In what weather can I use inflatable cushions?

You can keep out the tide in hot weather and keep warm in cold weather!

1, used for the first time

Deploy air cushion

Open the air valve to make the air cushion bed expand automatically. Close the air nozzle, fold the air cushion bed in half repeatedly, then press it hard for a few times, and then open the valve to make the air cushion bed expand automatically, so that it can fully recover its elasticity and shape.

2. Inflating method

Open the air cushion and the air nozzle, and the air cushion bed will unfold automatically.

Please wait until the expansion of the air cushion bed is completed, and then tighten the valve cover.

Adjust the air pressure and its comfortable hardness.

Note: If it is stored in a roll for a long time (not recommended), please blow it with your mouth several times to restore elasticity.

3. Exhaust method

Open the air nozzle, roll it up from the other end of the air nozzle and press out the air.

Close the air valve, roll up the air cushion bed from the other end, and open the air valve again to discharge the residual air.

Finally, close the valve to save the rolled state at any time.

Note: please put it in the outer bag when carrying it to avoid scratching.

4. Storage method

Unfold the air cushion, open the air nozzle and put it in a cool and dry place (such as under the bed or behind the sofa). ), because the sponge of the air cushion bed has a memory shape, it can be quickly expanded into the most commonly used shape.

5, repair method

Confirm the leaking place: close the valve after inflation, wet the surface with water or thin soapy water, fold it in half, and press it with your knees. The bubbling place is not just the leaking place, so please mark it.

Small hole repair: thoroughly dry the air cushion bed, release air, and drop adhesive on the hole. Because the air is exhausted, the adhesive will be inhaled to seal the hole. Then the adhesive hardens.

Repair of major damage: thoroughly dry and deflate the air cushion bed, and apply glue on the repair cloth, or apply glue on the holes on the surface of the air cushion bed, dry for 30 seconds to 3 minutes (depending on the temperature), stick it on the damaged part, flatten it and keep it for 4 hours before use.

6, clean

Expand the air cushion bed to the maximum, close the valve, clean it in the bathtub with a soft brush and low-stimulation household degreasing detergent or lotion, rinse it thoroughly with water, and store it after it is completely dried.

Matters needing attention

Keep away from sharp objects (thorny plants or sharp stones or blades).

When the tent is not used, please put a bottom cloth under the air cushion bed.

Do not use it as a floating tool.

Stay away from flames or sparks.

When the temperature is high, do not put the inflatable air cushion bed in the car or tent, and close the valve.

Do not touch sunscreen or alkaline drugs.

Don't be exposed to the sun for a long time, ultraviolet rays will slowly damage the surface materials.

Please put it out of the reach of pets.

The air nozzle is hard, so you should avoid it when you rest.