What should I pay attention to when customizing furniture in the whole house?

10 whole house customization, these words can't be suppressed.

1. To buy customized furniture for the whole house, you must first determine the substrate of the board. The board is divided into particleboard (particleboard), medium density board, joinery board (ecological board) and solid board according to the base material. No matter what its name is, knowing the substrate and the manufacturer can avoid buying three-no or inferior plates.

The common plates in China have the following brands.

Bunny, Moganshan Lvshuihe (Jilin Forest Industry) Wanhua-Hexiangban, Lulu-Ousongban, Fuqing, Jingcun Artists, Qianshan, Kim, Patek, Pingan Tree, Peng Hong, Dawangye, Pengfei, Daya, etc.

Imported plate brands: Egger, Kronospan, Cleaf BERNECK, FINSA, Telubang, etc.

2. The choice of plate depends on the environmental protection level.

At present, there are three levels of formaldehyde emission written into national industry standards: ENF, EO and E 1.

ENF grade: formaldehyde emission

E0 grade: formaldehyde emission ≤ 0.05mg/m.

National standard E 1: formaldehyde release rate ≤ 0.1.24 mg/m.

F-star certification is a series of certifications about JAS wood products industry.

A series, the standard * * * is divided into four grades, and the standard system of free formaldehyde is divided into from low to high.

F★, F F F★★★★ Four grades.

F★: formaldehyde emission

F yellow★: formaldehyde emission ≤1.5 mg/L.

F F F★★: formaldehyde emission ≤ 0.5 mg/L.

F F F★★★: formaldehyde emission.

ENF grade is 202 1 1, a newly issued environmental protection standard for plate enterprises.

Quasi, commonly known as the "new national standard", is the highest environmental protection standard in the country, that is, the level of no aldehyde addition, which is also the most stringent environmental protection standard in the world at present; The environmental protection standard is higher than F4.

3. Look at the thickness of the plate. A quotation given by a store or manufacturer

Ask how thick the board is first. Typically, the thickness of the boards in the cabinet is

18mm, the back plate thickness is 5mm or 9mm, and the thickness of the cabinet is less than 18mm, so the budget will be relatively reduced, but the carrying capacity of the cabinet will be relatively small. It is recommended to select a plate with a thickness of18 mm.

4. Cabinet door materials. According to the material, it is divided into: density board, particleboard, ecological board, solid board and so on. According to the decorative materials, it is divided into: double facing, plastic absorption, PET, etc. You can choose suitable materials according to your own needs.

PS: The cupboard door must be made of high-density board or European pine board with straightener from one door to the top, which can effectively avoid the deformation of the cupboard door.

5. hardware Hardware is divided into basic hardware and functional hardware.

The basic hardware includes: connector, hinge, straightener, rebound device,

Clothes drying rod, cupboard door handle, etc. Functional hardware includes: trouser rack, basket, lamp belt, lifting clothes rack, etc. As far as quality is concerned, as long as it is the hardware produced by regular manufacturers, it is still relatively durable. If Qian Duoduo wants to pursue higher quality and comfort, it will use imported hardware.

6. Custom billing method for the whole house. There are three common charging methods:

1. Charge according to the expanded area.

2. Charge by projected area

3. Parcel billing.

Extended billing: all furniture plates are counted as one piece, with length x width = area, and the sum of all individual pieces' areas x unit price = total price. This calculation is conducive to customer drainage, because the unit price is very cheap and attractive. However, its shortcoming is like boiling a frog in warm water, which makes you fall in love with into the pit unconsciously. There is a charge for adding a partition to the wardrobe! Add a vertical board to the bookshelf and charge it! The more complex the functions and styles you want, the higher the price. The end result is that you dare not do the functions and styles you like, or you will spend more money on them.

Projection billing: width x height = cabinet area, and internal laminates and risers are no longer charged separately. What the internal structure of the wardrobe wants is simple and clear, so don't worry about whether it will exceed the budget.

Package billing: the customized furniture packages that merchants can give are basically profitable.

Yes, at first glance, the total price is too cheap. Do you know that?/You know what? Do you know that?/You know what? From Nanjing to Beijing, the things you buy can't be sold, and no one will do business at a loss. Low price is naturally low cost. Materials, workmanship, hardware and styles are definitely not what you like. You can add money if you want good things! Just like buying an apple. Bagged apples 10 yuan one bag. The big ones are exposed, and the small ones are bad. If you open the bags, you won't sell them. If the budget is really limited, you can accept the package customization. It's not impossible to buy. You must ask about materials, technology, hardware, installation and after-sales. Written into the contract, there is indeed a problem with convenience, and the rights and interests will be guaranteed in the later period.

7. Why are the quotation methods different? How to choose?

The quotation of customized furniture for the whole house is detailed and brief, and the price is high and low. First of all, it is determined by the different cost accounting of each merchant. On the premise of the same materials and technology, the cost of the exhibition hall of the head brand, the related design and the operating expenses of the sales staff determine that the price of the product is positioned at a high point. Secondly, due to different hardware brands and configurations, the final quotation is also different.

Among the quotations from many merchants, how to accurately and quickly screen out the quotations that meet their own needs?

Look at the budget, choose a few businesses whose quotations are close to their own budget, and be shortlisted.

It doesn't hurt to make a budget, and the merchants finally have a preferential margin.

Look at the details, mainly depending on the plate (brand, specification, environmental protection level) and hardware (warranty time, origin, all-inclusive or separate billing).

Third, see if it includes transportation and installation.

Finally, the most important and crucial point is to write the contract clearly.

It involves sheet metal, hardware, standard equipment, processing time and installation time. Try to write clearly if you can.