How to set video blur on Canon SLR camera 750D?

1.: Caused by hand shake or using a shutter speed that is too low when shooting. When shooting, please hold the camera steady and check the shutter speed at that time. Be careful not to set it lower than the safe shutter speed. If the equipment you are using has anti-shake function, please turn on the anti-shake function. Use a tripod to stabilize the camera if necessary. 2: Caused by the ambient light being too dark.

2. Try the following settings: 1: Use the aperture to set the aperture to about F8; 2: Reduce the ISO to below 400; 3: Use a tripod to stabilize the camera. If there is a shutter cable, use the shutter cable. If there is no shutter cable, use the shutter cable. If using the shutter release, use a 10-second self-timer; 4: If you use screen manual focus, you can zoom in on the focus point 10 times to focus.

3. The specific operation is as follows: Turn on the power button of the Canon camera, and the LCD screen will light up. On the upper left side of the camera, you can see a menu button. Click to enter. On the first page of the settings interface, you can see the image quality options.

4.: Insufficient light. Shoot when there is sufficient light, so that you can use a higher shutter speed to avoid blurry photos; 2: The shutter speed is too low. When taking pictures when the light is not very good, you can increase the ISO sensitivity of the camera appropriately to increase the shutter speed, or you can use the built-in flash to fill in the light; 3: Blur caused by hand shake.

5. When taking photos with the small window of Canon 750D, the inside is blurry, but the photos taken are clear. The reason is: the diopter is not adjusted properly.