Traditional Culture Encyclopedia - Tourist attractions - How to water plants when going out 5 ways to water plants when going out.

How to water plants when going out 5 ways to water plants when going out.

Directory method 1: make water supply bottles 1 to ensure that the soil has enough water. 2. Find a bottle with a long and narrow opening. 3. Pour water into the bottle, then block the bottle mouth with your thumb and turn the whole bottle mouth upside down. 4. Stuff the bottle mouth into the soil. 5. Check whether the water in the bottle can flow out smoothly. Method 2: Make a series drip irrigation device 1, and let the soil "drink enough water" first. 2. Put a pot with a capacity of about 4 liters next to the plant. 3. Cut a long cotton thread or nylon thread. 4. Put one end of the thread in the jar. 5. Bury the other end of the line in the bottom of the flowerpot. 6. Fill the jar with water. 7. The mouth of the jar must be higher than the root of the plant. Method 3: Make bottle drip irrigation device 1. First, make sure the soil is completely wet. 2. Prepare a 2-liter bottle. 3. Dig two holes in the bottom of the bottle with a hammer and nails. 4. Punch 3 to 5 holes in the bottle. 5. Dig a hole next to the plant. 6. Fill the bottle with water, and then insert the bottle into the soil. 7. Cover the bottle cap if necessary. Method 4: Ask friends or neighbors for help 1. Ask a trusted friend or neighbor for help. 2. The requirements should be reasonable. 3. According to different water requirements, plants are classified and placed. 4. Write down the matters that need special attention. 5. Water the plants before going out, and check whether the plants have diseases and insect pests. 6. Offer to repay each other. Method 5: Build a mini greenhouse 1 and find a big transparent plastic bag, which is big enough to cover the whole flowerpot. 2. Put a wet towel at the bottom of the bag and put the plants on the towel. 3. Tie the plastic bag tightly and fill it with air as much as possible. 4. Move the plant to a place where there is no direct sunlight. 5. Put a big pot of plants in the bathtub. Everyone needs to travel and relax from time to time. When traveling, we usually entrust our pets to friends, neighbors or our own places, but what about plants? Some plants can survive without watering for a long time, and some need to be cared for once a week or even once a day. Before going out, we must make sure that the plants get enough water when their owners are away. Sometimes, plants can survive safely without the help of friends or neighbors.

Methods 1: The water bottle was made.

1, to ensure that the soil has enough water. Dry soil will completely absorb the water in the bottle. If the soil feels dry, let the plants drink enough water quickly.

2. Find a bottle with a long and narrow opening. A red wine bottle is ideal because it is big enough to supply 0.4 to 0.6 square meters of soil with water for three days. If the soil to be watered is not very big, use a smaller bottle, such as a coke bottle or a beer bottle. In addition, you can also buy automatic watering devices for glass balls in the garden store.

3. Pour water into the bottle, then block the bottle mouth with your thumb and turn the whole bottle mouth upside down. Don't fill the bottle, it's enough that the water level reaches the bottleneck. At this time, you can also supplement nutrients such as liquid fertilizer. Block the bottle with your thumb, then turn it upside down and put it next to the plants that need watering.

4. Stuff the bottle mouth into the soil. Pull out your thumb when the bottleneck pushes into the soil. Bottlenecks need to be buried in the soil at least a few centimeters deep. It doesn't matter if the bottle falls to one side, as long as it is fixed and not shaken.

5. Check whether the water in the bottle can flow out smoothly. If the water doesn't come out at all, it means that the bottle mouth is blocked by mud. In this case, you can take the bottle out of the soil, clean up the soil blocking the bottle mouth, then cover the bottle mouth with gauze, then fill it with water and reinsert the bottle into the soil. Mark the bottle with a marker to indicate the water level. Check the bottle after a few hours or a day. If the water level drops below the marking line, it means that water can seep out normally. If the water level hasn't changed, it means that the bottle mouth is blocked by something.

