normal, whether the vehicle charging power indicator lamp works, and whether the charging indicator lamp on the driving recorder works.

(2) Check whether the power button is pressed to take effect. When the power button of general driving recorder is pressed, its work indicator will light up (the work indicator is usually blue).

(3) Reset the machine after pulling out the card, and press the power-on key to see if it is turned on.

(4) If the problem cannot be solved, please contact the local dealer.

2. When shooting video, it will automatically stop: The reason is that due to the huge amount of high-definition video data and the full memory, it is impossible to continue recording video.

Solution:

(1) Check whether the video loop function is set on the machine.

(2) Check the recording format of the machine and set the recording video format to save space as much as possible.

(3) Please use a high-speed TF card compatible with SDHC, which will be marked with C4 or C6.

3. Pause or frame skipping occurs during video playback: The main reason is that there is an error when storing data or the quality problem of the memory card.

Solution:

(1) Use the format function to format your SD card or TF card.

(2) Check whether your card is a water card (desktop card). If so, please replace it with the original golden shield card.

4. The recorded image is hazy or fuzzy. The main reason may be that the lens is not clean enough, or the front windshield is not clean enough.

Solution: Wipe the lens clean.

5. The image of the car black box is black or extremely bright when shooting, because the scene with large contrast affects the automatic exposure function of the machine.

Solution: Adjust the sensitivity function

6, cloudy or indoors, the image performance is not perfect.

Solution: Adjust the white balance

7. The reason of horizontal stripe interference in the image is that the wrong light source frequency is set.

Solution: Set 50HZ or 60HZ according to the local power supply frequency.

8. The video is very noisy, mainly due to the low power.

Solution: Record the tape recorder with enough power.

9. When playing video on the computer, the video is incoherent, which may be due to the incompatibility of the cards or the format of the player.

Solution:

(1) First, it is recommended to play it on a computer player.

(2) Replace the formatted high-speed card.

10, after receiving the car charger, the power indicator lights of the car charger and the driving recorder are on, but they are not turned on. The reason may be that the car charger does not match.

Solution: Replace the original car charger provided by the manufacturer!