Traditional Culture Encyclopedia - Photography and portraiture - The generic host process of win32 service encountered a problem and needs to be shut down. We apologize for the inconvenience caused.

The generic host process of win32 service encountered a problem and needs to be shut down. We apologize for the inconvenience caused.

To solve the problems encountered by the general host process of Win32 service, it needs to be shut down.

Solve the problem that the general host process of WINXP system pops up after booting and needs to be closed!

Generally, there are three situations in which the above errors will occur.

1. This is a virus. When the general host process of Win32 service is opened, you will be prompted that there is a problem with the process.

Shut down the ""remote RR oceaudrecall(RPC) service unexpectedly, and then automatically restart the computer. Generally speaking, the virus will create a msblast.exe key value in the registry HKEY _ local _ machine \ software \ Microsoft \ Windows \ currentversion \ run, and will also place a Trojan horse in msblast.exe in the directory c:\windows\system32. The solution is as follows:

RPC vulnerability

Detailed description:

Recently, it has been found that some RPC's improper handling of malformed messages when using TCP/IP protocol to process information exchange has created a security loophole. The vulnerability affects the DCOM interface using RPC, which is used to process DCOM object activation requests (such as UNC paths) sent by client computers to the server. If an attacker successfully exploits this vulnerability, he will gain local system privileges and be able to run arbitrary commands on the system, such as installing programs, viewing or changing, deleting data or establishing an account with system administrator privileges.

An attack phenomenon that has been discovered:

The attacker creates a key named "msupdate" in the user registry HKEY _ local _ machine \ software \ Microsoft \ Windows \ current version \ running, and the key value is generally msblast.exeC:\windows\system32. A Trojan horse program from msblast.exe will be placed in this directory.

In addition, the attacker will restart and display an error message, such as "The general host process of Win32 service needs to be shut down due to a problem" and "The remote RR OceadureCall (RPC) service terminated unexpectedly and Windows must be restarted immediately".

It is suggested to download the corresponding patch from/security/security _ bulletins/ms03-026.asp. If it has been attacked, it is suggested to unplug the network cable first, end the msblast.exe process in the task manager, clear the corresponding entries in the registry, delete the Trojan horse program under system32, and finally patch it.

The second situation is that after the virus is eliminated, such a problem still occurs. In general, the registration information of IE components in the registry will be destroyed. The following methods can be used to solve this problem:

1。 Open the Run window in the Start menu, enter "regsvr32 actxprxy.dll" in it, and then "OK". Then an information dialog box "DLLRegisterserver in actxprxy.dll succeeded" will appear, and click OK again.

2 Open the Run window again and enter "REGSVR32 shdocvw.dll".

3 Open the Run window again and enter "REGSVR32 oleaut32.dll".

4 Open the Run window again and enter "REGSVR32 actxprxy.dll".

5 Open the Run window again and enter "REGSVR32 mshtml.dll".

6 Open the Run window again and enter "REGSVR32 msjava.dll".

7 Open the Run window again and enter "REGSVR32 browseui.dll".

8 Open the Run window again and enter "REGSVR32 urlmon.dll".

If the virus problem is eliminated, the general problem can be solved by completing the registration of the above IE component.

3. If the computer has a printer, it may be because the printer driver is not installed correctly, which will also cause this error. The solution is as follows:

Reinstall the printer driver.

Generally speaking, after the above three steps, the problem can be completely solved.

How to uninstall Tcp/IP protocol under xp

[This part has been hidden, and you have replied. The following is hidden content]

Under xp, unlike "kiss me to death", the ip protocol can delete and reinstall, and the uninstall button is always gray. Many netizens suggested unplugging the network card to delete the protocol, and disassembling the chassis was very troublesome. In fact, there is a very simple method:

Start-Run-Command-Type

netsh int ip reset c:\resetlog.txt

You must specify Resetlog.txt.

The result after running is the same as that of deleting and reinstalling TCP/IP protocol.