Method 2: Make a series drip irrigation device.

1, let the soil drink enough water first. If the soil is too dry, the water in the pot will be sucked up before you go out, and there will be no water when you come back. So before using the string drip irrigation device, pour the water clean, so you don't have to worry about the above situation.

2. Put a pot with a capacity of about 4 liters next to the plant. The jar should be placed out of direct sunlight to reduce water evaporation. If you are only away for a few days, and there are relatively few plants that need watering, then a smaller food jar is enough. Don't worry about pouring water into the jar yet. This method can provide water for plants for a week.

3. Cut a long cotton thread or nylon thread. One end of the line should touch the bottom of the pot, and the other end should extend to the roots of plants, so the line must be long enough. If you can't find cotton thread or nylon thread, or the thread you have is too thin, twist three cotton threads into one to make do. The thread must be absorbent, otherwise this method will not work.

4. Put one end of the thread in the jar. The thread must touch the bottom of the bottle. If you want to water several pots of plants, prepare more pots, so that each pot of plants has a separate pot to carry water, and you don't have to worry about running out of water when you go out. If you have some succulents that don't need much water, one pot can satisfy two or three pots of plants at the same time. Even if the water in the jar is used up, plants can still survive well because they can store water in their bodies.

5. Bury the other end of the line in the bottom of the flowerpot. The buried length should be about 8cm. At the same time, ensure that the wires are not exposed to direct sunlight. Part of the light doesn't matter, but if the light is too strong, the cotton thread will be dried before transporting water to the roots of plants.

6. Fill the jar with water. If plants need fertilizer, add it to the water now! If the plant is placed in a sunny place, it is recommended to seal the jar mouth with adhesive tape, but be careful not to stick to the cotton thread. Doing so can slow down the evaporation of water.

7. The mouth of the jar must be higher than the root of the plant. If the jar is too short, put a book, a piece of wood or a dropped flowerpot under it and raise the jar a little. This is done to ensure that the water in the pipeline is transported from high to low.

Method 3: Make a bottle drip irrigation device.

1. First, make sure the soil is completely wet. If the soil is too dry, the water in the bottle will be sucked dry before you leave home. Watering the soil first can ensure that the plants will not consume the water in the bottle so quickly.

2. Prepare a 2-liter bottle. If the plant is small, it is enough to make a drip irrigation device with a small bottle. This method needs to bury the bottle in the soil, so it is most suitable for supplying water to plants planted in gardens or large containers.

3. Dig two holes in the bottom of the bottle with a hammer and nails. This step is very critical. If there is no hole in the bottom of the bottle, water will not seep out, and still water will breed algae.

4. Punch 3 to 5 holes in the bottle. Don't poke too many holes, three or five are enough. Too many holes will lead to rapid water flow, which is exactly what you don't want to happen. Cut all the holes in one side of the bottle. When the bottle is buried in the soil, you need to turn the bottle body so that the hole is aimed at the plants to be watered.

It's better to cut fewer holes at first. If there are not enough holes, you can dig again. Otherwise, it won't be so easy to make up the extra holes.

5. Dig a hole next to the plant. The pit should be deep enough to bury the bottle, leaving only the bottleneck exposed.

6. Fill the bottle with water, and then insert the bottle into the soil. Liquid fertilizer can be added in this step. Pat the soil around the bottle gently, and be careful not to let the soil enter the bottle.

7. Cover the bottle cap if necessary. Bottle caps can slow down the speed of water flow; For those plants that don't need water very much, the role of bottle caps is very important. If you need to leave for a long time, tighten the bottle cap-the tighter it is, the slower the water will flow out. Mark the water level in the bottle with a marker. Go back and check it in a few hours. If the water level has not changed, loosen the bottle cap; If the water level drops sharply, tighten the bottle cap.

Method 4: Ask friends or neighbors for help.

