Basic knowledge of mobile lighting

1. What is the development history of mobile lighting tools?

What is the development history of mobile lighting tools? The development of mobile lighting tools can be traced back to the initial stage of human society-primitive society.

Since humans learned to drill wood for fire, mobile lighting has experienced the development process from fire, oil, candles to flashlights. Mobile lighting tools have undergone countless changes, from flashlights, oil lamps, candles and kerosene lamps to incandescent bulbs and xenon lamps, to dazzling LED flashlights.

Oil lamps have been improved many times. Oil for oil lamps changed from animal oil to vegetable oil, and was finally replaced by kerosene.

In order to prevent the wind from blowing out the fire, people put covers on the oil lamps, from the early paper covers to the later glass covers. This kind of oil lamp is not afraid of the wind and is convenient for outdoor mobile lighting. While using oil lamps for lighting, humans are still looking for other mobile lighting methods.

Around the 3rd century BC, people made candles with beeswax. /kloc-in the 0/8th century, candles made of paraffin appeared and began to be mass-produced by machines.

/kloc-more than 0/00 years ago, the British invented the gas lamp, which made a big step forward in human lighting. Torches, candles, oil lamps, gas lamps and other mobile lighting tools are inseparable from the fire, and all rely on the light emitted by the burning of substances to illuminate.

2. What are the characteristics of mobile lighting?

1, lighting performance: the lamp panel consists of four 500W Philips brand lamps with high efficiency and energy saving. The full lamp can rotate the control box at different angles up, down, left and right according to different requirements, so as to realize all-round lighting requirements; According to the needs of the site, each lamp holder can be made up and down separately, and the rotation can be adjusted at a large angle from left to right to realize 360-degree omni-directional lighting; Lamp holders can also be evenly distributed on the control box to illuminate in four directions; The overall lighting is far and near, with high brightness and wide range, and the life of Philips bulbs is long.

2. Irradiation range: 4 telescopic cylinders are selected for lifting adjustment mode, and the maximum height is 4. 5 meters, rotate the control box up and down to adjust the irradiation angle of the light beam, and the light coverage radius reaches 35-55 meters.

3. Lighting time: When the generator set is powered, it can work continuously for more than 13 hours when it is fully fueled at one time, and it can be illuminated for a long time by using 220V commercial power. 4. Convenient operation: it can be controlled by wireless remote control within 50m. The control box can rotate 270 degrees up and down, left and right, and each lamp (two when leaving the factory) can be turned on and off respectively. Electric or manual air valves are used to control the lifting of telescopic rods.

5. Applicable place: the control box, cylinder and generator set are integrated, and the bottom of the generator set is equipped with universal wheels and iron wheels, which can run on uneven roads and rails. The whole structure is made of high-quality imported metal materials, with compact structure and stable performance, which can ensure normal work in various harsh environments and climatic conditions, and the waterproof, water spraying and wind resistance levels are 8.

6. Customized for you: In order to meet the individual needs of customers, the standard configuration of this product cannot meet the work needs of users. According to your requirements, our company can adjust the number, power, floodlight or spotlight of the lamp holders on the control box, the lifting height of the telescopic gas pole and the configuration of the generator.

3. What are the performance characteristics of mobile lighting?

Performance characteristics of mobile lighting: 1, lighting performance: the lamp panel is composed of four 500W Philips brand lamps with high efficiency and energy saving. The whole lamp can rotate the control box at different angles according to different requirements to realize all-round lighting requirements; According to the needs of the site, each lamp holder can be made up and down separately, and the rotation can be adjusted at a large angle from left to right to realize 360-degree omni-directional lighting; Lamp holders can also be evenly distributed on the control box to illuminate in four directions; The overall lighting is far and near, with high brightness and wide range, and the life of Philips bulbs is long.

2. Irradiation range: 4 telescopic cylinders are selected for lifting adjustment mode, and the maximum height is 4. 5 meters, rotate the control box up and down to adjust the irradiation angle of the light beam, and the light coverage radius reaches 35-55 meters.

3. Lighting time: When the generator set is powered, it can work continuously for more than 13 hours when it is fully fueled at one time, and it can be illuminated for a long time by using 220V commercial power. 4. Convenient operation: it can be controlled by wireless remote control within 50m. The control box can rotate 270 degrees up and down, left and right, and each lamp (two when leaving the factory) can be turned on and off respectively. Electric or manual air valves are used to control the lifting of telescopic rods.