How to restore the floating bar of input method!

When you want to type, you find that the input method icon in the "lower right corner" is missing. Why? Maybe a rookie intentionally or unintentionally played with the input method settings and canceled the hook in front of "Enable the indicator on the taskbar". Of course, it's not entirely the rookie's fault. I have encountered many systems that are not checked by default. If a person is not careful, he will ... want to go back on his word and have no choice!

Win98 can also solve the problem of the control panel, but this is not good for Win2000/XP, because the control panel has no input method at all! I also read a lot of discussions on this issue on the Internet, but none of them satisfied me. Today, I'm going to show my secret trick, which may solve the pain of all beings: the tray icon for managing input method switching should also be a program, right? who is it? Where is it? Can you take it out? Over and over again, I finally understand that it is internat.exe, located under windows\system32. Double-click Run, and an exciting icon will immediately appear in the lower right corner. Then right-click the input method icon \ Properties \ and select "Enable indicator on taskbar". This will not only cure the symptoms, but also cure the root cause-the lost input method icon will reappear after booting!

(Copy the internat.exe in this folder to windows\system32, run it, and then check the setting of "Enable indicator on taskbar").

For WINDOWS XP system, just click "Start"-"Run", and then enter ctfmon in the open bar. After restarting the system, you will find that the input method icon reappears, and all installed input methods will be displayed, but you can't switch between different input languages with the keyboard.

The solution is to right-click the input method icon, click Settings, Key Settings and Change Keyorder buttons, and then select the check boxes for switching input language and keyboard layout. Finally, set left-hand ALT or right-hand ALT according to personal habits, and click OK button continuously to exit.

Click Advanced in Text Service and check before enabling Advanced Text Service.

What should I do if the rundll32 file is deleted by antivirus software?

Recovery method:

Put the system installation disk into the CD-ROM drive.

Then open a command prompt,

And enter "expand f: \ i386 \ rundll32.ex _ c: \ windows \ rundll32.exe",

Where "F:\" is the letter of the optical drive,

Just change it according to your own optical drive.

Error installing game or software (-5009: 0x8007007e).

First of all, this problem is only related to the file system format of the system partition. This problem should be the cause of conflict with NTFS file system during installation. I'm afraid the system partitioned in NTFS format can't be installed after startup.

There are two solutions.

1. After reformatting the system disk and changing its NTFS partition to FAT32, reinstall all system software and applications.

2. If you have a friend who successfully installed the game and is playing the game, directly copy the installation directory of Giant Company that can run normally to your own hard disk partition and partition it with FAT32.

I'm just looking for a friend to copy the entire installation directory installed by the giant to other FAT32 partitions on my machine, and it can run OK completely.

When the computer starts to verify DMI pool data.

DMI is the abbreviation of English word Desktop Management Interface, that is, desktop management interface, which contains configuration information about system hardware. Every time the computer starts, DMI data will be checked. If the data is wrong or the hardware changes, the machine will be tested and the tested data will be written into the BIOS chip for storage. So if we disable the refresh function of the BI OS chip in the BIOS settings, or disable the refresh function of the BIOS chip by using the jumper on the motherboard, then the DMI data of this machine will not be updated. If you change the hardware configuration, the machine will still work according to the configuration of the old system when running WINDOWS system. This will not give full play to the performance of the newly added hardware, and sometimes there will be failures of one kind or another.

If we see the above information when we start the computer, and the system stops for a long time or is in a dead state, it is generally difficult to deal with such failures of the machine. Because it can't be like the failure after entering the system, we can check the system log and other files for analysis. However, according to the process principle analysis of PC startup, there are generally the following possible situations in which this message appears:

1. Hardware changes

When the hardware configuration of the host changes, but we use the POST function, the system will not recognize the newly added hardware and will work according to the old configuration. At this time, it can be powered on after starting, but there will be no "beep" sound when starting normally, and there will be no image display on the display, only the sound of the fan rotating.

