Ark needs to set the text font when editing a document with word. There are four kinds of italics in bold official script paper cutting below, among which italics.

1. Q: How can I set different headers for each page in WORD? How to make different chapters display different titles?

A: It is divided into several parts, and each part can have a different title. File-page setup-layout-header and footer-home page is different.

2. Q: How to make each chapter in word use a different header? Why can I only use one header now and change them all at once? Answer: In the Insert Delimiter, select Insert section break, and you can select continuous. Then, before changing the header of the next page, click the "Same as before" button, and any other changes will not affect the previous page. In short, section break made them independent. The "Same as before" button on the toolbar is displayed on the toolbar, but it appears as an icon. Move the cursor over it and the word "same as before" will be displayed.

3. Q: How do I merge two WORD documents? You need to write two files for different headers and then merge them. How to do it? A: In the header settings, select different parity pages/different options from before.

4. Q: How does WORD edit the header settings to realize the difference between odd pages and even pages? For example: a one-page dissertation of Zhejiang University, which is well set; Two pages: (title of each chapter), what's the skill of this? Answer: Insert the section separator, which is the same as the previous section setting, remove it, and then set a different parity page.

5. Q: How to make a WORD document have only the first page and no header or footer? Answer: Page Setup-Header and Footer, select a different homepage, then select the small arrow in the header of the homepage, format-border and shading, and select None. As long as you don't want the whole document to be in the page setup of view-header and footer, you can see a "as before" sign. If you don't choose, the settings before and after will be different.

6. Q: How to set the header from the third page? A: Insert section break at the end of the second page and delete the same section in the header format of the third page. If the first and second pages have headers, set them as text.

In the new document, click Menu-View-Footer-Insert Page Number-Page Number Format-Start Page Number is 0 and confirm;

Menu-File-Page Setup-Layout-Different Homepages, OK;

Place the cursor at the end of the first page, and confirm after menu-File-Page Setup-Layout-Different Homepages are applied to the insertion point. The difference between step 2 and step 3 is that step 2 is applied to the whole document, while step 3 is applied after the insertion point. In this way, after the first page is different twice, the page number starts from the third page and starts from 1, which is complete.

7. Q: A straight line automatically appears in the WORD header. What should I do? Answer: The format is changed from "Header" to "Clear Format", which is on the far left side of the format shortcut toolbar. Select the title text and arrow, and the format-border and shading-is set to select None.

8. Q: The header is generally-A: Follow the following steps:

● Select the text in the title, including the last arrow.

● Format-border and shading

● Select linearity as the double line.

In the preview, click the small box at the bottom left, and the previewed graphics will have double lines.

● Make sure that the top and bottom can be set by themselves. Click on the four small squares around the preview, and the title line can be in different positions.

9. Q: How to delete footnotes in Word? Delete the corresponding symbols in the text, the content can be deleted, but the final format is still there. What should I do? Answer: The steps are as follows: 1. Switch to normal view and select View-Footnote from the menu. At this point, the edit field of the endnote appears at the bottom. 2. Select "endnote separator" in the endnote drop-down menu, and a dash appears. Select and delete it. 3. Select "Endnote Continuation Delimiter" from the drop-down menu. This is a long horizontal line. Select and delete it. 4. Switch back to page view, and the endnotes and footnotes should be the same.

10. Q: Is there an automatic hyphenation function in Word? There are often words that are too long. It would be nice if you could set automatic hyphenation. Answer: Word is still very powerful in tools-language-word segmentation-automatic word segmentation and checking.

1 1. Q: How can I change traditional Chinese characters into simplified Chinese characters in a word document? A: Tools-Language-Simplified Chinese-Traditional Chinese Conversion

12. Q: How to fine-tune the WORD table line? The vertical lines of the WORD table cannot be aligned. Drag one of the lines with the mouse, and it will run far. What should I do if I want to fine-tune the vertical line of the table to align it up and down? A: Select the upper and lower cells, and then specify their widths to align them. You can press Alt at will to open the drawing with an adjustment coordinate line. Click to minimize the horizontal and vertical spacing. Open the drawing and set it in the drawing grid in the lower left corner to minimize the horizontal and vertical spacing.

