How to make moving objects clear and static background blurred when taking pictures?

This can be achieved by the following methods:

First, find a suitable location and set up the equipment.

It's best to find a place where the crowd is not very dense, but it flows quickly. Set up the equipment, connect the cable release device and install the neodymium mirror.

Second, the camera debugging

Because you want to use the slow door, you must switch to the S or M file. You can adjust the shutter to 10-30 seconds according to the actual situation. Because you don't need too shallow depth of field, just set the aperture to F8 or above. The longer the shutter time, the faster people walk and the more obvious the trajectory will be.

Third, repeated testing.

It is difficult to take a good photo at a time when taking a slow door during the day. You can try several more photos at10s,15s, 20s, etc. Repeated shooting, and finally chose the right one.

Fourth, portrait posing.

As mentioned at the beginning, if you shoot a portrait in this situation, you can show a feeling of sadness and time passing. So you can pose as a portrait. Please note that the model must not move, keep an action until the photo is taken, so that the model can be high-definition and the crowd can flow.

Extended data:

Focus-chasing photography, also known as panning, is a photography technique that uses a specific slow shutter. The effect of highlighting the theme in a fuzzy background is achieved by tracking the target trajectory almost parallel to the target object at the same speed, which will make the photo look very dynamic and have a strong visual impact.

1, the so-called low-speed shutter, generally refers to the shutter speed of 1/60s and below. Of course, it depends on the moving speed of the subject. If it is a high-speed train,1125s is also a low-speed shutter.

2. At the beginning of shooting, start shooting from a small slow-moving object, and then shoot a fast-moving object after finding the feeling.

3, shooting mode: shutter priority, sensitivity 100, sensitivity is set according to the actual situation.

4. It is recommended to shoot with M-stop after proficiency, because if the shutter takes precedence, the aperture is automatic, which will affect the depth of field, and M-stop can accurately control the parameters. If the lens aperture is not small enough and the shutter speed is not slow enough, add a reducing lens.