Another reason is that the newly added hardware is not compatible, which leads to the above situation.

2.BIOS settings change

When BIOS is set incorrectly, such as memory reading and writing parameters, hard disk mode, onboard sound card and integrated sound card, etc. , which will cause it to fail to start normally.

3. Hard disk cable connection error

This situation includes poor contact of hard disk data cable, too many data transmission errors caused by poor quality of data cable, wrong connection of data cable (the connection between motherboard and hard disk is reversed), wrong jumper between master and slave hard disks, and wrong setting of hard disk capacity or mode.

4. The contents of the main boot area of the hard disk are destroyed.

When the contents of the main boot area of the hard disk are rewritten by other programs or destroyed by viruses, or the partition table of the hard disk is emptied or artificially set to a logical lock state, it will crash at this time.

For the damaged boot program in the main boot area of the hard disk, we can use the Fdisk/MBR command to repair it, or use the disk editing function of KV3000 to find out whether the other 62 sectors with 0 tracks and 0 faces have backup boot programs and restore them to the 0 tracks, 0 faces and 0 faces.

It is troublesome to destroy the partition table. If only the partition table has no "80" sign or multiple "80" signs or no "55AA" sign, we only need to use the disk editing function of KV3000 for manual repair. If it is a logical lock, you need to make a special disk to unlock it. If the partition table is completely destroyed or encrypted, then we can only repartition.

5. The hard disk is faulty

Now the hard disk capacity is getting bigger and faster, but the quality of the hard disk seems to be getting worse and worse. Up to now, there are hundreds of meters of second-hand hard disks produced by 1994 and 1995 in the market. But now, just bought a new hard disk, it will break down or lose data inexplicably in a few days, or the "Mao Mao" strikes. The above situation also occurs when the hard disk hardware fails. This kind of hard disk can identify the hard disk in CMOS, and the disk identification is very smooth, but it just can't enter the system and can't be formatted normally.

6. There is something wrong with the motherboard

The main problem related to the motherboard is the hard disk controller of the motherboard, which causes unstable data transmission and high error rate.

Damage caused by overclocking

If it is overclocked, there will be a crash when you open the hard disk. At this time, we'd better track the displayed CPU frequency during the self-check, and then open the chassis to check the actual CPU frequency to see if they are the same. Especially after PIV, the CPU is highly integrated. If it is overclocked, it is very likely that the electrons inside the CPU will be excessively attenuated in a short time, resulting in the CPU being scrapped in a short time.

Solution:

1. Restore the state before hardware replacement and check whether the system can be started normally.

2. Check whether all cables or expansion cards are connected correctly.

3. Try to reconfigure PNP/PCI Configuration and Reset Configuration Data in the BIOS. You can also set it to "Enabled" by using BIOS options, such as "Force Update of ESCD", and then save and exit. If it can't start, try setting it to Disabled again.

4. For information about CMOS jumper and clearing CMOS, please refer to the motherboard manual. Please note: When clearing CMOS settings, you must unplug the host power cord or set the host power switch to off or 0.

5. Disconnect the hard disk cable, including the CD-ROM drive or other IDE devices, then enter the BIOS settings, select floppy disk as the startup sequence, press F 10 to save and exit, and then put the bootable system disk in the floppy disk drive to check whether the system can be started normally.

6. After clearing the CMOS settings, set the "PNP/PCI Configuration" option in the CMOS settings to "Enabled" and restart the computer again to update the set DMI data, which is also called forcibly updating the ESCD data.

7. If the host can be started by floppy disk, but not by hard disk, this situation may be that the data in the main boot area of hard disk is destroyed. At this time, you can use partition software to repair the program code of the main boot area, for example, after starting the computer with a floppy disk, use the FDISK/MBR command to repair the main boot area. You can also download a special hard disk analysis tool program from the website of the corresponding hard disk manufacturer to check the specific failure of your hard disk.

