2022 electrician personal annual summary model essay 1000 words.

Today's social work is inseparable from various documents and articles. This is actually because we usually read too few model essays before writing. Model essay can help us solve the problem of official document writing. What is the writing format of the model essay? We have collected and sorted out the "Personal Annual Summary of Electricians" for reference only. Let's have a look.

The electrician's personal annual summary model essay 1 According to the key typesetting requirements of the company's trade union work for half a year, combined with the actual situation of the substation work area. Under the leadership of the company's trade union and the party and government leaders in the substation work area, the trade union has done the following work:

First, focus on the company's central work and implement the spirit of the workers' congress

Immediately after the second workers' congress of xx, we organized all employees in the work area to collectively study the general manager's work report and the trade union's work report, and the workers' representatives held group discussions, so that all employees could further understand the production and operation tasks faced by the company in the first year of the Eleventh Five-Year Plan. And inform the staff of the response to the proposal, and everyone expressed great satisfaction.

Safety in production is the premise of enterprise development and the top priority of our work.

At the beginning of the year, we used the free time of spring inspection to organize employees to carry out skills and safety training. Conduct centralized training and assessment of safety regulations, operating procedures and rules and regulations, and hire experts in battery and switch specialty to train operators in business knowledge. Comrades who have passed the examination will be informed and praised in the briefing of the work area, and employees whose examination results do not meet the requirements will be trained to meet the standards, which will comprehensively improve the safety awareness and skills of employees in operating positions. Through these training and assessment work, the safety production in the work area has been improved, and zero errors and violations have been realized in the work area in the first half of the year.

After the spring inspection began, the labor supervision and inspection team in the work area conducted irregular inspections on the distribution and use of labor protection and protective articles at all stations and operating points in the work area, and the utilization rate reached 100%, with satisfactory results. In the process of inspection, we are also glad to see that the safety awareness and self-protection ability of employees have been greatly improved.

Two, actively promote the openness of factory affairs, continue to carry out the "four must visit" work.

In the company's safety production contracting work, we held many meetings to organize employee representatives and team leaders to discuss the overall ideas and details of the contract assessment. At the meeting, everyone spoke freely and put forward many reasonable suggestions, which made the assessment system of safety production contract in the work area more perfect and scientific. In the implementation of the contract assessment, it has also been supported and understood by the workers in the work area, and the identification and recommendation of sending college students and chief employees have been open, fair and just.

In the first half of the year, employees who continue to care about life difficulties will be sent greetings from the leaders of the company and the work area. Visited employees 13 person-times, distributed more than 4,700 yuan to solatium, and established files of employees with difficulties. In the company's donation of love cotton-padded clothes, the work area donated 209 pieces, which truly reflected the spirit of caring for society of the workers in the work area.

Third, care about the life of employees and carry out rich cultural and sports work.

Our trade union attaches great importance to caring for employees' interests in daily work and takes caring for employees' health as the principle. The focus of this year's work is to solve the problem of dining in the staff canteen, overcome various difficulties and complete; In the process of spring inspection, the canteen in the work area makes reasonable meals according to the tastes of employees and sends them to the work site, which fully embodies the purpose of the trade union to serve employees.

According to the actual situation of scattered personnel in the work area, regular mass cultural and sports work has been carried out. Each station uses the sports equipment equipped last year to check for physical exercise every day, and table tennis, badminton, billiards and other activities are carried out vividly. In the second half of the year, the trade union in the work area plans to use the gap stage of production to carry out competitions in the work area to promote exchanges between stations. The basketball team in the work area also fully coordinated the time, organized by the trade union, and conducted many exchange competitions in the work area. The football team in the work area also held friendly matches with other units and exchanged experiences, which benefited a lot. We also participated in the speech contest held by the company and achieved good results. At the same time, taking an active part in the photo contest of "Love Activities and Safe Project" and the collection of the emblem of xx Staff Art Festival also reflected the good mental outlook of substation staff. Do well in other aspects.

Make typesetting according to the work of the trade union at the beginning of the year. We have improved the hobby group in the work area, recruited employees with hobbies to join the club, and carried out rich activities after work, so that employees can organize themselves to introduce their experiences to each other and improve their respective levels. In addition, the website of the trade union in the work area has also completed the design work and entered the later stage of improvement and online.

In order to better complete the reporting work, this year we specially set up the work area publicity network to publish articles to companies, publications and websites in time to publicize the good deeds and news of enterprises and work areas, which has achieved great results.

