Traditional Culture Encyclopedia - Photography and portraiture - List of mobile phone external lens brands

List of mobile phone external lens brands

If the mobile phone is external, the best feeling is Sony Q series lens, which makes sense.

External lens, all rely on the phone's own camera, external lens is just an extension of some special effects.

External lenses, after all, the market is chaotic now, ranging from ten yuan to several thousand yuan. If you have money, it's good to be expensive.

If it's hand training, it doesn't matter. Just measure your wealth and needs.

Learning began at 12, and now it is listed as follows for your reference.

Ten-dollar lens, Lieqi? (2-4 Functions) Domestic products are exported and sold at home.

One hundred to three hundred, OREA? (8- 10 function) Domestic products are both exported and sold domestically.

More than 300, Lifetrons (2-4 functions) Swiss brand.

More than 500-800, EXO, Moment, Spiro, Coslo, Manfutu (2-3 functions) American brands.

1 1000, Sony, Kodak, DXO? Japanese and American brands

Of course, there are also many fake brands. Is it a brand standard, that is, is there a brand logo on the product and is there a complete package?

Due to limited financial resources, Manfutu, Keda and DXO have never played, and they can't tell.

In film and television, the lens has two fingers, one refers to the optical components used by film cameras and projectors to produce images, the other refers to the continuous picture taken from power on to power off, or the fragment between two editing points, also known as the lens.

One finger and two fingers are two completely different concepts. In order to distinguish, one refers to the optical lens and the other refers to the lens picture. According to the origin of lenses, mainly Japanese lenses and German lenses. Japanese lenses mainly have good color reproduction, while German lenses have a strong sense of layering. China's lens has gradually occupied a certain market in the market, mainly because the price is relatively low.

1.p lens

(1) Automatically position the lens, and the pupil focus has been adjusted. It is necessary to check whether the definition from the maximum magnification to the minimum magnification is consistent and clear.

(2) Check the coaxiality, that is, the images from the maximum magnification to the minimum magnification are taken at the same position, and cannot be offset or offset too much, which is regarded as defective, and the lens must be replaced again.

(3) The optical magnification is 0.7—4.5X, that is, 9 magnifications ranging from 0.7 to 4.5 times.

(4) Judging the clarity according to the imaging reflection of the correction block and the actual object.

2.e lens

(1) This lens is an ordinary industrial lens, and the pupil focal length needs to be adjusted manually. After the machine is installed, when the maximum magnification and the minimum magnification are manually adjusted, the image is equally clear. Those whose sharpness cannot be adjusted are regarded as defective products, and those with unstable factors such as jitter after adjustment are also regarded as defective products.

(2) Check the coaxiality, that is, the images from the maximum magnification to the minimum magnification are taken at the same position, and cannot be offset or offset too much, which is regarded as defective, and the lens must be replaced again.

(3) the optical magnification is 0.7-4.5 times. ..

(4) Explain the definition according to the imaging reflection of the calibration block and the actual object.

3.l lens

(1) This lens is an ordinary industrial lens, and the pupil focal length needs to be adjusted manually. After the machine is installed, manually adjust the maximum magnification and minimum magnification, and the image is also clear. Those whose sharpness cannot be adjusted are regarded as defective products, and those with unstable factors such as jitter after adjustment are also regarded as defective products.

(2) Check the coaxiality, that is, the images from the maximum magnification to the minimum magnification are taken at the same position, and cannot be offset or offset too much, which is regarded as defective, and the lens must be replaced again.

(3) the optical magnification is 0.7-4.5 times. ..

(4) Explain the definition according to the imaging reflection of the calibration block and the actual object.

4. Automatic zoom lens

(1) Automatic positioning, the pupil focus of the lens itself has been adjusted, and it is necessary to check whether the definition from the maximum magnification to the minimum magnification is consistent and clear.

(2) Check the coaxiality, that is, the images from the maximum magnification to the minimum magnification are taken at the same position, and cannot be offset or offset too much, which is regarded as defective, and the lens must be replaced again.

(3) the optical magnification is 0.7-4.5 times. ..

(4) Explain the definition according to the imaging reflection of the calibration block and the actual object.