What if the lighting is not good? Three tricks to help you solve the lighting problem at home.

A house with good lighting always makes people feel warm and comfortable, while a house with poor lighting for a long time will not only affect the mood of residents, but also affect their health to a greater or lesser extent. If your home is not well lit, you should pay more attention when decorating!

First of all, on the issue of house lighting, try to follow a principle. If we can enhance natural lighting, we will enhance natural lighting. Natural lighting can't solve it, so take other measures!

In order to enhance the natural lighting of houses, natural light sources can generally be introduced to reduce light occlusion and improve indoor reflectivity. When the brightness of some areas of the house is still insufficient after enhancing natural lighting, the light source can be supplemented appropriately.

First, natural light sources are introduced to reduce light barriers.

The simplest way is to tear down the wall, and open the wall to reduce the light from being blocked by the wall without potential safety hazards. Especially between the living room and the balcony, you can make full use of the biggest lighting point in the whole house after getting through.

There are usually three ways to demolish and rebuild walls:

1, reduce the wall

Under the premise of not moving the load-bearing wall, all the walls that can be knocked out will be knocked out without obstructing the light.

2. Adopt the open mode.

If there is a space that does not need to pay attention to privacy, an open or semi-open design can be adopted as a soft partition or a semi-wall partition. For example, an open kitchen can make the whole space more spacious and transparent, and the lighting effect is better.

Step 3 make glass brick walls

For some rooms without windows but with privacy requirements, one of the non-load-bearing walls can be removed and replaced with translucent glass bricks or wooden grilles to facilitate lighting.

Second, improve indoor reflectivity.

It is not recommended to use dark decoration style, because large areas of dark color seriously affect indoor light reflection.

The closer to white, the stronger the ability to reflect light, so try to use white or light color as the main color for floor tiles and walls. Here, I would like to remind you that while using white or light colors in a large area, using local dark colors appropriately will make the room more layered.

In addition, if you want to improve the reflectivity, make the indoor light better and the visual effect more transparent and spacious. Mirrors can be placed in some places to enhance the reflectivity and transmittance of key areas.

Third, properly supplement the light source.

This is relatively simple. Generally speaking, where there is no bright spot, general commercial houses are often corridors, restaurants and other places. Supplementary light source has decorative effect and better effect.

Precautions for lighting installation:

1, distance from the wall

Downlights are generally far away from the wall, and spotlights generally need to be close to the wall. The wall here refers to the facade that needs to be illuminated.

Generally speaking, the recommended distance between surface-mounted spotlights and embedded spotlights and the wall is 20-40 cm. If washing the wall, it is recommended to be about 25-30cm. The beam angle should be about 25 degrees, and the track lamp should be about 45cm away from the wall.

2, lamp spacing

The distance between lights is not fixed, and it should be comprehensively analyzed according to the situation of the site and each apartment. Firstly, the positions of the spotlights at both ends are determined, and then the distance between the spotlights is allocated. Generally, the distance between spotlights is 80-200cm.

3, restaurant lighting layout

In the area where the main light is used, you can refer to the chandelier layout of shopping malls and restaurants, and then choose a focused light source to hit the food, which will make the food look particularly delicious; The height of the chandelier is suggested to be 70cm away from the dining table. When choosing the non-main light design, it is suggested to use two spotlights with a beam angle of about 10 degrees, which can achieve the atmosphere of a high-class restaurant. It is recommended to use 2-3 spotlights evenly distributed around the dining table.

(Hualong. Com synthesis)