The work in the first half of the year is over, and we have successfully completed the requirements of the company and the work layout formulated by the trade union in the work area. In the second half of the year, we will meet the company's inspection with more effective work.

I have been engaged in first-line electrician work since I started working. Over the years, I have been strict with myself and conscientious. Mainly summarized from the following aspects:

I ideological and political study and democratic management

I seriously studied Marxism-Leninism, Mao Zedong Thought and Deng Xiaoping Theory, and guided production practice with the spirit of "Theory of Three Represents". Actively participate in various democratic activities, participate in democratic management, take the factory as the home, work hard, and do a good job in producing first-line electricians.

Second, safety in production

1, carry out the spirit of the superior documents, improve employees' awareness of safe electricity use and enhance their sense of responsibility.

2. Implement and improve the organization system of safe electricity consumption, and improve the safety management rules and regulations.

3. Strengthen the safety management of power consumption of teams and groups, and lay a solid foundation for safety.

4, a guarantee, users should ensure their own safety and the safety of others.

Third, training and learning.

Over the years, I have actively participated in various kinds of study and training, and strived to learn the basic knowledge and training of electricians, knowledge of power supply system, line devices, lighting devices, grounding devices, transformers, motor maintenance and repair, machine tool electrical control circuits, plc control and other related knowledge systems. Every time I study, I learn some new theories, and apply them to guiding work practice and work, and improve the power supply system and control system of the factory, which has won unanimous praise.

Fourth, in terms of energy saving and consumption reduction.

In terms of energy saving, I have actively applied what I have learned and made a lot of contributions to the energy saving and consumption reduction of the factory. For example, in the aspect of line transformation, it saves more than 10 million kwh of electricity for the factory every year. At the same time, the old equipment in the factory was reformed electrically, which made some old equipment rejuvenated.

Verb (abbreviation of verb) is actually produced.

For example, examples of finding and eliminating electrical faults of motors in production practice. Electrical aspects: 1. Check whether the insulation of outgoing line is intact, whether the motor is overheated, whether its wiring meets the requirements of nameplate, and whether the winding and head and tail are correct; 2. Measure the insulation resistance and DC resistance to see if the insulation is damaged. Whether the winding is open, short-circuited and grounded; 3. Power-on inspection When problems are found after the above inspection, you can directly power-on the test, start to apply a lower voltage with the three-phase voltage regulator, and then gradually rise to the rated voltage. Using the above inspection methods, we can find faults and repair many motors in the factory. Summarize all kinds of fault phenomena and solutions in time, and record them to guide practice, and at the same time improve your professional level. In a word, we should strictly abide by the rules and regulations in production practice. Over the years, there has not been a life safety accident caused by electricity in the factory. After many technical transformations, the equipment operation is more scientific and reasonable.

Annual work summary, an electrician, comes from reading the annual work summary, an electrician.

An electrician's personal annual summary essay 3 1. Ideological and Political Learning and Democratic Management

I seriously study Marxism-Leninism and ideological theory, and use the spirit of "Theory of Three Represents" to guide production practice. Actively participate in various democratic activities, participate in democratic management, take the factory as the home, work hard, and do a good job in producing first-line electricians.

Second, safety in production

1, carry out the spirit of the superior documents, improve employees' awareness of safe electricity use and enhance their sense of responsibility.

2. Implement and improve the organization system of safe electricity consumption, and improve the safety management rules and regulations.

3. Strengthen the safety management of power consumption of teams and groups, and lay a solid foundation for safety.

4. Users should ensure the safety of themselves and others.

Third, training and learning.

Over the years, I have actively participated in various kinds of study and training, and strived to learn the basic knowledge and training of electricians, knowledge of power supply system, line devices, lighting devices, grounding devices, transformers, motor maintenance and repair, machine tool electrical control circuits, PLC control and other related knowledge systems. Every time I study, I learn some new theories, and apply them to guiding work practice and work, and improve the power supply system and control system of shopping malls, which has won unanimous praise.

Fourth, save energy and reduce consumption.

In terms of energy saving, I have actively applied what I have learned and made a lot of contributions to energy saving and consumption reduction in shopping malls. For example, in the transformation of shopping mall lines, hundreds of thousands of kilowatt-hours of electricity are saved for shopping malls every year. At the same time, the old equipment in the shopping mall was reformed electrically, which made some old equipment glow with new vitality.

Verb (abbreviation of verb) is actually produced.

