How to set the photos taken by SLR camera during the day to achieve the best state,

In order to achieve good quality photos, you can make the following settings:

1)RAW format shooting can retain the most information and the largest post-processing space;

2) Correct white balance setting. Generally, automatic white balance is possible. If there is a little color cast, you can choose different custom white balances, such as cloudy days and cloudy days, or you can set the white balance through the color temperature.

3) Correct the ISO setting. Generally speaking, the lower the ISO, the better the image quality. However, it should be set according to the actual situation, and the shutter should not be slow, because the ISO is too low, and blurred photos will be taken.

4) Appropriate aperture size. Set the aperture value at the best aperture of the lens without affecting the shooting intention. Generally, the best aperture is not the maximum and minimum aperture of the lens, but a relatively middle aperture value, such as F8, F5.6 and so on.

5) The shutter should not be too slow, as I said just now, otherwise the photo may be blurred by the vibration of the machine.

6) If conditions permit, tripod, cable releaser, reflector and CPL polarizer can be used.

If you can understand the meaning of the above settings and set the shooting parameters of the camera according to the specific situation, the photos with the best quality will be discharged under the same conditions. However, image quality is only a small aspect of a photo. Content, composition and shooting time are the most important factors to determine whether a photo is always good or not, which is often decided by the photographer rather than the camera.