13. Q: How to fine-tune the word table line? The vertical lines in my word table can't be aligned. Drag one of the lines with the mouse, and it will run far. I want to fine-tune the vertical lines of the table so that they are aligned up and down. What should I do? Answer: You can do this: ● Hold down the ctl key or shift, and you try.

Double-click the line to try it.

Open the drawing and set the grid (in the lower left corner). Minimize both horizontally and vertically, try it!

● press "Alt"

14. Q: How to eliminate the existing page breaks in word documents? Answer: the tool first-> Options-> View-> Format Label, select all, then you can see the page break, and just delete it.

15. Q: Can I change the size of my bid in Word? A: Format-Font

16. Q: How to automatically generate a table of contents in Word? A: use "format >"; > style and format "to edit the subtitle in the article, and then insert->; Indexes and directories

17. Q: Can the document structure diagram of Word be copied as a whole? The paper is going to write a table of contents, and I don't want to enter it according to the document structure diagram. Is there any way to copy and paste? Answer: If it can be generated automatically, insert the index directory.

18. Q: Is there any way to align the page numbers on the right when making the catalogue? For example: 1. 1 Title ............................... 1. 1.2 Title ............................... 2 Answer: Draw a table, then put all the page numbers in a grid on the right or in the middle, and then make the lines of the table disappear. It will be printed neatly.

19. Q: How do I convert all uppercase letters into lowercase letters in word? For example, a sentence that changes from all uppercase to all lowercase: format->; Change case-> lowercase letter

20. Q: There was a problem saving the disk. Symptoms include: the disk is full or there are too many open files to save, and it is useless to open a new window to save. How to solve it? Answer: Select all word documents, then copy them, and then close word. The computer prompts you that there is something on the sticker. Do you want to use it in other programs? Select Yes, then reopen word, paste and save it.

2 1. q: the form in WORD will be scattered as soon as it is copied and pasted into PPT. How to paste the table in WORD into PPT as it is? Answer: 1) A better way is to save the form as a WORD file separately, and then insert-> Object, select the file to be created, and then select the WORD file above and confirm; 2) It is also a better way to copy the form into excel first and then into PPT; 3) You can make a text box first and then paste it; 4) Copy and paste, but not in the text box in PPT; 5) copy the screen, make a picture, and then take it to PPT.

22. Q: Is there any way to copy PPT text into WORD? A: Just keep it as it is. Put it in. Rtf format.

23. Q: When writing in word, the spacing always changes, sometimes it automatically becomes very wide, and sometimes when entering the next line, the spacing on the previous line automatically becomes larger. Why? How to correct it? Answer: because of the function and format of automatic alignment->; You can choose paragraph-> alignment. There is also the function of allowing hyphenation. If it is an inspection, the situation you mentioned will not appear.

24. Q: After using WORD styles, such as title 1 and title 2, there is always a black square in front of these styles. Although it is invisible when printing, it always looks uncomfortable. Is there any way to stop it from being displayed? A: "View"->; "Show paragraph marks" and remove the check mark in front. In fact, this is very useful and can help you know which is the title paragraph.

25. Q: On the first page of the article, the author's contact information is necessary. The usual format is dash, and the following are contact information, financial support, etc. How to do this format? Is it to represent the footer? A: insert-footnotes and endnotes

26. Q: There are two columns of text, and one picture is particularly large. What should I do if I want to show it in the column? A: The contents that can be selected are arranged in double columns. Select other content and arrange it in a column.

27. Q: Why don't carriage return newlines appear in Word? A: Put the viewpoint-> Show checkmarks or tools for paragraph marks-> Options-> View-> paragraph marks

28. Q: Is there any way to replace the soft carriage return in WORD at one time? All the recognized words are soft input. Can I delete them all at once? Answer: find+replace, press ctrl+h; Soft carriage return seems to be L, with special characters.

29. Q: How to tick in WORD? Answer: draw a text box, write a tick in the text box, and then drag it over; Or insert the symbol "√" in WORD, then select "√" and select "□" in-"Format-"Chinese Format-"Encircled Characters-"

30. Q: Still no good. The copied frame font is windings, while the original one is Songti, which is quite different. Answer: according to the template, create a new professional fax with a box inside. Double-click the box and copy it.