1, find and eliminate examples of motor electrical faults.

(1) Check whether the lead insulation is good, whether the motor is overheated, whether the wiring meets the requirements of the nameplate, and whether the winding, head and tail are correct;

(2) Measure the insulation resistance and DC resistance to check whether the insulation is damaged. Whether the winding is open, short-circuited and grounded;

(3) Power-on inspection When problems are found after the above inspection, you can directly power-on the test, start to apply a lower voltage with the three-phase voltage regulator, and then gradually rise to the rated voltage. Using the above inspection methods, we can find faults for many motors in shopping malls and carry out maintenance.

2. Example of voltage appliance fault maintenance: voltage circuit breaker fault.

(1) contact overheating, can smell the smell of power distribution control cabinet. After inspection, the moving contact is not completely inserted into the static contact, and the contact pressure is not enough, which leads to the decrease of switch capacity and overheating of the contact. At this time, the operating mechanism should be adjusted so that the moving contact is completely inserted into the static contact. (2) When electrified, the flashover explosion is caused by long-term overload and poor contact of the contacts. When repairing this fault, we must pay attention to safety to prevent electric arc from harming people and equipment. After the load and contacts are overhauled and the no-load power supply is normal, the operation can be checked with load until it is normal. This kind of fault must pay attention to the daily maintenance of the equipment to avoid unnecessary harm.

Summarize all kinds of fault phenomena and solutions in time, and record them, guide practice and improve your professional level.

In short, in production practice, we should adhere to and strictly follow the rules and regulations. Over the years, there has not been a life safety accident caused by electricity in the shopping mall. After many technical transformations, the equipment operation in the shopping mall is more scientific and reasonable.

The time of electrician's personal annual summary is like running water, and 20×× years has become a thing of the past in a blink of an eye. Looking back on this year's work, there are gains and joys, but more importantly, it has gradually matured. The following is a summary of the work from the production dispatching room to the mechanical and electrical technology department in the past year:

First, the work of the production dispatching room is short and unforgettable.

After working in fully mechanized mining team for one year, I have practical experience and basic professional skills in fully mechanized mining face. I was transferred to the production dispatching room in October, 2000. The production dispatching room is the mine safety command center, the spokesperson for the mine manager to organize production, and an important department for scientific management of coal mines. The particularity and importance of his work determines that he must be familiar with the scene, have a calm, busy but not chaotic, decisive and flexible psychological quality and a high professional level, and handle daily production and unexpected accidents in strict accordance with procedures, which is an important way to ensure safe production.

As a member of the production dispatching room, I always remember to maintain the overall image of the mine as the core of my work. Through several months' humble study of the old masters and my continuous efforts, I have learned to be humble to the leaders, to help comrades enthusiastically, to analyze problems carefully, to sum up and reflect on mistakes, to speak forcefully, to do things resolutely, to find evidence, and to reward and punish fairly.

Second, the mechanical and electrical technology work, groping forward.

In August, 20×× years, he came to work in the mechanical and electrical technology department according to the company's arrangement, mainly responsible for the power supply of the whole mine. After half a month's familiarity with the power supply system of the whole mine, I seriously asked the teacher and accumulated the power supply diagram of the substation on the mine. After all, I still have professional theoretical knowledge of power supply, which is relatively easy to learn, but it is still difficult for me to quickly master the system of the whole mine, but I am very interested in power supply, so I will take the time to learn, starting with cable knowledge, the principle, performance and setting calculation of high-voltage circuits, and constantly improve my professional knowledge.

In September, we began to design the power supply system diagram and equipment layout diagram of 15202 working face. After continuous research with technicians and team leaders of fully mechanized mining team, and my frequent visits to fully mechanized mining face, the design of each place was continuously optimized, and finally the power supply scheme and equipment layout order were determined. In order to facilitate the employees of the fully mechanized mining team to hang the monorail, from the console to the last spray pump, a ceiling was designed above each moving car, which was praised by underground workers.

At the same time, it is responsible for the settlement of mine electricity charges. From the end of each month, it is necessary to carefully calculate the electricity consumption of electric meters in a timely manner, and assess all electricity users in strict accordance with the contracted indicators, so as to achieve clear rewards and punishments. According to the actual situation, the management system is constantly formulated, and practical measures are taken to save energy and reduce consumption, so as to realize cost control.