8. If the fault cannot be eliminated after the above settings, the IDE interface problem of the motherboard or hard disk should be considered at this time, and it can be solved by replacement.

How to solve the problem that IE window becomes smaller?

A friend asked: when IE is opened, there is only a small straight bar with buttons to maximize, minimize and close. It's the same whether it's off or on.

At this time, you only need to close ie as much as possible, and then open it, and you will find that it is the normal window of IE now.

Q: The above problem has been solved, but is it the same problem to open a new window that pops up from other links?

For this problem, we just need to maximize the ie window and then restore it downward. Point the mouse at the border of the column, and an up-and-down arrow symbol will appear. Adjust the ie window size until it fits, and then maximize it and restore it downward.

How to make the administrator appear in the welcome interface

Run regedit to find [HKEY_LOCAL_MACHINE] and directly search for userlist. Create a new DWORD key named (administrator) on the right. Just modify its value ("1" is displayed in the welcome interface. "0" is not displayed) The home edition is invalid.

Xp installation problem solving

Whether you like it or hate it, Microsoft's latest generation operating system Windows XP was released as scheduled with Bill Gates' childish smile. Whether it is good or bad, let time tell, but in the face of the temptation of XP, I believe more and more friends want to taste the freshness. Because Windows XP has stricter requirements on the operating environment of software and hardware than the previous operating system, many friends will always encounter various problems when installing. Let me introduce you to the problems and solutions that you often encounter when installing Windows XP. I hope it will help you.

Which version should I choose for Windows XP Home Edition and Professional Edition?

Windows XP Home is a home-based operating system that supports digital photography, music, computer games and Internet functions, providing a simple and easy-to-use environment for home users.

Windows XP Professional: It is a commercial operating system, which strengthens the integration ability with Windows servers and provides stricter security.

How to restore a system that has been upgraded to Windows XP to its original operating environment?

(1) If you upgrade directly from Windows98/98SE/ME to Windows XP operating system, you can run [Control Panel]/[Add/Remove Programs]/[Uninstall Windows XP] and you can revert to the previous version of Windows.

Note: If you run any of the following operations after the upgrade, you cannot revert to the previous system. A. convert the disk partition format into NTFS;; B, run the "disk cleaning" tool;

(2) If you are upgrading from WinNT/2000 operating system to Windows XP: Because their kernels are the same, it is a one-way step. In other words, when your system has been upgraded to Windows XP, you can't restore to the original operating system, so you have to reinstall it, so please consider whether to upgrade directly before upgrading.

Suggestion: If you still can't decide whether to finally choose Windows XP, then you'd better back up your original system, or install Windows XP on different partitions or hard disks by multiple booting. This can prevent the upgrade from failing due to the compatibility of software and hardware, resulting in data loss.

What should I pay attention to before installing Windows XP? (1) No matter whether you use a desktop PC or a notebook computer, please consult your PC manufacturer about matters needing attention during installation or upgrade, or the collocation problems after installation. Some manufacturers will take this opportunity to introduce new BIOS to support the new functional specifications of Windows XP. (2) Confirm in advance whether the peripheral device has an updated driver or matches with Windows XP. Note: Will the manufacturer tell you whether Windows XP has a driver for this peripheral? Will there be any problems during automatic detection? Does the manufacturer have a plan to update the driver? Information such as whether you can continue to use the original Windows driver in Windows XP. You can insert the Windows XP installation CD, run setup.exe in the root directory, and select [Check system compatibility]/[Automatically check my system]. The system will automatically check your hardware and software and report all potential conflicts. In addition, you can /hcl/ to confirm whether your peripheral equipment meets the Windows XP hardware compatibility test specification. (3) It is recommended that you do not overclock your CPU. (4) Turn off the virus detection function of BIOS and the power management system. Turn off virus detection method: virus warning in BIOS function setting is set to disabled. (5) Turn off the power management system: Please set the power management to disabled in the power management settings. (6) If the KeyPro (protection card) is installed, please remove it and put it back after installation. (7) It is best to scan the virus before running the installation program. (8) Before running the installation program, run ScanDisk or Chkdsk to check whether there are bad sectors or tracks. (9) If you have any hardware or software problems, please solve them before installing the Chinese version of Windows XP. (10) Back up Autoexec.bat and Config.sys to a floppy disk. (1 1) Delete all unnecessary programs in Config.sys and Autoexec.bat files. These programs include undelete programs, antivirus software, startup configuration programs or any disk tools. (12) Set the BIOS to the load setting default value or load the BIOS default value. (13) Remove unnecessary hardware devices (such as sound cards, MPEG cards or other special adapter cards) during installation.