3 1. Q: How to tick an English letter in Word? Answer: Insert the picture object transparently, and the content is a √.

32. Q: How can I display the status of the revised document in WORD? After the document is modified, there are many marks after the modification, but there is no "Show the final modification status" in the menu. How to adjust it? A: Tools-> Custom->; Command->; Category (tool)-> Order (revised)-> order; Drag "Revision" and so on to the toolbar.

33. Q: How can I merge multiple independent word documents into one document? My thesis is written according to chapters, but now the library has to submit the electronic version of the thesis, not the document. I found many options, but I can't seem to merge them. I can add content by selecting the Insert File function, but I can't insert the title in the document. Who has any suggestions? A: acrobat6 can directly print multiple documents into a pdf document. You can submit papers in pdf format. First, convert a word document into pdf format. Then, in the file menu of the pdf document menu, select it to open in pdf format and attach it.

34. Q: What should I do if I want to write an equation in Word? Answer: Insert-Object-Formula Editor equation. If there is no formula editor equation, you should install it from CD-ROM or Mathtype formula editor. Right-click and drag it out-insert-command-customize-the tool should be the other way around.

35. Q: If you want to represent a matrix in WORD, how do you draw the big matrix brackets? Answer: just install the formula editor mathtype ~:)

36. Q: How to install the formula editor of Word? A: Tools-Customize-Insert-Formula Editor, just drag it to the toolbar. Or after installing OFFICE, reinstall it and select Add Function. You will be prompted.

37. Q: What are the shortcut keys to call the formula editor in Word2000? A: Click Tools->; [Customize], click [Keyboard] at the bottom of the dialog box, select [Insert] in [Category], and select [Insert Equal] in the command to specify your shortcut key.

38. Q: Lines with formulas in WORD are often wider than lines with only words. How to change these lines to be as wide as those with only words? A: Paragraph spacing can be set to a fixed value. There will be a problem, such as setting it to 18 points, and some formula symbols (especially those with underlying labels) cannot be displayed completely. How to solve this problem? How to solve this problem needs to be considered.

39. Q: My document is full of formulas. What should I do? A: When there are many formulas, the best way to eliminate this problem is to save one every few formulas. This problem will occur if you type too many formulas in succession. When there is a problem:

● select all, ctrl+C.

Close all documents in WORD.

● Crucial: When the message appears, be sure to select "Yes".

● reopen the WORD editor.

, ctrl+v, paste

●ctrl+S, save.

40. Q: How to enter spaces in the formula editor of word? A: ctrl+shift+ space.

4 1. Q: How can I make all the formulas in word smaller? Please answer them one by one: in Mathtype formula editor: first, select define in Mathtype menu Size to define the required font size; Third, save it in Mathtype's menu preference to the equation preference file to store the defined font size file; Back to word: Select Format Equality: 1 from Mathtype menu) In MathType preference file, select the file just defined; 2) In the range, select the whole document. Finally, choose OK, that is, OK.

42. Q: How to pull out the formula editor in WORD? A: Tools-Customize-Command-Insert-Find the formula editor on the right and drag it up.

43. Q: How can I get rid of the formula in word or the gray bar that always appears at the top of the picture? I didn't have it before. I don't know how to get out. You look dizzy. . . . . A: Tools-> Options-> View-> Field shading, choose not to display, or display when selected, that's all.

44. Q: The whole paper uses a WORD document, which is too large to edit. If there are additions and deletions in one place, the layout of such a long document will become messy, especially for things like charts. I hope that the page of each chapter will automatically display its own chapter number and title. Can this be realized automatically in WORD? Answer: don't put a WORD document in the whole paper, chapter by chapter, and then each chapter can be treated separately even and odd.

45. Q: The papers are written by chapters. I want to combine them into one file and keep the original file format. Section break was inserted at the end of the file, but the format of some files changed after insertion. How to solve this problem? Answer: It is best to master the document, which is set in outline mode; By inserting the file, the format has changed a little.

46. Q: How to display line numbers in WORD? A: In the page setup, there is a line number option at the bottom of the panel options.

