Linear slide rail dimensions Linear slide rail model specifications

Among them, the most common situation is applied to drawers. Drawers help us store some small things. I believe every family will have drawers, which are convenient and easy to use. So let’s take a look at the dimensions of linear slide rails and the model specifications of linear slide rails.

Introduction to the dimensions of linear slides

1. Dimensions and specifications of drawer slides

The slide rails of the drawer are fixed on a certain track for the other parts of the drawer. Guide rails with grooves or curves for moving parts.

The sizes of drawer slides are generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, and 24 inches. You can install slide rails of different sizes according to the size of your respective drawer models.

Drawer rails are divided into small rails, three-section rails, steel drawers, hidden drawers, molded drawers, etc. The high-end drawer rail system not only maximizes the use of cabinet space, but also ensures that everything can be stored easily. Take out, the diversified design of partition components in the drawer allows the things stored in the cabinet to be arranged neatly, conveniently and orderly. The choice of fully stretched rails makes the storage in the cabinet clear at a glance.

2. How to install the drawer slide rails

Now we will introduce to you how to install the three-section drawer slide rails.

1. First assemble the five panels of the drawer and screw on the screws. The drawer panel has a slot, and there are two small holes in the middle for installing the handle.

2. To install the drawer slide rails, you first need to disassemble the rails. The narrow ones are installed on the drawer side panels, and the wide ones are installed on the cabinet body. When installing, the slide rails should be flat under the drawer side panels and on the front. Flat drawer side front. Everyone should distinguish between before and after.

3. Install the cabinet. First screw on the white plastic holes on the side panel of the cabinet, and then install the wide rail removed above. Each slide rail is fixed with two small screws one in front and one behind. Both sides of the cabinet must be installed and fixed.

Model specifications of linear slide rails

There are many brands of linear slide rails. The common brands of linear slide rails currently on the market are:

Japan: THK, NSK, IKO, MISUMI

Taiwan region: AMT, ABBA, HIWIN, CPC

Swiss region: SCHNEEBERGER

Korea region: SBC

Mainland area: Nanjing Craftsmanship, Hanjiang Lead Screw, Kate

The linear guide rails of each brand have different models. The common linear guide models of each brand are:

THK Linear Guide Guide rail model specifications: HSR, SHS, RSR, HRW, SSR, SRS

NSK linear guide model specifications: LH/LS/LA/LY/LW/LE/LU/LL

IKO linear guide model specifications: LRX/LWE/LWH/LWL

AMT linear guide model specifications: MSA-E/LE/S/LS, MSB-E/TE/S/TS

< p>ABBA linear guide model specifications: BRH-A/AL/B/BL, BRS-B/BS

HIWIN linear guide model specifications: HGW-CA/HA, HGH-CA/HA, EGW- CA, EGH-CA,

CPC linear guide model specifications: MR-MN/ML, MR-WM/WL, AR-MS/MN/FS/FN, HR-MN/ML/FN/FL

SCHNEEBERGER linear guide model specifications: MRA/MRB/MRC/MRD/MRE, BMA/BMB/BMC/BMD/BME

SBC linear guide model specifications: SBG-FL/FLL /SL/SLL/FV/SV, SBS-SL/SLL/FV/SV

Nanjing Craft Linear Guide Model Specifications: GGB-AA/AAL/AB/ABLGGB-BA/BAL, GGC-BA/ BAK

Hanjiang linear guide model specifications: DA-AA/AB/CA/CB/AAL/ABL/CAL/CBL

Kate linear guide model specifications: LG-EA/FA, LG-AA/AN/HAA/HAN, LMW-AA, LGW-EA

Summary: This is the relevant information about linear slide rails. I hope that the editor’s efforts can help you. , if you still don’t understand anything, you can leave a message to the editor below, and we will answer it for you as soon as possible. Rilong Decoration Network will provide you with more complete, detailed, and updated information.