How to install Windows 9x/NT/2000/XP on the same computer?

If Windows 9x, Windows NT, Windows 2000 and Windows XP can be installed on one machine at the same time, it must be considered that the file format must be FAT 16, FAT32 or NTFS.

(1)Windows 98 or Windows Millennium coexist with Windows XP: a. The file format of the startup disk must be FAT 16 or FAT32, not NTFS;; The reason is that Win98/Me does not support NTFS file format. B the installation sequence is to install Win98/Me first, and then run the installation program of WinXP directly from Win98/Me operating system, which will automatically form a dual boot startup screen.

(2)Windows NT 4.0 or Windows 2000 coexists with Windows XP: a. The file format of the startup disk must be FAT 16 or NTFS, not FAT32;; The reason is that Windows NT does not support the file format of FAT32. (Note: Windows 2000 can be FAT32). B. If the installation sequence is to install Windows NT 4.0 or Windows 2000 first, and then run the installation program of Windows XP directly from Windows NT 4.0 or Windows 2000 operating system, a dual boot screen will be automatically formed. (Please note that Windows NT must be upgraded to Service Pack 5 or later).

(3)Windows 98 or Windows Millennium, Windows NT 4.0 or Windows 2000 and Windows XP coexist: a. The file format of the startup disk must be FAT 16, not FAT32 and NTFS;; Because Windows 98 or Windows Millennium does not support NTFS, and Windows NT does not support FAT32. B. The installation sequence is to install Windows 98 or Windows Millennium first, and then run Windows NT 4.0 or Windows 2000 installer directly from Windows 98 or Windows Millennium operating system (note: please upgrade to SP5 or above after Windows NT). However, if you run the installation program of Windows XP under Windows NT 4.0 or Windows 2000 operating system, it will automatically form a triple boot screen.

How to set the fax function of Windows XP? (1) Open [Add/Remove Programs] in [Control Panel]. (2) Click [Add/Remove Windows Components]. In [Windows Components], select the [Fax Service] check box and follow the instructions on the screen. (3) Start the fax component: click [Start], point to [All Programs], point to [Accessories] and [Communication], and then click [Fax Control Panel].

If the hardware or BIOS does not conform to the ACPI specification of Windows XP, what problems will occur during installation?

When installing Windows XP, if the screen stays on the Windows XP startup screen after restarting the computer for the first time, the installation program cannot be completed. I suggest you contact the motherboard manufacturer to update your BIOS. If you can't update the Bios immediately, you can enter the Bios menu and select Disable "ACPI" in the BIOS power management settings. And press F5 when re-running windows XP installation, and select standard PC from the options that appear to complete windows XP installation. However, after installation, you will not be able to use the functions of ACPI.

How to use Ghost to quickly install Windows XP on multiple computers with the same hardware devices?

If your company has multiple computers with the same hardware equipment, you want to use image files made by products such as "Symantec Ghost" to quickly install Windows XP. After installing these computers, you can use the "SYSPREP" tool to modify the [security identification number (SID)] of the local computer to make it a special identification number of each computer.