47. Q: How to insert a half space in Word? A: First of all, on the toolbar of word, click the button with double arrows to see the space that you couldn't see before, and then edit the size of this space, such as small five or small four.

48. Q: As long as you press Enter, or any operation that changes the cursor position, the previous line will become =. Has anyone encountered this problem? Answer: Is the automatic replacement set up? Let's look at automatic substitution in symbols!

49. Q: Can WORD be sorted by the first letter of the word? Answer A-Z: The contents in the table can be sorted by Pinyin, put into excel, sorted and returned.

50. Q: How to enter r 2 in word? Answer: Dial R2 first, then select 2 with the mouse, and press Ctrl, Shift and+at the same time.

5 1. Q: What happened when I found that all the spaces in Word were dots? Every time you enter a space, a dot will appear. How can I get rid of it? Will this space be printed? Answer: No printing. If you don't want to display it, just remove the front tick in the Tools-Options-View Format tab.

52. Q: How does word make two tables side by side? Every table I make is relatively small, but there are many tables. I want to arrange these two forms. What should I do? A: The Presidium will try a table for each column.

53. Q: Why does the typesetting of the WORD document change when changing machines? WORD documents arranged on one machine will change when opened on another machine? The page numbers are all wrong That's weird. A: The default page settings are different, or the version is different.

54. Q: The problem with inserting tables in Word is that the two lines before and after the same table are on different pages. How do you want to limit them to doing it on the same page? A: It may be easier to typeset by converting it into a frame or adding a text box.

55. Q: How to draw a coordinate map in word? What should I do if there is a coordinate map in word, but no text is added? Answer: Add text directly when drawing; In the drawing toolbar of word, the text looks for a suitable scheme around it, and the picture is placed at the bottom of the text.

56. Q: What if the WORD file has a password? A: Look for cracking software, such as advanced _ office _ 2000 _ password _ recovery _ pro _ v1.03, but it may not be easy to use.

57. Q: How to encrypt a word document? Answer: Open the document, save as-Tools-General Options-Open, change the password and save.

58. Q: How to convert a Word file into a postscript file? Answer: first convert it into pdf, then print it into a file, and generate ps through distiller.

59. Q: What if Word can't recognize the Chinese characters in origin? There are Chinese characters in the graphics made with origin, and copying them into word becomes a question mark. I have to use export to turn the graphics into jpg files to solve this problem. Is there a convenient solution? A: The font in ORIGIN was changed to Song Style or Imitation Song Style.

60. Q: How can I copy the chart in Origin into Word? Answer: Click Copy Page in the edit menu of origin and paste it into word.

6 1. Q: When you copy and paste the diagram of origin into word, there will always be a big blank. Is there any tool to remove this blank? There is also a big blank when drawing with the chart tool that comes with word. Can this be solved? A: Right-click the picture toolbar, and then click Cut.

62. Q: Why is the inserted picture always at the top of the page? I wanted to drag it down and put it somewhere else, but I automatically went to the top, but I couldn't drag it down. What should I do? A: Just change the properties of the picture.

63. Q: How can we ensure that an image is fixed at the back of one paragraph and in front of another, and its position will not change because of the deletion of the previous paragraph? A: Right-click the picture-> Format object->; Format-> embedded type

64. Q: How to convert drawings drawn by graphic tools in WORD into jpg? Answer: Save it in html format, and then look for it in the folder corresponding to the html file.

65. Q: What format is the clearest for inserting pictures into word? I have png and tif formats at hand, so copying and pasting them into word will be blurred. What is the clearest picture format for word? What methods (inserting pictures from files or copying and pasting directly) affect the clarity? A: Vector images such as EMF and EPS are the clearest, and resolution will not be lost due to scaling. Bitmap images such as JPEG and BMP are not.

66. Q: How to make a picture into words in WORD? Answer: It is realized when the number of columns is 1. Right-click the selected picture and set the picture format-layout-wrapping.

67. Q: How to insert a jpg file into a word file and make it smaller? After the jpg format picture is inserted into the word file, the file becomes huge. Is there any way to make it smaller? It's best to put it on a floppy disk. A: Two methods:

● Use photoshop to change the resolution of the picture. Of course, read it clearly and then insert the word.

