How to use underwater camera

1: Be sure to turn on the machine switch button before starting. Never turn on or turn off the power under water, because this will make water enter the motherboard through the power switch button. If the machine shuts down automatically because it is not operated for a long time underwater, please float to the surface and turn on the power button!

2. Before launching, please carefully check whether the plastic packaging of the camera battery compartment is in good condition, pay attention to whether fine sand, hair or unknown particles are stuck on the yellow plastic packaging strip, and ensure that the plastic packaging is smooth and free of sundries, and then close the battery compartment. (Data cable warehouse is also available)

3. When entering the water, please tighten the wrist rope before shooting to prevent the camera from falling into the deep sea due to waves or carelessness. In addition, please hold the plastic anti-slip area of the underwater camera.

4. For underwater shooting, please use underwater mode (mode marked with small fish). The underwater mode also has an underwater macro mode, which can be used when shooting shrimp, small fish and seaweed leaves. Because the sea water is blue, if you don't use underwater mode, it is blue like paste. The underwater mode automatically supplements the red light, which makes the photo color reproduction higher and clearer.

5. When you come out of the water after using the camera, please soak the camera in clear water for 20 minutes to dilute the salt, otherwise the salt particles will get stuck in the gap of the operation key, which will lead to the failure of the operation key.

6. When taking the battery, please make sure that the battery opening is facing down (it is very important to prevent water from flowing back into the battery compartment, and entering a small amount of water may cause problems with the motherboard), wipe off the water drops around the battery compartment with a rag, and then take the battery out with the opening facing down. After taking out the battery, don't close the battery box in a hurry, let the battery box open downwards, and air dry for a while before proceeding to the next operation.