5. Applicable place: the control box, cylinder and generator set are integrated, and the bottom of the generator set is equipped with universal wheels and iron wheels, which can run on uneven roads and rails. The whole structure is made of high-quality imported metal materials, with compact structure and stable performance, which can ensure normal work in various harsh environments and climatic conditions, and the waterproof, water spraying and wind resistance levels are 8.

6. Customized for you: In order to meet the individual needs of customers, the standard configuration of this product cannot meet the work needs of users. According to your requirements, our company can adjust the number, power, floodlight or spotlight of the lamp holders on the control box, the lifting height of the telescopic gas pole and the configuration of the generator. .

4. Where did the historical development of mobile lighting originate?

The development of mobile lighting tools can be traced back to the initial stage of human society-primitive society.

Since humans learned to drill wood for fire, mobile lighting has experienced the development process from fire, oil, candles to flashlights. Mobile lighting tools have undergone numerous changes, from flashlights, oil lamps, candles and kerosene lamps to incandescent bulbs and xenon lamps, to various LED flashlights.

Oil lamps have been improved many times. Strong light flashlight oil lamp uses oil from animal oil to vegetable oil, and finally to kerosene.

In order to prevent the wind from blowing out the fire, people put covers on the oil lamps, from the early paper covers to the later glass covers. This kind of oil lamp is not afraid of the wind and is convenient for outdoor mobile lighting. While the LED flashlight is illuminated by the oil lamp, human beings are still looking for other mobile lighting methods.

Around the 3rd century BC, people made candles with beeswax. /kloc-in the 0/8th century, candles made of paraffin appeared and began to be mass-produced by machines.

/kloc-more than 0/00 years ago, the British invented the gas lamp, which made a big step forward in human lighting. Torches, candles, oil lamps, gas lamps and other mobile lighting tools are inseparable from the fire, and all rely on the light emitted by the burning of substances to illuminate.

/kloc-at the end of 0/9, Edison invented the electric light, rewriting the history of human lighting, and mankind entered the era of electric light. Explosion-proof flashlight

5. What are the safety requirements for mobile lighting during construction?

GB, if it is IEC, you can find the corresponding IEC standard code and standard name GB 7000 in these standard descriptions.

1-2007 Luminaires Part 1: General requirements and tests (IDIEC 60598-1:2003); GB 7000 .2-2008 Lamps Part 2-22: Emergency lighting with special requirements GB 7000.

3- 1996 safety requirements for portable lamps and lanterns used in gardens GB 7000. 4-2007 lamps Part 2- 10: Portable lamps for children with special requirements (GB 7000).

5-2005 Safety requirements for road and street lighting (IDIEC 60598-2-3: 2002); GB 7000 .6-2008 Lamps Part 2-6: Lamps with special requirements with built-in tungsten lamp transformer or converter GB 7000.

Safety requirements for floodlights GB 7000. 9-2008 Luminaires Part 2-20: Particular requirements for light strings.

20 1-2008 lamps part 2-1: fixed general lamps with special requirements (IDT iec 60598-2-1:1979+a1:1987) GB 7000 .202-2008 Lamps Part 2-2: Embedded Lamps with Special Requirements (IDIEC 60598-2-1:1997); GB 7000 .

204-2008 Luminaires Part 2-4: Particular requirements for portable universal luminaires GB 7000. 207-2008 Luminaires-Part 2-7: Particular requirements-Portable lamps for courtyard use GB 7000.

208-2008 lamps Part 2-8: Particular requirements for portable lamps (GB 7000). 2 1 1-2008 lamps Part 2-1 1: aquarium lamps with special requirements GB 7000.

2 12-2008 Luminaires Part 2- 12: Power sockets are equipped with night lights with special requirements (GB 7000). 2 13-2008 lamps Part 2- 13: Special requirements for embedded lamps on the ground (GB 7000).

2 17-2008 lamps part 2- 17: special requirements for stage lighting, television, film and photography places (indoor and outdoor) lamps GB 7000. 2 18-2008 Lamps Part 2- 18: Lamps for swimming pools and similar places with special requirements GB 7000.

2 19-2008 Luminaires Part 2: Ventilation luminaires with special requirements.