A. operating steps: (1) please use WINZIP to extract the SysPrep tool (install the CD in Windows XP, the path is support\tools\deploy.cab). (2) Prepare to copy the master installation: first install Windows XP Professional on the host, and you can choose to install and customize Microsoft Office, Internet Explorer favorites and other applications. (3) Run Sysprep.exe. Note: Make sure that the files of Sysprep.exe and Setupcl.exe are in the %systemdrive%\Sysprep folder on the local hard disk, or in the disk inserted when the Windows startup menu appears. Sysprep will not work if Setupcl.exe and Sysprep.exe are not in the same directory. (4) Select [MiniSetup] and [PNP] in the logo, and then select [Reinstall]. In the shutdown item, you can choose to restart the computer or shut it down directly. (5) If the computer conforms to ACPI, it will automatically shut down. Otherwise, a dialog box will appear indicating that you can safely shut down your computer now. (6) After the computer is turned off, you can run the GHOST program to make Windows XP that has already run SysPrep into a mirror file.

B. When the hard disk on which Windows XP is installed is copied by Ghost and installed in the computer, when the user turns on the computer, the following situations will occur: (1) Plug and play detection-it takes about 3 minutes; (2) Please explain the user's name and organization; (3) Please join a domain or workgroup; (4) Please specify the regional option information; (5) Please specify TAPI information; (6) Please explain the network communication protocols and services to be installed; (7) Please delete the local Sysprep folder containing Sysprep.inf and Sysprep.inf in %systemdrive%.

C. Note: (1) has been tested in the machine under test first, and then the necessary deployment is made according to the actual environment. (2) To use SysPrep in the process of disk replication, the following requirements must be observed:

The Hardware Abstraction Layer (HAL) of the master installation and the target computer must be compatible. For example, HAL APIC is compatible with Hal MP (multiprocessor system), while Hal APIC (programmable interrupt controller) is not compatible with Hal APIC or Hal MP.

B the large storage controller (IDE or SCSI) between the reference computer and the target computer must be the same. Plug and play devices such as modems, sound cards, network cards and video cards are not necessarily the same. However, before running Sysprep, device drivers that are not in Drivers.cab should be put into the main installation. Or let the uninstalled driver be valid when the destination computer runs for the first time, so that plug and play can be detected and the driver installation process can be completed.

C the hard disk space of the target computer must be at least the same size as the main installation hard disk. If the destination computer's hard disk is large, this difference will not be included in the main disk partition. However, if it is an NTFS file system format, you can use the ExtendOemPartition project in the Sysprep.inf file to extend the primary disk partition.

D.[ If the BIOS versions of the reference computer and the target computer are different, you should first test the handler to determine whether it is successful. When using Sysprep to run disk copy, Sysprep will modify the [Security ID (SID)] of the local computer to make it a unique ID for each computer.

What should I do if I can't install Windows XP through the boot CD?

For this problem, you can make a windows XP startup disk and then install Windows XP. Please follow the following steps to make a Windows XP startup disk: First, please prepare six blank 1.44MB floppy disks, and then download the relevant version of the simplified Chinese production file from the Microsoft website. Run the file directly after downloading, and put the blank disk into the floppy drive according to the instructions.

How to solve the problem that some graphics cards of old chips (such as S3) are prone to static electricity when scrolling on the Windows XP platform? In this case, please restart into Windows XP and handle it as follows: Select Start/All Programs/Control Panel, then double-click the Display icon, and select Settings/Advanced/Troubleshooting in the panel that appears to set the Hardware Acceleration function from the maximum to none. Note: In order to completely solve this problem, you'd better download or update the driver and BIOS from relevant websites.

For example, windows xp suddenly loses power when installing office xp, and then word can't be used. Uninstall office xp and reinstall it. Prompt: "The C:\WINDOWS\Installer file exists and cannot be installed. Please delete this file or end the installation". I can't find this file at all under C:\windows. How to install office xp?

A: Yes. /? Id=29030 1 Download windows installation cleaner. After installing this tool, you can clean up the residual office xp information in the system and reinstall it after completion (many installation problems can be solved by referring to this problem).