●word has powerful compression function. For example, save the document as temp.doc to see if it is much smaller.

68. Q: How do you get the Matlab simulation diagram in word? Answer: Generally, it is modified directly in Matlab, then saved in jpg format and imported in word.

69. Q: How do I add text to a picture in WORD? I want to enter some explanatory text on the picture. A: Insert a text box with the layout set to "floating". There is an optional graphic in WORD's drawing tool. Find the brackets you want and draw them directly on the page. It can be moved and resized. Then move him to the edge of the text. One trick is to use CTRL+ arrows to fine-tune it. If you feel that you often need to edit these words, but you are afraid that the graphics are misplaced, you can enter the required words in a text box, remember to set the text box to be transparent and colorless (so that you can't see the text box), and then combine the text box with your brackets (or other symbols) into a graphic, which is foolproof.

70. Q: What should I do if I copy AUTOCAD drawings into WORD? A: There are several ways: First, you can edit CAD in WORD: set the background of CAD to white, then shrink the CAD window until the size of the graphic you want to copy is just enough to accommodate it, otherwise there is a big blank in WORD, then copy and select all the lines in the graphic, and right click. Paste into WORD. Second, convert it into wmf file first, specifically, shrink the window first, as shown above, and then press emport to select the line to save. In WORD, insert, graph, file, and find the file to insert.

7 1. Q: When I open an article in WORD, the original formulas are all red crosses. What should I do if the pictures in WORD become red crosses? A: There is basically no way to save it, only to re-illustrate it. According to Microsoft's technical support, the Red Cross is caused by insufficient resources. In other words, if the document you are editing is too large, the picture may not be imported due to resource problems, thus displaying a red cross. But the reality is that sometimes the edited document is not large, but there will still be a red cross. This may be because you have set up a quick save, which can be found in the options menu. This is determined by the document structure of WORD. When you set it to fast save, only the modified part is added to the end of the document every time you save it, without rewriting the document itself, so as to achieve the purpose of fast save. So you will see that a short document may actually be several megabytes in size. When the quick save is cancelled, the document length will be greatly reduced. Another way to reduce the possibility of a red cross is to delete "floating" from the properties of the picture. It may be difficult to edit, but it's really smart to avoid the Red Cross. Besides, once the Red Cross appears, there should be no way to restore it, so it can only be re-mapped.

Q: What happens if the news suddenly stabilizes there? A: If you reopen it, you will reply, or you can find the latest file in word's own template. Don't need to rewrite too much.

73. Q: How to solve the problem that word says the disk will not be saved when it is full?

A: Sometimes when you want to save a file, Word will pop up a dialog box saying that the disk space is full and you can't save the file, but there is still a lot of space on the disk. This is a very annoying thing. The most common reason for this message is that the Temp folder has reached the upper limit of the maximum number of files that can be contained in the folder. At this time, the solution is simple: right-click the disk with Windows installed in the Explorer, and click Properties in the shortcut menu that appears, and the Properties dialog box will appear. Select the Disk Cleanup button from the General tab, and the Disk Cleanup dialog box will appear. After disk cleaning, Windows will pop up a new dialog box. Select the Temporary File option in the File to Delete box, and then select OK. Windows will delete temporary files. To manually delete temporary files, please enter the temporary folder and delete any old temporary files (temporary files begin with a tilde and begin with a tilde. Tmp extension), return to Word, and try to save the file again. If the document cannot be saved correctly at this time, you can take the following steps:

(l) press Ctrl+A to select the whole document.

(2) Press Ctrl+C to copy the whole document into memory.

(3) Close the Word program. At this point, the system will prompt: "You put a lot of words in the clipboard. Do you want these texts to be available to other programs after quitting Word? .

(4) Select the "Yes" button.

(5) Reopen the Word program. (

6) Press Ctrl+V to paste the copied text into the new file. Note: When deleting a temporary file, a dialog box may appear indicating that the file in use cannot be deleted. This is because when Windows is running, you need to use some temporary files frequently. So when deleting temporary files manually, try to delete only a few files at first, and then empty the recycle bin on the desktop. Otherwise, you may not be able to delete all the selected files.