III. Stability and development in 20×× years

The year of 20××× is an important year for our mine to realize the leap-forward development of production capacity, and it is also a great opportunity for me to learn from the reform of fresh air well system and power supply design. Make full use of this opportunity to learn the power supply design, especially the setting protection calculation and equipment selection in combination with the actual situation of the mine. Make friends with peers, constantly enrich yourself, create an atmosphere of self-pressure, and constantly strive for personal goals.

Time flies, unconsciously, more than seven months slipped away in a hurry. Looking back, there are gains and shortcomings in electromechanical work. Focusing on the policy of safe production, we conscientiously implemented the "Coal Mine Safety Regulations", put people first, keep pace with the times, pay close attention to management, and basically realized the safe, installed, stable, economical and efficient operation of the electromechanical system. Through this past work, we have accumulated a lot of work experience and greatly enriched and improved in all aspects. Now we will make a summary report on the electromechanical work.

First, based on safety laws and regulations, strengthen the standardization of electromechanical safety and quality.

Standardization of safety quality is the fundamental way to improve the level of coal mines and build a long-term mechanism of safety production. Only when the standardization of safety and quality reaches and maintains a certain standard, and the enterprise is in a good state of safe production, can it adapt to and guarantee the life safety of employees and the needs of coal industry modernization.

1, development of electromechanical transportation conference

At the beginning of 20 10, the thinking of electromechanical work began to deal with electromechanical transportation, involving coal mine safety and mine-wide production. The purpose is to give full play to the advantages and efficiency of mechanical equipment and reduce the management, maintenance and maintenance operation level of electromechanical personnel. Combined with the above scheme, the Measures for Standardization and Evaluation of Safety and Quality of Coal Mine Electromechanical Transportation are formulated to evaluate and promote the production units to strengthen safety and quality standardization.

There are few targeted promotional activities in the company, which makes it impossible to convey the product information, performance and use to the end customers more deeply. Because of the ice-carrying operation mode formed by fishermen for many years, it has hindered fishermen's acceptance of new things. If people around you use the product and achieve the use effect, then the price of the product is acceptable. The key is that there are no users around you.

2, strengthen the management and maintenance of mechanical and electrical equipment.

Give full play to the advantages and efficiency of mechanical equipment, reduce electromechanical accidents, and improve the management, maintenance and repair operation level of mine electromechanical personnel.

(1) Maintain the main equipment in the air compressor room, main winch, ventilator, etc. regularly every month.

(2) Improve the equipment account, equipment plan and equipment management, and organize the mechanical and electrical cable warehouse and switch warehouse.

③ Strengthen and standardize equipment management, and improve the posting of various signs such as cables.

④ Standardized acceptance and electromechanical inspection are closely combined and complement each other. So as to improve the intact rate of equipment, reduce the failure rate of equipment and improve the safety factor underground.

3. Strengthen the education of safety concept. Start from me and implement safety production to everyone. In order to improve the safety awareness of each employee and strengthen the implementation of management methods and measures.

4, strengthen the monthly mechanical and electrical inspection, strengthen the usual investigation. Emphasis is placed on strengthening the investigation of equipment hidden dangers at ordinary times, which greatly reduces the failure rate of equipment and greatly curbs the occurrence of safety accidents.

I deeply feel the importance of the office comprehensive coordination department. The work of the office shoulders the functions of consultation, supervision, coordination and service. This half year's work practice made me realize that it is not easy to do a good job in the office. To do a good job, you must first know where you are and what responsibilities you have. In accordance with the division of labor, straighten the position, not offside, not leaving office, not offside, strictly abide by their duties, complete their own work. Only by taking a correct position, clarifying responsibilities, uniting with comrades, being sincere with others, being down-to-earth, being loyal to their duties, being diligent, starting from small things, being honest and conscientious, can we complete our work and then carry out our work creatively.

After that, every time he went to the business desk to handle business, he would repeatedly thank me. I was particularly happy to hear his praise, saying it was my duty. Later, he even advertised to the people next to him that he was very satisfied with our service.

Second, the mechanical and electrical training work is not in place.

Although every year, mechanical and electrical training is carried out in various units, due to employees' low awareness of learning, the training content is sometimes not targeted, and it is not easy to combine theory with practice. Some employees are not enthusiastic about learning, and the training goes through the motions, even "coping with errands", and they do not seriously study the courses arranged by the training units. In the future, we must pay close attention to mechanical and electrical training.

How to correct mistakes, carry forward achievements and prepare for new achievements in the next step need not be as specific as plans, but these plans are generally indispensable.

Thank you for reading and wish you a happy life.