Learn how to install the hood.

People like to remember local events anytime and anywhere, so they invented cameras. Cameras, from the simplest cassette cameras to film cameras, to digital cameras, to modern SLR cameras, are undoubtedly developing and recording beautiful things. So photographers are a very respected profession in modern society, so everyone attaches great importance to photographic equipment. So what I will explain to you today is the installation method of the range hood and the related contents of the range hood.

Before putting the hood into the lens, rotate it 90 degrees clockwise until it is fixed. At this time, the position of the circular pit should be aligned with the focal length indication. When installed correctly, the large hood on the hood should be in the up and down position. Do not forcibly install the hood. If you can't register, please check whether the location is correct. To remove the engine hood, turn it 90 counterclockwise and take it out. When the camera is not used, the hood can be installed upside down. When one of the big covers is installed on the lens, put the hood in front of the lens and rotate it 90 degrees clockwise until it clicks and is fastened. When the camera is covered with the lens cover, the hood can also be installed or removed. To remove the engine hood, turn it 90 counterclockwise and take it out. Under bright sunlight or backlight, the lens hood will minimize lens flash and ghosting. The hood can block the extra light and improve the picture quality. Check whether the camera is turned off and whether the lens is retracted.

Installation method of protective cover:

(1) Turn the camera upside down.

(2) Hook the hook into the lens cover adapter.

(3) Push the lens cover.

(4) Align the marks as shown in the figure.

(5) fixing screws. Check whether the screws are fixed, and then install the hood.

(6) Don't tighten the screws too tightly.

Precautions:

1. When a photo is taken with a flash with a hood installed, the lower part of the photo may turn black (vignetting effect) and the flash control may be disabled because the hood will dim the flash of the photo. It is recommended to remove the hood when shooting.

2. When using the autofocus auxiliary light in the dark, please remove the hood.

3. Detailed information about how to install MC protective mirror and nd filter.

If you lose the attachment, please consult the dealer or the nearest service center.

Today, I will explain the installation method of the camera hood and the related contents of the camera hood, which I believe can help you. There are many kinds of camera hoods, including hard plastic, metal and soft plastic. Although the functions of each range hood are similar, if they are distinguished in detail, they still have irreplaceable advantages. The hood of the camera must be installed according to the instructions, otherwise it is easy to damage the lens of the camera.