1. Ask a trusted friend or neighbor for help. This person should be able to enter your backyard or even your house (if you have indoor plants to water), so he must be honest and reliable. Don't forget to give them the spare key at home so that they can water you smoothly.

2. The requirements should be reasonable. If the helper lives far away or it is difficult to get to your house, you'd better not disturb others. You should think about each other and try to keep them away as little as possible. Some people may not mind going once or twice a week, but it's a bit too much to go every day, especially those who live far away. Don't burden others. I suggest you make a watering device yourself. In this way, plants can rely on these devices to get water, and the helper only needs to fill the container with water after it is empty.

3. According to different water requirements, plants are classified and placed. In this way, your friends or neighbors will know better which plants should be watered. For example, you can put all succulents on one side and vines on the other. In order to keep the house clean and tidy, it is suggested to put plants on a tray.

4. Write down the matters that need special attention. Write in detail, but don't be too complicated, and don't assume that the other party will understand. Your friends or neighbors may not be as proficient in gardening as you are, so information that is very basic to you may be very strange to them. For example, the detailed watering instructions can be written as follows: water the plants with half a glass of water every Saturday night.

If the plants need special care, you can write: Empty the extra water in the plate under the basil flowerpot every day.

5. Water the plants before going out, and check whether the plants have diseases and insect pests. Watering in advance is to reduce the burden of helpers, and checking whether plants have suffered from diseases and pests is to ensure the healthy growth of plants when their owners are away. If plants languish because of pests or diseases, people who help care for them may be at a loss; If plants die under the care of friends or neighbors, they will also feel guilty.

6. Offer to repay each other. Even if you know that a friend or neighbor will say "no", thank you out of courtesy. This is to assure the other party that you are not using them. Next time you go out and need help watering, they will be more willing to help. If the other party accepts your return, then you must keep your word!

Method 5: Build a mini greenhouse.

1, find a big transparent plastic bag, big enough to cover the whole flowerpot. With plastic bags, the water vapor released by plants will be intercepted, condensed and dripped back to plants. Plastic bags must be transparent so that sunlight can shine on plants through plastic bags.

2. Put a wet towel at the bottom of the bag and put the plants on the towel. Towels can keep plants moist and prevent the soil from drying out. Put as many plants as possible on the towel. The leaves of different plants can just touch each other and cannot be squeezed together. If the plants are too crowded, prepare a plastic bag.

3. Tie the plastic bag tightly and fill it with air as much as possible. Rubber bands or belts can be used to fix the opening of plastic bags. To be safer, you can even fold off the tied part and tie a rubber band on it.

4. Move the plant to a place where there is no direct sunlight. Plants can be placed indoors or outdoors, but be sure to avoid direct sunlight-some light will do. The heat generated by direct sunlight will gather in plastic bags and cover the plants.

5. Put a big pot of plants in the bathtub. If the plants are too big to be covered with plastic bags, put plastic sheets and some newspapers at the bottom of the bathtub. Put the plants in the bathtub and start watering them until the newspaper is soaked. Finally, draw the shower curtain and you're done. The light in the bathroom can always be on.

Tip: Moving potted plants indoors can make the water in the watering device last longer.

Think about how long you will be away. If you just go out for the weekend, just water the plants thoroughly the night before you go out.

Consider the local climate. If you live in a dry and hot climate, a bottle of water is far from meeting the needs of plants. Asking neighbors to help pour water is a better solution.

Consider the species of plants. Young plants need more careful care than adult plants.

If you let others take care of plants, you must find opportunities to repay them, otherwise they will not help next time.

Test the watering device a few days before leaving home to make sure it works properly.

Self-made drip irrigation system, timer or other automatic irrigation equipment. These devices do not need to be advanced or durable. Punch a few holes in the proper position of the ordinary hose, and then connect the faucet with timer with the hose to complete a simple drip irrigation device.

Warning: None of these methods can solve the problem of watering plants for a long time.

You'd better be careful when you tell others the news that you are going out.

You need to prepare